Read the Docs build information Build id: 566149 Project: cerebras-systems-cerebras-systems-developer-documentation Version: latest Commit: 7e1eff38a3009fa8e1ed2be38556375814199d86 Date: 2021-02-18T22:53:44.664813Z State: finished Success: True [rtd-command-info] start-time: 2021-02-18T22:53:46.091067Z, end-time: 2021-02-18T22:53:48.019275Z, duration: 1, exit-code: 0 git clone --no-single-branch --depth 50 git@github.com:Cerebras/documentation.git . Cloning into '.'... Warning: Permanently added 'github.com,192.30.255.113' (RSA) to the list of known hosts. [rtd-command-info] start-time: 2021-02-18T22:53:48.330801Z, end-time: 2021-02-18T22:53:48.394379Z, duration: 0, exit-code: 0 git checkout --force origin/main Note: checking out 'origin/main'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b HEAD is now at 7e1eff3 Merge pull request #73 from Cerebras/docs-0.6.3 [rtd-command-info] start-time: 2021-02-18T22:53:48.531808Z, end-time: 2021-02-18T22:53:48.588163Z, duration: 0, exit-code: 0 git clean -d -f -f [rtd-command-info] start-time: 2021-02-18T22:53:49.692234Z, end-time: 2021-02-18T22:53:53.736922Z, duration: 4, exit-code: 0 python3.7 -mvirtualenv Using base prefix '/home/docs/.pyenv/versions/3.7.9' New python executable in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/bin/python3.7 Also creating executable in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/bin/python Installing setuptools, pip, wheel... done. [rtd-command-info] start-time: 2021-02-18T22:53:53.861191Z, end-time: 2021-02-18T22:53:55.486812Z, duration: 1, exit-code: 0 python -m pip install --upgrade --no-cache-dir pip setuptools==41.0.1 Requirement already satisfied: pip in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (21.0.1) Collecting setuptools==41.0.1 Downloading setuptools-41.0.1-py2.py3-none-any.whl (575 kB) Installing collected packages: setuptools Attempting uninstall: setuptools Found existing installation: setuptools 53.0.0 Uninstalling setuptools-53.0.0: Successfully uninstalled setuptools-53.0.0 Successfully installed setuptools-41.0.1 [rtd-command-info] start-time: 2021-02-18T22:53:55.610665Z, end-time: 2021-02-18T22:54:04.092538Z, duration: 8, exit-code: 0 python -m pip install --upgrade --no-cache-dir docutils==0.14 mock==1.0.1 pillow==5.4.1 alabaster>=0.7,<0.8,!=0.7.5 six commonmark==0.8.1 recommonmark==0.5.0 sphinx<2 sphinx-rtd-theme<0.5 readthedocs-sphinx-ext<2.2 Collecting docutils==0.14 Downloading docutils-0.14-py3-none-any.whl (543 kB) Collecting mock==1.0.1 Downloading mock-1.0.1.zip (861 kB) Collecting pillow==5.4.1 Downloading Pillow-5.4.1-cp37-cp37m-manylinux1_x86_64.whl (2.0 MB) Collecting alabaster!=0.7.5,<0.8,>=0.7 Downloading alabaster-0.7.12-py2.py3-none-any.whl (14 kB) Collecting six Downloading six-1.15.0-py2.py3-none-any.whl (10 kB) Collecting commonmark==0.8.1 Downloading commonmark-0.8.1-py2.py3-none-any.whl (47 kB) Collecting recommonmark==0.5.0 Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB) Collecting sphinx<2 Downloading Sphinx-1.8.5-py2.py3-none-any.whl (3.1 MB) Collecting sphinx-rtd-theme<0.5 Downloading sphinx_rtd_theme-0.4.3-py2.py3-none-any.whl (6.4 MB) Collecting readthedocs-sphinx-ext<2.2 Downloading readthedocs_sphinx_ext-2.1.3-py2.py3-none-any.whl (11 kB) Collecting future Downloading future-0.18.2.tar.gz (829 kB) Collecting Jinja2>=2.9 Downloading Jinja2-2.11.3-py2.py3-none-any.whl (125 kB) Collecting requests Downloading requests-2.25.1-py2.py3-none-any.whl (61 kB) Collecting babel!=2.0,>=1.3 Downloading Babel-2.9.0-py2.py3-none-any.whl (8.8 MB) Collecting snowballstemmer>=1.1 Downloading snowballstemmer-2.1.0-py2.py3-none-any.whl (93 kB) Collecting packaging Downloading packaging-20.9-py2.py3-none-any.whl (40 kB) Collecting sphinxcontrib-websupport Downloading sphinxcontrib_websupport-1.2.4-py2.py3-none-any.whl (39 kB) Collecting imagesize Downloading imagesize-1.2.0-py2.py3-none-any.whl (4.8 kB) Collecting Pygments>=2.0 Downloading Pygments-2.8.0-py3-none-any.whl (983 kB) Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx<2) (41.0.1) Collecting pytz>=2015.7 Downloading pytz-2021.1-py2.py3-none-any.whl (510 kB) Collecting MarkupSafe>=0.23 Downloading MarkupSafe-1.1.1-cp37-cp37m-manylinux2010_x86_64.whl (33 kB) Collecting certifi>=2017.4.17 Downloading certifi-2020.12.5-py2.py3-none-any.whl (147 kB) Collecting idna<3,>=2.5 Downloading idna-2.10-py2.py3-none-any.whl (58 kB) Collecting chardet<5,>=3.0.2 Downloading chardet-4.0.0-py2.py3-none-any.whl (178 kB) Collecting urllib3<1.27,>=1.21.1 Downloading urllib3-1.26.3-py2.py3-none-any.whl (137 kB) Collecting pyparsing>=2.0.2 Downloading pyparsing-2.4.7-py2.py3-none-any.whl (67 kB) Collecting sphinxcontrib-serializinghtml Downloading sphinxcontrib_serializinghtml-1.1.4-py2.py3-none-any.whl (89 kB) Building wheels for collected packages: mock, future Building wheel for mock (setup.py): started Building wheel for mock (setup.py): finished with status 'done' Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23755 sha256=86e27ca9236115c1e9b217121568c202aa1215b8e08666bbb335a3094ac8f3a9 Stored in directory: /tmp/pip-ephem-wheel-cache-4yk85y33/wheels/7a/94/b1/0fdc5339a5bd487a5cc15421ec200d9ba3e2aa7190e4a727f1 Building wheel for future (setup.py): started Building wheel for future (setup.py): finished with status 'done' Created wheel for future: filename=future-0.18.2-py3-none-any.whl size=491059 sha256=49a000a30cc3ad168df8322c89d0812f68a7ed69a31a997c99fad1e45ae261c2 Stored in directory: /tmp/pip-ephem-wheel-cache-4yk85y33/wheels/56/b0/fe/4410d17b32f1f0c3cf54cdfb2bc04d7b4b8f4ae377e2229ba0 Successfully built mock future Installing collected packages: urllib3, sphinxcontrib-serializinghtml, pytz, pyparsing, MarkupSafe, idna, chardet, certifi, sphinxcontrib-websupport, snowballstemmer, six, requests, Pygments, packaging, Jinja2, imagesize, future, docutils, babel, alabaster, sphinx, commonmark, sphinx-rtd-theme, recommonmark, readthedocs-sphinx-ext, pillow, mock Successfully installed Jinja2-2.11.3 MarkupSafe-1.1.1 Pygments-2.8.0 alabaster-0.7.12 babel-2.9.0 certifi-2020.12.5 chardet-4.0.0 commonmark-0.8.1 docutils-0.14 future-0.18.2 idna-2.10 imagesize-1.2.0 mock-1.0.1 packaging-20.9 pillow-5.4.1 pyparsing-2.4.7 pytz-2021.1 readthedocs-sphinx-ext-2.1.3 recommonmark-0.5.0 requests-2.25.1 six-1.15.0 snowballstemmer-2.1.0 sphinx-1.8.5 sphinx-rtd-theme-0.4.3 sphinxcontrib-serializinghtml-1.1.4 sphinxcontrib-websupport-1.2.4 urllib3-1.26.3 [rtd-command-info] start-time: 2021-02-18T22:54:04.219647Z, end-time: 2021-02-18T22:54:08.171358Z, duration: 3, exit-code: 0 python -m pip install --exists-action=w --no-cache-dir -r external/requirements.txt Collecting sphinx_copybutton Downloading sphinx_copybutton-0.3.1-py3-none-any.whl (10 kB) Collecting sphinx_panels Downloading sphinx_panels-0.5.2-py3-none-any.whl (87 kB) Collecting readthedocs-sphinx-search Downloading readthedocs_sphinx_search-0.1.0-py3-none-any.whl (26 kB) Collecting sphinx_book_theme Downloading sphinx_book_theme-0.0.39-py3-none-any.whl (86 kB) Collecting beautifulsoup4 Downloading beautifulsoup4-4.9.3-py3-none-any.whl (115 kB) Collecting docutils>=0.15 Downloading docutils-0.16-py2.py3-none-any.whl (548 kB) Collecting pydata-sphinx-theme~=0.4.1 Downloading pydata_sphinx_theme-0.4.3-py3-none-any.whl (2.1 MB) Requirement already satisfied: sphinx in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx_book_theme->-r external/requirements.txt (line 4)) (1.8.5) Collecting pyyaml Downloading PyYAML-5.4.1-cp37-cp37m-manylinux1_x86_64.whl (636 kB) Collecting click Downloading click-7.1.2-py2.py3-none-any.whl (82 kB) Requirement already satisfied: six>=1.5 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (1.15.0) Requirement already satisfied: imagesize in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (1.2.0) Requirement already satisfied: Pygments>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.8.0) Requirement already satisfied: packaging in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (20.9) Requirement already satisfied: sphinxcontrib-websupport in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (1.2.4) Requirement already satisfied: requests>=2.0.0 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.25.1) Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (41.0.1) Requirement already satisfied: Jinja2>=2.3 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.11.3) Requirement already satisfied: alabaster<0.8,>=0.7 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (0.7.12) Requirement already satisfied: snowballstemmer>=1.1 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.1.0) Requirement already satisfied: babel!=2.0,>=1.3 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.9.0) Requirement already satisfied: pytz>=2015.7 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from babel!=2.0,>=1.3->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2021.1) Requirement already satisfied: MarkupSafe>=0.23 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from Jinja2>=2.3->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (1.1.1) Requirement already satisfied: certifi>=2017.4.17 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from requests>=2.0.0->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2020.12.5) Requirement already satisfied: chardet<5,>=3.0.2 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from requests>=2.0.0->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (4.0.0) Requirement already satisfied: idna<3,>=2.5 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from requests>=2.0.0->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.10) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from requests>=2.0.0->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (1.26.3) Collecting sphinx Downloading Sphinx-3.5.1-py3-none-any.whl (2.8 MB) Collecting sphinxcontrib-qthelp Downloading sphinxcontrib_qthelp-1.0.3-py2.py3-none-any.whl (90 kB) Requirement already satisfied: sphinxcontrib-serializinghtml in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (1.1.4) Collecting sphinxcontrib-jsmath Downloading sphinxcontrib_jsmath-1.0.1-py2.py3-none-any.whl (5.1 kB) Collecting sphinxcontrib-devhelp Downloading sphinxcontrib_devhelp-1.0.2-py2.py3-none-any.whl (84 kB) Collecting sphinxcontrib-applehelp Downloading sphinxcontrib_applehelp-1.0.2-py2.py3-none-any.whl (121 kB) Collecting sphinxcontrib-htmlhelp Downloading sphinxcontrib_htmlhelp-1.0.3-py2.py3-none-any.whl (96 kB) Collecting soupsieve>1.2 Downloading soupsieve-2.2-py3-none-any.whl (33 kB) Requirement already satisfied: pyparsing>=2.0.2 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from packaging->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.4.7) Installing collected packages: sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, docutils, sphinx, soupsieve, pyyaml, pydata-sphinx-theme, click, beautifulsoup4, sphinx-panels, sphinx-copybutton, sphinx-book-theme, readthedocs-sphinx-search Attempting uninstall: docutils Found existing installation: docutils 0.14 Uninstalling docutils-0.14: Successfully uninstalled docutils-0.14 Attempting uninstall: sphinx Found existing installation: Sphinx 1.8.5 Uninstalling Sphinx-1.8.5: Successfully uninstalled Sphinx-1.8.5 Successfully installed beautifulsoup4-4.9.3 click-7.1.2 docutils-0.16 pydata-sphinx-theme-0.4.3 pyyaml-5.4.1 readthedocs-sphinx-search-0.1.0 soupsieve-2.2 sphinx-3.5.1 sphinx-book-theme-0.0.39 sphinx-copybutton-0.3.1 sphinx-panels-0.5.2 sphinxcontrib-applehelp-1.0.2 sphinxcontrib-devhelp-1.0.2 sphinxcontrib-htmlhelp-1.0.3 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-qthelp-1.0.3 [rtd-command-info] start-time: 2021-02-18T22:54:09.075582Z, end-time: 2021-02-18T22:54:09.131843Z, duration: 0, exit-code: 0 cat external/source/conf.py # Configuration file for the Sphinx documentation builder. # # This file only contains a selection of the most common options. For a full # list see the documentation: # https://www.sphinx-doc.org/en/master/usage/configuration.html # -- Path setup -------------------------------------------------------------- # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. # # import os # import sys # sys.path.insert(0, os.path.abspath('lib/python3.6/site-packages')) # -- Project information ----------------------------------------------------- project = 'Cerebras Developer' copyright = '2021, Cerebras Systems' author = '' html_title = "Cerebras Systems Documentation" html_logo = "images/CER_logo.svg" html_favicon = 'images/cs-favicon.png' html_last_updated_fmt = '%b, %d, %Y' # -- General configuration --------------------------------------------------- # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom # ones. extensions = [ "sphinx_copybutton", "sphinx_panels", ] # Add any paths that contain templates here, relative to this directory. templates_path = ["_templates"] html_additional_pages = { } # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. # This pattern also affects html_static_path and html_extra_path. exclude_patterns = [] # -- Options for HTML output ------------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. # html_theme = "sphinx_book_theme" html_theme_path = [] panels_add_bootstrap_css = False html_theme_options = { } # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = ['_static'] html_css_files = [ 'custom-css-for-sphinx-book-theme.css' ] ########################################################################### # auto-created readthedocs.org specific configuration # ########################################################################### # # The following code was added during an automated build on readthedocs.org # It is auto created and injected for every build. The result is based on the # conf.py.tmpl file found in the readthedocs.org codebase: # https://github.com/rtfd/readthedocs.org/blob/master/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl # import importlib import sys import os.path from six import string_types from sphinx import version_info # Get suffix for proper linking to GitHub # This is deprecated in Sphinx 1.3+, # as each page can have its own suffix if globals().get('source_suffix', False): if isinstance(source_suffix, string_types): SUFFIX = source_suffix elif isinstance(source_suffix, (list, tuple)): # Sphinx >= 1.3 supports list/tuple to define multiple suffixes SUFFIX = source_suffix[0] elif isinstance(source_suffix, dict): # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes SUFFIX = list(source_suffix.keys())[0] # make a ``list()`` for py2/py3 compatibility else: # default to .rst SUFFIX = '.rst' else: SUFFIX = '.rst' # Add RTD Static Path. Add to the end because it overwrites previous files. if not 'html_static_path' in globals(): html_static_path = [] if os.path.exists('_static'): html_static_path.append('_static') # Add RTD Theme only if they aren't overriding it already using_rtd_theme = ( ( 'html_theme' in globals() and html_theme in ['default'] and # Allow people to bail with a hack of having an html_style 'html_style' not in globals() ) or 'html_theme' not in globals() ) if using_rtd_theme: theme = importlib.import_module('sphinx_rtd_theme') html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} if 'html_theme_path' in globals(): html_theme_path.append(theme.get_html_theme_path()) else: html_theme_path = [theme.get_html_theme_path()] if globals().get('websupport2_base_url', False): websupport2_base_url = 'https://readthedocs.com/websupport' websupport2_static_url = 'https://assets.readthedocs.com/' #Add project information to the template context. context = { 'using_theme': using_rtd_theme, 'html_theme': html_theme, 'current_version': "latest", 'version_slug': "latest", 'MEDIA_URL': "https://media.readthedocs.com/media/", 'STATIC_URL': "https://assets.readthedocs.com/", 'PRODUCTION_DOMAIN': "readthedocs.com", 'versions': [ ], 'downloads': [ ("pdf", "//docs.cerebras.net/_/downloads/en/latest/pdf/"), ("html", "//docs.cerebras.net/_/downloads/en/latest/htmlzip/"), ], 'subprojects': [ ], 'slug': 'cerebras-systems-cerebras-systems-developer-documentation', 'name': u'Cerebras Systems Developer Documentation', 'rtd_language': u'en', 'programming_language': u'words', 'canonical_url': 'https://docs.cerebras.net/en/latest/', 'analytics_code': 'UA-177830181-2', 'single_version': False, 'conf_py_path': '/external/source/', 'api_host': 'https://readthedocs.com', 'github_user': 'Cerebras', 'proxied_api_host': '/_', 'github_repo': 'documentation', 'github_version': 'main', 'display_github': True, 'bitbucket_user': 'None', 'bitbucket_repo': 'None', 'bitbucket_version': 'main', 'display_bitbucket': False, 'gitlab_user': 'None', 'gitlab_repo': 'None', 'gitlab_version': 'main', 'display_gitlab': False, 'READTHEDOCS': True, 'using_theme': (html_theme == "default"), 'new_theme': (html_theme == "sphinx_rtd_theme"), 'source_suffix': SUFFIX, 'ad_free': False, 'docsearch_disabled': False, 'user_analytics_code': 'UA-177830181-2', 'global_analytics_code': 'UA-17997319-2', 'commit': '7e1eff38', } # For sphinx >=1.8 we can use html_baseurl to set the canonical URL. # https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-html_baseurl if version_info >= (1, 8): if not globals().get('html_baseurl'): html_baseurl = context['canonical_url'] context['canonical_url'] = None if 'html_context' in globals(): html_context.update(context) else: html_context = context # Add custom RTD extension if 'extensions' in globals(): # Insert at the beginning because it can interfere # with other extensions. # See https://github.com/rtfd/readthedocs.org/pull/4054 extensions.insert(0, "readthedocs_ext.readthedocs") else: extensions = ["readthedocs_ext.readthedocs"] # Add External version warning banner to the external version documentation if 'branch' == 'external': extensions.insert(1, "readthedocs_ext.external_version_warning") readthedocs_vcs_url = 'None' readthedocs_build_url = 'https://readthedocs.com/projects/cerebras-systems-cerebras-systems-developer-documentation/builds/566149/' project_language = 'en' # User's Sphinx configurations language_user = globals().get('language', None) latex_engine_user = globals().get('latex_engine', None) latex_elements_user = globals().get('latex_elements', None) # Remove this once xindy gets installed in Docker image and XINDYOPS # env variable is supported # https://github.com/rtfd/readthedocs-docker-images/pull/98 latex_use_xindy = False chinese = any([ language_user in ('zh_CN', 'zh_TW'), project_language in ('zh_CN', 'zh_TW'), ]) japanese = any([ language_user == 'ja', project_language == 'ja', ]) if chinese: latex_engine = latex_engine_user or 'xelatex' latex_elements_rtd = { 'preamble': '\\usepackage[UTF8]{ctex}\n', } latex_elements = latex_elements_user or latex_elements_rtd elif japanese: latex_engine = latex_engine_user or 'platex' # Make sure our build directory is always excluded exclude_patterns = globals().get('exclude_patterns', []) exclude_patterns.extend(['_build']) [rtd-command-info] start-time: 2021-02-18T22:54:09.244612Z, end-time: 2021-02-18T22:54:12.260942Z, duration: 3, exit-code: 0 python -m sphinx -T -E -b readthedocs -d _build/doctrees-readthedocs -D language=en . _build/html Running Sphinx v3.5.1 loading translations [en]... done making output directory... done building [mo]: targets for 0 po files that are out of date building [readthedocs]: targets for 28 source files that are out of date updating environment: [new config] 28 added, 0 changed, 0 removed reading sources... [ 3%] cs-1-tf-user-guide/adapting-to-cs-1/cerebrasestimator reading sources... [ 7%] cs-1-tf-user-guide/adapting-to-cs-1/example-walk-through-cs-estimator reading sources... [ 10%] cs-1-tf-user-guide/adapting-to-cs-1/index reading sources... [ 14%] cs-1-tf-user-guide/adapting-to-cs-1/restrictions-of-cerebrasestimator reading sources... [ 17%] cs-1-tf-user-guide/preparing-input-pipeline/index reading sources... [ 21%] cs-1-tf-user-guide/preparing-input-pipeline/input-function-analyzer reading sources... [ 25%] cs-1-tf-user-guide/preparing-input-pipeline/multi-worker-input-pipeline reading sources... [ 28%] cs-1-tf-user-guide/preparing-input-pipeline/sharding-for-cs-1 reading sources... [ 32%] cs-1-tf-user-guide/running-a-model/cs-1-execution-flow reading sources... [ 35%] cs-1-tf-user-guide/running-a-model/index reading sources... [ 39%] cs-1-tf-user-guide/running-a-model/on-cpu-gpu reading sources... [ 42%] cs-1-tf-user-guide/running-a-model/precompilation-on-cpu reading sources... [ 46%] cs-1-tf-user-guide/running-a-model/training-on-cs-1-with-slurm reading sources... [ 50%] cs-1-tf-user-guide/tuning-tf-for-cs-1/best-practices-tf reading sources... [ 53%] cs-1-tf-user-guide/tuning-tf-for-cs-1/using-tensorboard reading sources... [ 57%] general-guides/cs-1-data-formats reading sources... [ 60%] general-guides/dynamic-loss-scaling reading sources... [ 64%] general-guides/troubleshooting/faqs reading sources... [ 67%] general-guides/troubleshooting/index reading sources... [ 71%] general-guides/troubleshooting/interpreting-error-messages reading sources... [ 75%] getting-started/how-it-works reading sources... [ 78%] index reading sources... [ 82%] quickstart/cs-1-quickstart reading sources... [ 85%] release-notes/doc-updates reading sources... [ 89%] release-notes/rel-notes-cumulative reading sources... [ 92%] tutorials/tut-bert reading sources... [ 96%] tutorials/tut-fc-mnist reading sources... [100%] tutorials/tut-molecular-graph looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done writing output... [ 3%] cs-1-tf-user-guide/adapting-to-cs-1/cerebrasestimator writing output... [ 7%] cs-1-tf-user-guide/adapting-to-cs-1/example-walk-through-cs-estimator writing output... [ 10%] cs-1-tf-user-guide/adapting-to-cs-1/index writing output... [ 14%] cs-1-tf-user-guide/adapting-to-cs-1/restrictions-of-cerebrasestimator writing output... [ 17%] cs-1-tf-user-guide/preparing-input-pipeline/index writing output... [ 21%] cs-1-tf-user-guide/preparing-input-pipeline/input-function-analyzer writing output... [ 25%] cs-1-tf-user-guide/preparing-input-pipeline/multi-worker-input-pipeline writing output... [ 28%] cs-1-tf-user-guide/preparing-input-pipeline/sharding-for-cs-1 writing output... [ 32%] cs-1-tf-user-guide/running-a-model/cs-1-execution-flow writing output... [ 35%] cs-1-tf-user-guide/running-a-model/index writing output... [ 39%] cs-1-tf-user-guide/running-a-model/on-cpu-gpu writing output... [ 42%] cs-1-tf-user-guide/running-a-model/precompilation-on-cpu writing output... [ 46%] cs-1-tf-user-guide/running-a-model/training-on-cs-1-with-slurm writing output... [ 50%] cs-1-tf-user-guide/tuning-tf-for-cs-1/best-practices-tf writing output... [ 53%] cs-1-tf-user-guide/tuning-tf-for-cs-1/using-tensorboard writing output... [ 57%] general-guides/cs-1-data-formats writing output... [ 60%] general-guides/dynamic-loss-scaling writing output... [ 64%] general-guides/troubleshooting/faqs writing output... [ 67%] general-guides/troubleshooting/index writing output... [ 71%] general-guides/troubleshooting/interpreting-error-messages writing output... [ 75%] getting-started/how-it-works writing output... [ 78%] index writing output... [ 82%] quickstart/cs-1-quickstart writing output... [ 85%] release-notes/doc-updates writing output... [ 89%] release-notes/rel-notes-cumulative writing output... [ 92%] tutorials/tut-bert writing output... [ 96%] tutorials/tut-fc-mnist writing output... [100%] tutorials/tut-molecular-graph generating indices... genindex done writing additional pages... search done copying images... [ 25%] images/sharding-cs-1-example.png copying images... [ 50%] images/cs1-exec-train-only.png copying images... [ 75%] images/cs1-input-data-compiler-model.png copying images... [100%] images/cs-1-gpu-multi-worker.png copying static files... done copying extra files... done dumping search index in English (code: en)... done dumping object inventory... done build succeeded. The HTML pages are in _build/html. Updating searchtools for Read the Docs search... [rtd-command-info] start-time: 2021-02-18T22:54:12.392707Z, end-time: 2021-02-18T22:54:14.243351Z, duration: 1, exit-code: 0 python -m sphinx -T -b readthedocssinglehtmllocalmedia -d _build/doctrees-readthedocssinglehtmllocalmedia -D language=en . _build/localmedia Running Sphinx v3.5.1 loading translations [en]... done making output directory... done building [mo]: targets for 0 po files that are out of date building [readthedocssinglehtmllocalmedia]: all documents updating environment: [new config] 28 added, 0 changed, 0 removed reading sources... [ 3%] cs-1-tf-user-guide/adapting-to-cs-1/cerebrasestimator reading sources... [ 7%] cs-1-tf-user-guide/adapting-to-cs-1/example-walk-through-cs-estimator reading sources... [ 10%] cs-1-tf-user-guide/adapting-to-cs-1/index reading sources... [ 14%] cs-1-tf-user-guide/adapting-to-cs-1/restrictions-of-cerebrasestimator reading sources... [ 17%] cs-1-tf-user-guide/preparing-input-pipeline/index reading sources... [ 21%] cs-1-tf-user-guide/preparing-input-pipeline/input-function-analyzer reading sources... [ 25%] cs-1-tf-user-guide/preparing-input-pipeline/multi-worker-input-pipeline reading sources... [ 28%] cs-1-tf-user-guide/preparing-input-pipeline/sharding-for-cs-1 reading sources... [ 32%] cs-1-tf-user-guide/running-a-model/cs-1-execution-flow reading sources... [ 35%] cs-1-tf-user-guide/running-a-model/index reading sources... [ 39%] cs-1-tf-user-guide/running-a-model/on-cpu-gpu reading sources... [ 42%] cs-1-tf-user-guide/running-a-model/precompilation-on-cpu reading sources... [ 46%] cs-1-tf-user-guide/running-a-model/training-on-cs-1-with-slurm reading sources... [ 50%] cs-1-tf-user-guide/tuning-tf-for-cs-1/best-practices-tf reading sources... [ 53%] cs-1-tf-user-guide/tuning-tf-for-cs-1/using-tensorboard reading sources... [ 57%] general-guides/cs-1-data-formats reading sources... [ 60%] general-guides/dynamic-loss-scaling reading sources... [ 64%] general-guides/troubleshooting/faqs reading sources... [ 67%] general-guides/troubleshooting/index reading sources... [ 71%] general-guides/troubleshooting/interpreting-error-messages reading sources... [ 75%] getting-started/how-it-works reading sources... [ 78%] index reading sources... [ 82%] quickstart/cs-1-quickstart reading sources... [ 85%] release-notes/doc-updates reading sources... [ 89%] release-notes/rel-notes-cumulative reading sources... [ 92%] tutorials/tut-bert reading sources... [ 96%] tutorials/tut-fc-mnist reading sources... [100%] tutorials/tut-molecular-graph looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done assembling single document... release-notes/rel-notes-cumulative release-notes/doc-updates quickstart/cs-1-quickstart getting-started/how-it-works cs-1-tf-user-guide/running-a-model/cs-1-execution-flow tutorials/tut-fc-mnist tutorials/tut-bert tutorials/tut-molecular-graph cs-1-tf-user-guide/adapting-to-cs-1/index cs-1-tf-user-guide/adapting-to-cs-1/cerebrasestimator cs-1-tf-user-guide/adapting-to-cs-1/restrictions-of-cerebrasestimator cs-1-tf-user-guide/adapting-to-cs-1/example-walk-through-cs-estimator cs-1-tf-user-guide/preparing-input-pipeline/index cs-1-tf-user-guide/preparing-input-pipeline/multi-worker-input-pipeline cs-1-tf-user-guide/preparing-input-pipeline/sharding-for-cs-1 cs-1-tf-user-guide/preparing-input-pipeline/input-function-analyzer cs-1-tf-user-guide/running-a-model/index cs-1-tf-user-guide/running-a-model/training-on-cs-1-with-slurm cs-1-tf-user-guide/running-a-model/precompilation-on-cpu cs-1-tf-user-guide/running-a-model/on-cpu-gpu cs-1-tf-user-guide/tuning-tf-for-cs-1/using-tensorboard cs-1-tf-user-guide/tuning-tf-for-cs-1/best-practices-tf general-guides/cs-1-data-formats general-guides/dynamic-loss-scaling general-guides/troubleshooting/index general-guides/troubleshooting/interpreting-error-messages general-guides/troubleshooting/faqs done writing... done writing additional files... done copying images... [ 25%] images/cs1-input-data-compiler-model.png copying images... [ 50%] images/cs-1-gpu-multi-worker.png copying images... [ 75%] images/cs1-exec-train-only.png copying images... [100%] images/sharding-cs-1-example.png copying static files... done copying extra files... done dumping object inventory... done build succeeded. The HTML page is in _build/localmedia. Updating searchtools for Read the Docs search... [rtd-command-info] start-time: 2021-02-18T22:54:14.381307Z, end-time: 2021-02-18T22:54:16.002245Z, duration: 1, exit-code: 0 python -m sphinx -b latex -D language=en -d _build/doctrees . _build/latex Running Sphinx v3.5.1 loading translations [en]... done making output directory... done building [mo]: targets for 0 po files that are out of date building [latex]: all documents updating environment: [new config] 28 added, 0 changed, 0 removed reading sources... [ 3%] cs-1-tf-user-guide/adapting-to-cs-1/cerebrasestimator reading sources... [ 7%] cs-1-tf-user-guide/adapting-to-cs-1/example-walk-through-cs-estimator reading sources... [ 10%] cs-1-tf-user-guide/adapting-to-cs-1/index reading sources... [ 14%] cs-1-tf-user-guide/adapting-to-cs-1/restrictions-of-cerebrasestimator reading sources... [ 17%] cs-1-tf-user-guide/preparing-input-pipeline/index reading sources... [ 21%] cs-1-tf-user-guide/preparing-input-pipeline/input-function-analyzer reading sources... [ 25%] cs-1-tf-user-guide/preparing-input-pipeline/multi-worker-input-pipeline reading sources... [ 28%] cs-1-tf-user-guide/preparing-input-pipeline/sharding-for-cs-1 reading sources... [ 32%] cs-1-tf-user-guide/running-a-model/cs-1-execution-flow reading sources... [ 35%] cs-1-tf-user-guide/running-a-model/index reading sources... [ 39%] cs-1-tf-user-guide/running-a-model/on-cpu-gpu reading sources... [ 42%] cs-1-tf-user-guide/running-a-model/precompilation-on-cpu reading sources... [ 46%] cs-1-tf-user-guide/running-a-model/training-on-cs-1-with-slurm reading sources... [ 50%] cs-1-tf-user-guide/tuning-tf-for-cs-1/best-practices-tf reading sources... [ 53%] cs-1-tf-user-guide/tuning-tf-for-cs-1/using-tensorboard reading sources... [ 57%] general-guides/cs-1-data-formats reading sources... [ 60%] general-guides/dynamic-loss-scaling reading sources... [ 64%] general-guides/troubleshooting/faqs reading sources... [ 67%] general-guides/troubleshooting/index reading sources... [ 71%] general-guides/troubleshooting/interpreting-error-messages reading sources... [ 75%] getting-started/how-it-works reading sources... [ 78%] index reading sources... [ 82%] quickstart/cs-1-quickstart reading sources... [ 85%] release-notes/doc-updates reading sources... [ 89%] release-notes/rel-notes-cumulative reading sources... [ 92%] tutorials/tut-bert reading sources... [ 96%] tutorials/tut-fc-mnist reading sources... [100%] tutorials/tut-molecular-graph looking for now-outdated files... none found pickling environment... done checking consistency... done processing cerebrasdeveloper.tex... index release-notes/rel-notes-cumulative release-notes/doc-updates quickstart/cs-1-quickstart getting-started/how-it-works cs-1-tf-user-guide/running-a-model/cs-1-execution-flow tutorials/tut-fc-mnist tutorials/tut-bert tutorials/tut-molecular-graph cs-1-tf-user-guide/adapting-to-cs-1/index cs-1-tf-user-guide/adapting-to-cs-1/cerebrasestimator cs-1-tf-user-guide/adapting-to-cs-1/restrictions-of-cerebrasestimator cs-1-tf-user-guide/adapting-to-cs-1/example-walk-through-cs-estimator cs-1-tf-user-guide/preparing-input-pipeline/index cs-1-tf-user-guide/preparing-input-pipeline/multi-worker-input-pipeline cs-1-tf-user-guide/preparing-input-pipeline/sharding-for-cs-1 cs-1-tf-user-guide/preparing-input-pipeline/input-function-analyzer cs-1-tf-user-guide/running-a-model/index cs-1-tf-user-guide/running-a-model/training-on-cs-1-with-slurm cs-1-tf-user-guide/running-a-model/precompilation-on-cpu cs-1-tf-user-guide/running-a-model/on-cpu-gpu cs-1-tf-user-guide/tuning-tf-for-cs-1/using-tensorboard cs-1-tf-user-guide/tuning-tf-for-cs-1/best-practices-tf general-guides/cs-1-data-formats general-guides/dynamic-loss-scaling general-guides/troubleshooting/index general-guides/troubleshooting/interpreting-error-messages general-guides/troubleshooting/faqs resolving references... done writing... done copying images... [ 25%] images/cs1-input-data-compiler-model.png copying images... [ 50%] images/cs-1-gpu-multi-worker.png copying images... [ 75%] images/cs1-exec-train-only.png copying images... [100%] images/sharding-cs-1-example.png copying TeX support files... copying TeX support files... done build succeeded. The LaTeX files are in _build/latex. Run 'make' in that directory to run these through (pdf)latex (use `make latexpdf' here to do that automatically). WARNING: Missing searchtools: /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/_build/latex/_static/searchtools.js [rtd-command-info] start-time: 2021-02-18T22:54:16.634533Z, end-time: 2021-02-18T22:54:16.688574Z, duration: 0, exit-code: 0 cat latexmkrc $latex = 'latex ' . $ENV{'LATEXOPTS'} . ' %O %S'; $pdflatex = 'pdflatex ' . $ENV{'LATEXOPTS'} . ' %O %S'; $lualatex = 'lualatex ' . $ENV{'LATEXOPTS'} . ' %O %S'; $xelatex = 'xelatex --no-pdf ' . $ENV{'LATEXOPTS'} . ' %O %S'; $makeindex = 'makeindex -s python.ist %O -o %D %S'; add_cus_dep( "glo", "gls", 0, "makeglo" ); sub makeglo { return system( "makeindex -s gglo.ist -o '$_[0].gls' '$_[0].glo'" ); } [rtd-command-info] start-time: 2021-02-18T22:54:16.813347Z, end-time: 2021-02-18T22:54:21.998635Z, duration: 5, exit-code: 0 latexmk -r latexmkrc -pdf -f -dvi- -ps- -jobname=cerebras-systems-cerebras-systems-developer-documentation -interaction=nonstopmode Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 1, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 2, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 3, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 4, chunk 1. Subroutine makeglo redefined at (eval 11) line 7, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 1, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 2, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 3, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 4, chunk 1. Latexmk: This is Latexmk, John Collins, 1 January 2015, version: 4.41. File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at /usr/bin/latexmk line 7482. Rule 'pdflatex': Rules & subrules not known to be previously run: pdflatex Rule 'pdflatex': The following rules & subrules became out-of-date: 'pdflatex' ------------ Run number 1 of rule 'pdflatex' ------------ ------------ Running 'pdflatex -interaction=nonstopmode -recorder --jobname="cerebras-systems-cerebras-systems-developer-documentation" "cerebrasdeveloper.tex"' ------------ Latexmk: applying rule 'pdflatex'... This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (./cerebrasdeveloper.tex LaTeX2e <2017-04-15> Babel <3.18> and hyphenation patterns for 84 language(s) loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2019/12/01 v2.3.0 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty)) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def) (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def (/usr/share/texlive/texmf-dist/tex/generic/babel/txtbabel.def)))) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/times.sty) (/usr/share/texlive/texmf-dist/tex/latex/fncychap/fncychap.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def))) (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty) (/usr/share/texlive/texmf-dist/tex/latex/tabulary/tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (/usr/share/texlive/texmf-dist/tex/latex/varwidth/varwidth.sty) (./sphinxmulticell.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty) (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty) (/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg)) (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz)) (./footnotehyper-sphinx.sty) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty) (/usr/share/texlive/texmf-dist/tex/latex/carlisle/remreset.sty) (/usr/share/texlive/texmf-dist/tex/latex/tools/multicol.sty) (./sphinxhighlight.sty) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty))))) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/puenc.def) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) (./sphinxmessages.sty) Writing index file cerebras-systems-cerebras-systems-developer-documentation.id x (./cerebras-systems-cerebras-systems-developer-documentation.aux) (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) *geometry* driver: auto-detecting *geometry* detected driver: pdftex (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1phv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] [1] [2] [1] [2] Chapter 1. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1ptm.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd) [3] [4] Chapter 2. [5] [6] Chapter 3. ! Package inputenc Error: Unicode char ​ (U+200B) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.203 ...{\sphinxupquote{​support@cerebras.net}} with \sphinxcode{\sphinxu... [7] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/running-a-model/training-on- cs-1-with-slurm:train-on-cs-1-with-slurm' on page 8 undefined on input line 307 . Underfull \hbox (badness 10000) in paragraph at lines 310--312 []\T1/pcr/m/n/10 NUM_WORKER_NODES=1 srun_train python run.py --mode train Overfull \vbox (5.68167pt too high) detected at line 359 [8] [9] ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} [10] Chapter 4. LaTeX Warning: Hyper reference `getting-started/how-it-works:cs1-support-cluste r' on page 11 undefined on input line 535. [11 <./cs1-input-data-compiler-model.png>] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/running-a-model/on-cpu-gpu:r unning-on-cpu-gpu' on page 12 undefined on input line 625. [12] [13 <./cs-1-gpu-multi-worker.png>] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/running-a-model/training-on- cs-1-with-slurm:train-on-cs-1-with-slurm' on page 14 undefined on input line 72 1. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/running-a-model/on-cpu-gpu:r unning-on-cpu-gpu' on page 14 undefined on input line 724. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/running-a-model/cs-1-executi on-flow:cs-1-execution-flow' on page 14 undefined on input line 731. [14] Chapter 5. LaTeX Warning: Hyper reference `getting-started/how-it-works:how-it-works' on p age 15 undefined on input line 738. [15 <./cs1-exec-train-only.png>] [16] LaTeX Warning: Hyper reference `tutorials/tut-fc-mnist:tut-fc-mnist' on page 17 undefined on input line 894. [17] [18] Chapter 6. [19] [20] Chapter 7. [21] [22] Chapter 8. [23] [24] Chapter 9. [25] [26] [27] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1pcr.fd) [28] [29] Underfull \hbox (badness 10000) in paragraph at lines 1410--1412 []\T1/pcr/m/n/10 [Unsupported TensorFlow] Detected unsupported eval_metric_ops in CS-1 Underfull \hbox (badness 10000) in paragraph at lines 1437--1439 []\T1/pcr/m/n/10 dataset = dataset.shuffle(1000).repeat().batch(batch_size, [30] Underfull \hbox (badness 10000) in paragraph at lines 1494--1496 []\T1/pcr/m/n/10 dataset = dataset.shuffle(1000).repeat().batch(batch_size, Underfull \hbox (badness 10000) in paragraph at lines 1504--1506 []\T1/pcr/m/n/10 [Unsupported TensorFlow] Inconsistent batch sizes detected. To ensure Underfull \hbox (badness 10000) in paragraph at lines 1504--1506 \T1/pcr/m/n/10 a fixed batch size across all steps, set \TS1/pcr/m/n/10 `\T1/pc r/m/n/10 drop_remainder=True\TS1/pcr/m/n/10 ` \T1/pcr/m/n/10 when [31] Overfull \vbox (1.39766pt too high) detected at line 1614 [32] [33] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/adapting-to-cs-1/restriction s-of-cerebrasestimator:cs-estimator-input-function' on page 34 undefined on inp ut line 1671. Overfull \vbox (1.43936pt too high) detected at line 1734 [34] [35] [36] [37] [38] Chapter 10. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/preparing-input-pipeline/mul ti-worker-input-pipeline:configuring-multi-worker-input-pipeline' on page 39 un defined on input line 1919. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/preparing-input-pipeline/sha rding-for-cs-1:sharding-for-cs-1' on page 39 undefined on input line 1928. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/tuning-tf-for-cs-1/best-prac tices-tf:best-practice-sharding' on page 39 undefined on input line 1928. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/tuning-tf-for-cs-1/best-prac tices-tf:best-practices-tf' on page 39 undefined on input line 1928. [39] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/running-a-model/training-on- cs-1-with-slurm:train-on-cs-1-with-slurm' on page 40 undefined on input line 19 37. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/adapting-to-cs-1/cerebrasest imator:cs-est-config' on page 40 undefined on input line 1940. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/tuning-tf-for-cs-1/best-prac tices-tf:best-practice-shuffling' on page 40 undefined on input line 2001. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/tuning-tf-for-cs-1/best-prac tices-tf:best-practices-tf' on page 40 undefined on input line 2001. [40] [41] Underfull \hbox (badness 10000) in paragraph at lines 2179--2181 []\T1/pcr/m/n/10 dataset.map(time_consuming_mapping).cache().shuffle(shuffle_bu ffer). [42] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/preparing-input-pipeline/mul ti-worker-input-pipeline:multi-worker-input-pipeline' on page 43 undefined on i nput line 2229. [43] [44] [45 <./sharding-cs-1-example.png>] [46] Underfull \hbox (badness 6842) in paragraph at lines 2596--2596 []\T1/phv/m/n/10 Rec-om-mended Cere- Underfull \hbox (badness 10000) in paragraph at lines 2596--2596 []\T1/pcr/m/n/10 split_utils.py \T1/ptm/m/n/10 and Underfull \hbox (badness 10000) in paragraph at lines 2596--2596 []\T1/ptm/m/n/10 Text (com-pressed files with [47] [48] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/adapting-to-cs-1/restriction s-of-cerebrasestimator:restrictions-of-cerebras-estimator' on page 49 undefined on input line 2738. Overfull \hbox (0.56348pt too wide) in paragraph at lines 2870--2870 []\T1/phv/m/n/10 An- Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/phv/m/n/10 a- Overfull \hbox (5.96362pt too wide) in paragraph at lines 2870--2870 \T1/phv/m/n/10 lyzer Overfull \hbox (13.14355pt too wide) in paragraph at lines 2870--2870 \T1/phv/m/n/10 Check Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/phv/m/n/10 in Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/phv/m/n/10 in- Overfull \hbox (12.80319pt too wide) in paragraph at lines 2870--2870 \T1/phv/m/n/10 put_fn| Overfull \hbox (51.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 buffer_size| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 The value found for Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 buffer_size \T1/ptm/m/n/10 ar-gu-ment. Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/ptm/m/n/10 See \T1/pcr/m/n/10 TFRecordDataset\T1/ptm/m/n/10 , Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 TextLineDataset \T1/ptm/m/n/10 and Overfull \hbox (19.37885pt too wide) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 FixedLengthRecordDatasetV2 Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/ptm/m/n/10 the \T1/pcr/m/n/10 dataset.prefetch()\T1/ptm/m/n/10 . Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 For \T1/pcr/m/n/10 dataset.prefetch() \T1/ptm/m/n/10 if not se t to \T1/pcr/m/n/10 tf.data. Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 experimental.AUTOTUNE\T1/ptm/m/n/10 , then rec-om-mends the Overfull \hbox (93.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 num_parallel_calls| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 Checks if Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 num_parallel_calls \T1/ptm/m/n/10 is Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 AUTOTUNE\T1/ptm/m/n/10 . If set to some-thing other than \T1/pcr /m/n/10 tf. Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 data.experimental.AUTOTUNE\T1/ptm/m/n/10 , then sug-gests set- Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/ptm/m/n/10 ting to \T1/pcr/m/n/10 tf.data.experimental.AUTOTUNE\T1/ptm/m/n/ 10 , as: Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 dataset = dataset.interleave(map_func, Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 num_parallel_calls=tf.data.experimental. Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 num_parallel_calls=tf.data.experimental. Overfull \hbox (9.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 size| Overfull \hbox (69.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 drop_remainder| Overfull \hbox (45.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 flat_map()| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 Checks if the method Overfull \hbox (15.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 count| Overfull \hbox (9.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 seed| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/ptm/m/n/10 must be set to \T1/pcr/m/n/10 None\T1/ptm/m/n/10 , as in: \T1/pc r/m/n/10 dataset = dataset. Overfull \hbox (45.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 batch_size| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 Dis-plays the value of Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 batch_size \T1/ptm/m/n/10 pa-ram-e-ter in Overfull \hbox (33.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 repeat()| Overfull \hbox (27.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 batch()| Overfull \hbox (45.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 prefetch()| [49] Overfull \vbox (345.76988pt too high) has occurred while \output is active [50] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/adapting-to-cs-1/restriction s-of-cerebrasestimator:restrictions-of-cerebras-estimator' on page 51 undefined on input line 2895. [51] [52] Chapter 11. [53] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/adapting-to-cs-1/cerebrasest imator:cs-est-config' on page 54 undefined on input line 3040. [54] [55] [56] Underfull \hbox (badness 10000) in paragraph at lines 3206--3208 []\T1/pcr/m/n/10 est = CerebrasEstimator(model_fn, params, config=config, model _dir=". [57] [58] Chapter 12. [59] [60] Chapter 13. [61] [62] Chapter 14. LaTeX Warning: Hyper reference `general-guides/dynamic-loss-scaling:dynamic-los s-scaling' on page 63 undefined on input line 3445. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/adapting-to-cs-1/example-wal k-through-cs-estimator:walkthrough-mixed-precision' on page 63 undefined on inp ut line 3448. [63] [64] Chapter 15. LaTeX Warning: Hyper reference `general-guides/cs-1-data-formats:data-formats' on page 65 undefined on input line 3558. [65] [66] Chapter 16. [67] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/preparing-input-pipeline/inp ut-function-analyzer:input-function-analyzer' on page 68 undefined on input lin e 3691. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/adapting-to-cs-1/example-wal k-through-cs-estimator:walkthrough-mixed-precision' on page 68 undefined on inp ut line 3700. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/adapting-to-cs-1/cerebrasest imator:cs-est-config' on page 68 undefined on input line 3718. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/tuning-tf-for-cs-1/using-ten sorboard:using-tensorboard' on page 68 undefined on input line 3731. [68] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/preparing-input-pipeline/mul ti-worker-input-pipeline:optimizing-input-pipeline' on page 69 undefined on inp ut line 3770. [69] [70] Chapter 17. No file cerebras-systems-cerebras-systems-developer-documentation.ind. [71] (./cerebras-systems-cerebras-systems-developer-documentation.aux) Package rerunfilecheck Warning: File `cerebras-systems-cerebras-systems-develop er-documentation.out' has changed. (rerunfilecheck) Rerun to get outlines right (rerunfilecheck) or use package `bookmark'. LaTeX Warning: There were undefined references. LaTeX Warning: Label(s) may have changed. Rerun to get cross-references right. ) (see the transcript file for additional information){/usr/share/texlive/texmf-d ist/fonts/enc/dvips/base/8r.enc}< /usr/share/texlive/texmf-dist/fonts/type1/urw/courier/ucrr8a.pfb>< /usr/share/texlive/texmf-dist/fonts/type1/urw/times/utmri8a.pfb> Output written on cerebras-systems-cerebras-systems-developer-documentation.pdf (75 pages, 805044 bytes). Transcript written on cerebras-systems-cerebras-systems-developer-documentation .log. Latexmk: Index file 'cerebras-systems-cerebras-systems-developer-documentation.id' written ==> but it has an extension I do not know how to handle <== Latexmk: Index file 'cerebras-systems-cerebras-systems-developer-documentation.idx' was written Latexmk: Missing input file: 'cerebras-systems-cerebras-systems-developer-documentation.ind' from line 'No file cerebras-systems-cerebras-systems-developer-documentation.ind.' Latexmk: References changed. Latexmk: References changed. Latexmk: Log file says output to 'cerebras-systems-cerebras-systems-developer-documentation.pdf' Latexmk: applying rule 'makeindex cerebras-systems-cerebras-systems-developer-documentation.idx'... Rule 'makeindex cerebras-systems-cerebras-systems-developer-documentation.idx': File changes, etc: Non-existent destination files: 'cerebras-systems-cerebras-systems-developer-documentation.ind' ------------ Run number 1 of rule 'makeindex cerebras-systems-cerebras-systems-developer-documentation.idx' ------------ ------------ Running 'makeindex -s python.ist -o "cerebras-systems-cerebras-systems-developer-documentation.ind" "cerebras-systems-cerebras-systems-developer-documentation.idx"' ------------ This is makeindex, version 2.15 [TeX Live 2017] (kpathsea + Thai support). Scanning style file ./python.ist.......done (7 attributes redefined, 0 ignored). Scanning input file cerebras-systems-cerebras-systems-developer-documentation.idx...done (0 entries accepted, 0 rejected). Nothing written in cerebras-systems-cerebras-systems-developer-documentation.ind. Transcript written in cerebras-systems-cerebras-systems-developer-documentation.ilg. Rule 'pdflatex': File changes, etc: Changed files, or newly in use since previous run(s): 'cerebras-systems-cerebras-systems-developer-documentation.aux' 'cerebras-systems-cerebras-systems-developer-documentation.ind' ------------ Run number 2 of rule 'pdflatex' ------------ Latexmk: applying rule 'pdflatex'... ------------ Running 'pdflatex -interaction=nonstopmode -recorder --jobname="cerebras-systems-cerebras-systems-developer-documentation" "cerebrasdeveloper.tex"' ------------ This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (./cerebrasdeveloper.tex LaTeX2e <2017-04-15> Babel <3.18> and hyphenation patterns for 84 language(s) loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2019/12/01 v2.3.0 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty)) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def) (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def (/usr/share/texlive/texmf-dist/tex/generic/babel/txtbabel.def)))) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/times.sty) (/usr/share/texlive/texmf-dist/tex/latex/fncychap/fncychap.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def))) (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty) (/usr/share/texlive/texmf-dist/tex/latex/tabulary/tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (/usr/share/texlive/texmf-dist/tex/latex/varwidth/varwidth.sty) (./sphinxmulticell.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty) (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty) (/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg)) (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz)) (./footnotehyper-sphinx.sty) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty) (/usr/share/texlive/texmf-dist/tex/latex/carlisle/remreset.sty) (/usr/share/texlive/texmf-dist/tex/latex/tools/multicol.sty) (./sphinxhighlight.sty) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty))))) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/puenc.def) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) (./sphinxmessages.sty) Writing index file cerebras-systems-cerebras-systems-developer-documentation.id x (./cerebras-systems-cerebras-systems-developer-documentation.aux) (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) *geometry* driver: auto-detecting *geometry* detected driver: pdftex (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) (./cerebras-systems-cerebras-systems-developer-documentation.out) (./cerebras-systems-cerebras-systems-developer-documentation.out) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1phv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] (./cerebras-systems-cerebras-systems-developer-documentation.toc [1] [2]) [3] [4] [1] [2] Chapter 1. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1ptm.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd) [3] [4] Chapter 2. [5] [6] Chapter 3. ! Package inputenc Error: Unicode char ​ (U+200B) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.203 ...{\sphinxupquote{​support@cerebras.net}} with \sphinxcode{\sphinxu... [7] Underfull \hbox (badness 10000) in paragraph at lines 310--312 []\T1/pcr/m/n/10 NUM_WORKER_NODES=1 srun_train python run.py --mode train Overfull \vbox (5.68167pt too high) detected at line 359 [8] [9] ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} [10] Chapter 4. [11 <./cs1-input-data-compiler-model.png>] [12] [13 <./cs-1-gpu-multi-worker.pn g>] [14] Chapter 5. [15 <./cs1-exec-train-only.png>] [16] [17] [18] Chapter 6. [19] [20] Chapter 7. [21] [22] Chapter 8. [23] [24] Chapter 9. [25] [26] [27] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1pcr.fd) [28] [29] Underfull \hbox (badness 10000) in paragraph at lines 1410--1412 []\T1/pcr/m/n/10 [Unsupported TensorFlow] Detected unsupported eval_metric_ops in CS-1 Underfull \hbox (badness 10000) in paragraph at lines 1437--1439 []\T1/pcr/m/n/10 dataset = dataset.shuffle(1000).repeat().batch(batch_size, [30] Underfull \hbox (badness 10000) in paragraph at lines 1494--1496 []\T1/pcr/m/n/10 dataset = dataset.shuffle(1000).repeat().batch(batch_size, Underfull \hbox (badness 10000) in paragraph at lines 1504--1506 []\T1/pcr/m/n/10 [Unsupported TensorFlow] Inconsistent batch sizes detected. To ensure Underfull \hbox (badness 10000) in paragraph at lines 1504--1506 \T1/pcr/m/n/10 a fixed batch size across all steps, set \TS1/pcr/m/n/10 `\T1/pc r/m/n/10 drop_remainder=True\TS1/pcr/m/n/10 ` \T1/pcr/m/n/10 when [31] Overfull \vbox (1.39766pt too high) detected at line 1614 [32] [33] Overfull \vbox (1.43936pt too high) detected at line 1734 [34] [35] [36] [37] [38] Chapter 10. [39] [40] [41] Underfull \hbox (badness 10000) in paragraph at lines 2179--2181 []\T1/pcr/m/n/10 dataset.map(time_consuming_mapping).cache().shuffle(shuffle_bu ffer). [42] [43] [44] [45 <./sharding-cs-1-example.png>] [46] Underfull \hbox (badness 6842) in paragraph at lines 2596--2596 []\T1/phv/m/n/10 Rec-om-mended Cere- Underfull \hbox (badness 10000) in paragraph at lines 2596--2596 []\T1/pcr/m/n/10 split_utils.py \T1/ptm/m/n/10 and Underfull \hbox (badness 10000) in paragraph at lines 2596--2596 []\T1/ptm/m/n/10 Text (com-pressed files with [47] [48] Overfull \hbox (0.56348pt too wide) in paragraph at lines 2870--2870 []\T1/phv/m/n/10 An- Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/phv/m/n/10 a- Overfull \hbox (5.96362pt too wide) in paragraph at lines 2870--2870 \T1/phv/m/n/10 lyzer Overfull \hbox (13.14355pt too wide) in paragraph at lines 2870--2870 \T1/phv/m/n/10 Check Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/phv/m/n/10 in Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/phv/m/n/10 in- Overfull \hbox (12.80319pt too wide) in paragraph at lines 2870--2870 \T1/phv/m/n/10 put_fn| Overfull \hbox (51.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 buffer_size| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 The value found for Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 buffer_size \T1/ptm/m/n/10 ar-gu-ment. Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/ptm/m/n/10 See \T1/pcr/m/n/10 TFRecordDataset\T1/ptm/m/n/10 , Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 TextLineDataset \T1/ptm/m/n/10 and Overfull \hbox (19.37885pt too wide) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 FixedLengthRecordDatasetV2 Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/ptm/m/n/10 the \T1/pcr/m/n/10 dataset.prefetch()\T1/ptm/m/n/10 . Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 For \T1/pcr/m/n/10 dataset.prefetch() \T1/ptm/m/n/10 if not se t to \T1/pcr/m/n/10 tf.data. Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 experimental.AUTOTUNE\T1/ptm/m/n/10 , then rec-om-mends the Overfull \hbox (93.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 num_parallel_calls| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 Checks if Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 num_parallel_calls \T1/ptm/m/n/10 is Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 AUTOTUNE\T1/ptm/m/n/10 . If set to some-thing other than \T1/pcr /m/n/10 tf. Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 data.experimental.AUTOTUNE\T1/ptm/m/n/10 , then sug-gests set- Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/ptm/m/n/10 ting to \T1/pcr/m/n/10 tf.data.experimental.AUTOTUNE\T1/ptm/m/n/ 10 , as: Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 dataset = dataset.interleave(map_func, Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 num_parallel_calls=tf.data.experimental. Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 num_parallel_calls=tf.data.experimental. Overfull \hbox (9.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 size| Overfull \hbox (69.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 drop_remainder| Overfull \hbox (45.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 flat_map()| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 Checks if the method Overfull \hbox (15.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 count| Overfull \hbox (9.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 seed| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/ptm/m/n/10 must be set to \T1/pcr/m/n/10 None\T1/ptm/m/n/10 , as in: \T1/pc r/m/n/10 dataset = dataset. Overfull \hbox (45.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 batch_size| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 Dis-plays the value of Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 batch_size \T1/ptm/m/n/10 pa-ram-e-ter in Overfull \hbox (33.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 repeat()| Overfull \hbox (27.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 batch()| Overfull \hbox (45.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 prefetch()| [49] Overfull \vbox (345.76988pt too high) has occurred while \output is active [50] [51] [52] Chapter 11. [53] [54] [55] [56] Underfull \hbox (badness 10000) in paragraph at lines 3206--3208 []\T1/pcr/m/n/10 est = CerebrasEstimator(model_fn, params, config=config, model _dir=". [57] [58] Chapter 12. [59] [60] Chapter 13. [61] [62] Chapter 14. [63] [64] Chapter 15. [65] [66] Chapter 16. [67] [68] [69] [70] Chapter 17. (./cerebras-systems-cerebras-systems-developer-documentation.ind) [71] (./cerebras-systems-cerebras-systems-developer-documentation.aux) ) (see the transcript file for additional information){/usr/share/texlive/texmf-d ist/fonts/enc/dvips/base/8r.enc}< /usr/share/texlive/texmf-dist/fonts/type1/urw/courier/ucrr8a.pfb>< /usr/share/texlive/texmf-dist/fonts/type1/urw/times/utmri8a.pfb> Output written on cerebras-systems-cerebras-systems-developer-documentation.pdf (77 pages, 823014 bytes). Transcript written on cerebras-systems-cerebras-systems-developer-documentation .log. Latexmk: Index file 'cerebras-systems-cerebras-systems-developer-documentation.id' written ==> but it has an extension I do not know how to handle <== Latexmk: Index file 'cerebras-systems-cerebras-systems-developer-documentation.idx' was written Latexmk: Log file says output to 'cerebras-systems-cerebras-systems-developer-documentation.pdf' Rule 'pdflatex': File changes, etc: Changed files, or newly in use since previous run(s): 'cerebras-systems-cerebras-systems-developer-documentation.out' 'cerebras-systems-cerebras-systems-developer-documentation.toc' ------------ Run number 3 of rule 'pdflatex' ------------ ------------ Running 'pdflatex -interaction=nonstopmode -recorder --jobname="cerebras-systems-cerebras-systems-developer-documentation" "cerebrasdeveloper.tex"' ------------ Latexmk: applying rule 'pdflatex'... This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (./cerebrasdeveloper.tex LaTeX2e <2017-04-15> Babel <3.18> and hyphenation patterns for 84 language(s) loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2019/12/01 v2.3.0 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty)) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def) (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def (/usr/share/texlive/texmf-dist/tex/generic/babel/txtbabel.def)))) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/times.sty) (/usr/share/texlive/texmf-dist/tex/latex/fncychap/fncychap.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def))) (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty) (/usr/share/texlive/texmf-dist/tex/latex/tabulary/tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (/usr/share/texlive/texmf-dist/tex/latex/varwidth/varwidth.sty) (./sphinxmulticell.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty) (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty) (/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg)) (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz)) (./footnotehyper-sphinx.sty) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty) (/usr/share/texlive/texmf-dist/tex/latex/carlisle/remreset.sty) (/usr/share/texlive/texmf-dist/tex/latex/tools/multicol.sty) (./sphinxhighlight.sty) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty))))) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/puenc.def) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) (./sphinxmessages.sty) Writing index file cerebras-systems-cerebras-systems-developer-documentation.id x (./cerebras-systems-cerebras-systems-developer-documentation.aux) (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) *geometry* driver: auto-detecting *geometry* detected driver: pdftex (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) (./cerebras-systems-cerebras-systems-developer-documentation.out) (./cerebras-systems-cerebras-systems-developer-documentation.out) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1phv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] (./cerebras-systems-cerebras-systems-developer-documentation.toc [1] [2]) [3] [4] [1] [2] Chapter 1. (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1ptm.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd) [3] [4] Chapter 2. [5] [6] Chapter 3. ! Package inputenc Error: Unicode char ​ (U+200B) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.203 ...{\sphinxupquote{​support@cerebras.net}} with \sphinxcode{\sphinxu... [7] Underfull \hbox (badness 10000) in paragraph at lines 310--312 []\T1/pcr/m/n/10 NUM_WORKER_NODES=1 srun_train python run.py --mode train Overfull \vbox (5.68167pt too high) detected at line 359 [8] [9] ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.468 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} [10] Chapter 4. [11 <./cs1-input-data-compiler-model.png>] [12] [13 <./cs-1-gpu-multi-worker.pn g>] [14] Chapter 5. [15 <./cs1-exec-train-only.png>] [16] [17] [18] Chapter 6. [19] [20] Chapter 7. [21] [22] Chapter 8. [23] [24] Chapter 9. [25] [26] [27] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1pcr.fd) [28] [29] Underfull \hbox (badness 10000) in paragraph at lines 1410--1412 []\T1/pcr/m/n/10 [Unsupported TensorFlow] Detected unsupported eval_metric_ops in CS-1 Underfull \hbox (badness 10000) in paragraph at lines 1437--1439 []\T1/pcr/m/n/10 dataset = dataset.shuffle(1000).repeat().batch(batch_size, [30] Underfull \hbox (badness 10000) in paragraph at lines 1494--1496 []\T1/pcr/m/n/10 dataset = dataset.shuffle(1000).repeat().batch(batch_size, Underfull \hbox (badness 10000) in paragraph at lines 1504--1506 []\T1/pcr/m/n/10 [Unsupported TensorFlow] Inconsistent batch sizes detected. To ensure Underfull \hbox (badness 10000) in paragraph at lines 1504--1506 \T1/pcr/m/n/10 a fixed batch size across all steps, set \TS1/pcr/m/n/10 `\T1/pc r/m/n/10 drop_remainder=True\TS1/pcr/m/n/10 ` \T1/pcr/m/n/10 when [31] Overfull \vbox (1.39766pt too high) detected at line 1614 [32] [33] Overfull \vbox (1.43936pt too high) detected at line 1734 [34] [35] [36] [37] [38] Chapter 10. [39] [40] [41] Underfull \hbox (badness 10000) in paragraph at lines 2179--2181 []\T1/pcr/m/n/10 dataset.map(time_consuming_mapping).cache().shuffle(shuffle_bu ffer). [42] [43] [44] [45 <./sharding-cs-1-example.png>] [46] Underfull \hbox (badness 6842) in paragraph at lines 2596--2596 []\T1/phv/m/n/10 Rec-om-mended Cere- Underfull \hbox (badness 10000) in paragraph at lines 2596--2596 []\T1/pcr/m/n/10 split_utils.py \T1/ptm/m/n/10 and Underfull \hbox (badness 10000) in paragraph at lines 2596--2596 []\T1/ptm/m/n/10 Text (com-pressed files with [47] [48] Overfull \hbox (0.56348pt too wide) in paragraph at lines 2870--2870 []\T1/phv/m/n/10 An- Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/phv/m/n/10 a- Overfull \hbox (5.96362pt too wide) in paragraph at lines 2870--2870 \T1/phv/m/n/10 lyzer Overfull \hbox (13.14355pt too wide) in paragraph at lines 2870--2870 \T1/phv/m/n/10 Check Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/phv/m/n/10 in Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/phv/m/n/10 in- Overfull \hbox (12.80319pt too wide) in paragraph at lines 2870--2870 \T1/phv/m/n/10 put_fn| Overfull \hbox (51.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 buffer_size| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 The value found for Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 buffer_size \T1/ptm/m/n/10 ar-gu-ment. Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/ptm/m/n/10 See \T1/pcr/m/n/10 TFRecordDataset\T1/ptm/m/n/10 , Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 TextLineDataset \T1/ptm/m/n/10 and Overfull \hbox (19.37885pt too wide) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 FixedLengthRecordDatasetV2 Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/ptm/m/n/10 the \T1/pcr/m/n/10 dataset.prefetch()\T1/ptm/m/n/10 . Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 For \T1/pcr/m/n/10 dataset.prefetch() \T1/ptm/m/n/10 if not se t to \T1/pcr/m/n/10 tf.data. Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 experimental.AUTOTUNE\T1/ptm/m/n/10 , then rec-om-mends the Overfull \hbox (93.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 num_parallel_calls| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 Checks if Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 num_parallel_calls \T1/ptm/m/n/10 is Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 AUTOTUNE\T1/ptm/m/n/10 . If set to some-thing other than \T1/pcr /m/n/10 tf. Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 data.experimental.AUTOTUNE\T1/ptm/m/n/10 , then sug-gests set- Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/ptm/m/n/10 ting to \T1/pcr/m/n/10 tf.data.experimental.AUTOTUNE\T1/ptm/m/n/ 10 , as: Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 dataset = dataset.interleave(map_func, Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 num_parallel_calls=tf.data.experimental. Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 num_parallel_calls=tf.data.experimental. Overfull \hbox (9.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 size| Overfull \hbox (69.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 drop_remainder| Overfull \hbox (45.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 flat_map()| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 Checks if the method Overfull \hbox (15.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 count| Overfull \hbox (9.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 seed| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/ptm/m/n/10 must be set to \T1/pcr/m/n/10 None\T1/ptm/m/n/10 , as in: \T1/pc r/m/n/10 dataset = dataset. Overfull \hbox (45.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 batch_size| Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 []\T1/ptm/m/n/10 Dis-plays the value of Underfull \hbox (badness 10000) in paragraph at lines 2870--2870 \T1/pcr/m/n/10 batch_size \T1/ptm/m/n/10 pa-ram-e-ter in Overfull \hbox (33.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 repeat()| Overfull \hbox (27.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 batch()| Overfull \hbox (45.00366pt too wide) in paragraph at lines 2870--2870 []\T1/pcr/m/n/10 prefetch()| [49] Overfull \vbox (345.76988pt too high) has occurred while \output is active [50] [51] [52] Chapter 11. [53] [54] [55] [56] Underfull \hbox (badness 10000) in paragraph at lines 3206--3208 []\T1/pcr/m/n/10 est = CerebrasEstimator(model_fn, params, config=config, model _dir=". [57] [58] Chapter 12. [59] [60] Chapter 13. [61] [62] Chapter 14. [63] [64] Chapter 15. [65] [66] Chapter 16. [67] [68] [69] [70] Chapter 17. (./cerebras-systems-cerebras-systems-developer-documentation.ind) [71] (./cerebras-systems-cerebras-systems-developer-documentation.aux) ) (see the transcript file for additional information){/usr/share/texlive/texmf-d ist/fonts/enc/dvips/base/8r.enc}< /usr/share/texlive/texmf-dist/fonts/type1/urw/courier/ucrr8a.pfb>< /usr/share/texlive/texmf-dist/fonts/type1/urw/times/utmri8a.pfb> Output written on cerebras-systems-cerebras-systems-developer-documentation.pdf (77 pages, 823014 bytes). Transcript written on cerebras-systems-cerebras-systems-developer-documentation .log. Latexmk: Index file 'cerebras-systems-cerebras-systems-developer-documentation.id' written ==> but it has an extension I do not know how to handle <== Latexmk: Index file 'cerebras-systems-cerebras-systems-developer-documentation.idx' was written Latexmk: Log file says output to 'cerebras-systems-cerebras-systems-developer-documentation.pdf' Collected error summary (may duplicate other messages): pdflatex: Command for 'pdflatex' gave return code 256 Latexmk: Errors, in force_mode: so I tried finishing targets [rtd-command-info] start-time: 2021-02-18T22:54:22.173017Z, end-time: 2021-02-18T22:54:22.231390Z, duration: 0, exit-code: 0 mv -f /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/_build/latex/cerebras-systems-cerebras-systems-developer-documentation.pdf /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/artifacts/latest/sphinx_pdf/cerebras-systems-cerebras-systems-developer-documentation.pdf