Read the Docs build information Build id: 533156 Project: cerebras-systems-cerebras-systems-developer-documentation Version: latest Commit: 7c5a034596c5112f7a3c2b1f57cf9e3504630a3e Date: 2021-01-15T23:48:31.419203Z State: finished Success: True [rtd-command-info] start-time: 2021-01-15T23:48:32.841763Z, end-time: 2021-01-15T23:48:36.133964Z, duration: 3, exit-code: 0 git clone --no-single-branch --depth 50 git@github.com:Cerebras/documentation.git . Cloning into '.'... Warning: Permanently added 'github.com,140.82.113.3' (RSA) to the list of known hosts. [rtd-command-info] start-time: 2021-01-15T23:48:36.548201Z, end-time: 2021-01-15T23:48:36.606826Z, duration: 0, exit-code: 0 git checkout --force origin/main Note: checking out 'origin/main'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b HEAD is now at 7c5a034 Merge pull request #63 from Cerebras/rajk/REL-063 [rtd-command-info] start-time: 2021-01-15T23:48:36.717500Z, end-time: 2021-01-15T23:48:36.774044Z, duration: 0, exit-code: 0 git clean -d -f -f [rtd-command-info] start-time: 2021-01-15T23:48:37.874612Z, end-time: 2021-01-15T23:48:41.822344Z, duration: 3, exit-code: 0 python3.7 -mvirtualenv Using base prefix '/home/docs/.pyenv/versions/3.7.9' New python executable in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/bin/python3.7 Also creating executable in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/bin/python Installing setuptools, pip, wheel... done. [rtd-command-info] start-time: 2021-01-15T23:48:41.930374Z, end-time: 2021-01-15T23:48:43.538449Z, duration: 1, exit-code: 0 python -m pip install --upgrade --no-cache-dir pip Requirement already satisfied: pip in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (20.3.3) [rtd-command-info] start-time: 2021-01-15T23:48:43.687993Z, end-time: 2021-01-15T23:48:52.932528Z, duration: 9, exit-code: 0 python -m pip install --upgrade --no-cache-dir setuptools==41.0.1 docutils==0.14 mock==1.0.1 pillow==5.4.1 alabaster>=0.7,<0.8,!=0.7.5 six commonmark==0.8.1 recommonmark==0.5.0 sphinx<2 sphinx-rtd-theme<0.5 readthedocs-sphinx-ext<2.2 Collecting commonmark==0.8.1 Downloading commonmark-0.8.1-py2.py3-none-any.whl (47 kB) Collecting docutils==0.14 Downloading docutils-0.14-py3-none-any.whl (543 kB) Collecting mock==1.0.1 Downloading mock-1.0.1.zip (861 kB) Collecting pillow==5.4.1 Downloading Pillow-5.4.1-cp37-cp37m-manylinux1_x86_64.whl (2.0 MB) Collecting recommonmark==0.5.0 Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB) Collecting alabaster!=0.7.5,<0.8,>=0.7 Downloading alabaster-0.7.12-py2.py3-none-any.whl (14 kB) Collecting readthedocs-sphinx-ext<2.2 Downloading readthedocs_sphinx_ext-2.1.2-py2.py3-none-any.whl (11 kB) Collecting sphinx<2 Downloading Sphinx-1.8.5-py2.py3-none-any.whl (3.1 MB) Collecting six Downloading six-1.15.0-py2.py3-none-any.whl (10 kB) Collecting sphinx-rtd-theme<0.5 Downloading sphinx_rtd_theme-0.4.3-py2.py3-none-any.whl (6.4 MB) Collecting babel!=2.0,>=1.3 Downloading Babel-2.9.0-py2.py3-none-any.whl (8.8 MB) Collecting Jinja2>=2.9 Downloading Jinja2-2.11.2-py2.py3-none-any.whl (125 kB) Collecting MarkupSafe>=0.23 Downloading MarkupSafe-1.1.1-cp37-cp37m-manylinux1_x86_64.whl (27 kB) Collecting Pygments>=2.0 Downloading Pygments-2.7.4-py3-none-any.whl (950 kB) Collecting pytz>=2015.7 Downloading pytz-2020.5-py2.py3-none-any.whl (510 kB) Collecting requests Downloading requests-2.25.1-py2.py3-none-any.whl (61 kB) Collecting certifi>=2017.4.17 Downloading certifi-2020.12.5-py2.py3-none-any.whl (147 kB) Collecting chardet<5,>=3.0.2 Downloading chardet-4.0.0-py2.py3-none-any.whl (178 kB) Collecting idna<3,>=2.5 Downloading idna-2.10-py2.py3-none-any.whl (58 kB) Collecting snowballstemmer>=1.1 Downloading snowballstemmer-2.0.0-py2.py3-none-any.whl (97 kB) Collecting urllib3<1.27,>=1.21.1 Downloading urllib3-1.26.2-py2.py3-none-any.whl (136 kB) Collecting future Downloading future-0.18.2.tar.gz (829 kB) Collecting imagesize Downloading imagesize-1.2.0-py2.py3-none-any.whl (4.8 kB) Collecting packaging Downloading packaging-20.8-py2.py3-none-any.whl (39 kB) Collecting pyparsing>=2.0.2 Downloading pyparsing-2.4.7-py2.py3-none-any.whl (67 kB) Collecting sphinxcontrib-websupport Downloading sphinxcontrib_websupport-1.2.4-py2.py3-none-any.whl (39 kB) Collecting sphinxcontrib-serializinghtml Downloading sphinxcontrib_serializinghtml-1.1.4-py2.py3-none-any.whl (89 kB) Collecting setuptools==41.0.1 Downloading setuptools-41.0.1-py2.py3-none-any.whl (575 kB) Building wheels for collected packages: mock, future Building wheel for mock (setup.py): started Building wheel for mock (setup.py): finished with status 'done' Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23755 sha256=099a2e957ee9264bfd7dadb3200fdbbe0a40e83ca4d0527e46e6b08a6a8feb09 Stored in directory: /tmp/pip-ephem-wheel-cache-b0vkxv64/wheels/7a/94/b1/0fdc5339a5bd487a5cc15421ec200d9ba3e2aa7190e4a727f1 Building wheel for future (setup.py): started Building wheel for future (setup.py): finished with status 'done' Created wheel for future: filename=future-0.18.2-py3-none-any.whl size=491059 sha256=b5f83018824555c091d0fdadf9f8914506e5395beb6f5fded3a37c9a2d2d63db Stored in directory: /tmp/pip-ephem-wheel-cache-b0vkxv64/wheels/56/b0/fe/4410d17b32f1f0c3cf54cdfb2bc04d7b4b8f4ae377e2229ba0 Successfully built mock future Installing collected packages: urllib3, sphinxcontrib-serializinghtml, pytz, pyparsing, MarkupSafe, idna, chardet, certifi, sphinxcontrib-websupport, snowballstemmer, six, setuptools, requests, Pygments, packaging, Jinja2, imagesize, future, docutils, babel, alabaster, sphinx, commonmark, sphinx-rtd-theme, recommonmark, readthedocs-sphinx-ext, pillow, mock Attempting uninstall: setuptools Found existing installation: setuptools 51.1.2 Uninstalling setuptools-51.1.2: Successfully uninstalled setuptools-51.1.2 Successfully installed Jinja2-2.11.2 MarkupSafe-1.1.1 Pygments-2.7.4 alabaster-0.7.12 babel-2.9.0 certifi-2020.12.5 chardet-4.0.0 commonmark-0.8.1 docutils-0.14 future-0.18.2 idna-2.10 imagesize-1.2.0 mock-1.0.1 packaging-20.8 pillow-5.4.1 pyparsing-2.4.7 pytz-2020.5 readthedocs-sphinx-ext-2.1.2 recommonmark-0.5.0 requests-2.25.1 setuptools-41.0.1 six-1.15.0 snowballstemmer-2.0.0 sphinx-1.8.5 sphinx-rtd-theme-0.4.3 sphinxcontrib-serializinghtml-1.1.4 sphinxcontrib-websupport-1.2.4 urllib3-1.26.2 [rtd-command-info] start-time: 2021-01-15T23:48:43.687993Z, end-time: 2021-01-15T23:48:52.932528Z, duration: 9, exit-code: 0 python -m pip install --upgrade --no-cache-dir setuptools==41.0.1 docutils==0.14 mock==1.0.1 pillow==5.4.1 alabaster>=0.7,<0.8,!=0.7.5 six commonmark==0.8.1 recommonmark==0.5.0 sphinx<2 sphinx-rtd-theme<0.5 readthedocs-sphinx-ext<2.2 Collecting commonmark==0.8.1 Downloading commonmark-0.8.1-py2.py3-none-any.whl (47 kB) Collecting docutils==0.14 Downloading docutils-0.14-py3-none-any.whl (543 kB) Collecting mock==1.0.1 Downloading mock-1.0.1.zip (861 kB) Collecting pillow==5.4.1 Downloading Pillow-5.4.1-cp37-cp37m-manylinux1_x86_64.whl (2.0 MB) Collecting recommonmark==0.5.0 Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB) Collecting alabaster!=0.7.5,<0.8,>=0.7 Downloading alabaster-0.7.12-py2.py3-none-any.whl (14 kB) Collecting readthedocs-sphinx-ext<2.2 Downloading readthedocs_sphinx_ext-2.1.2-py2.py3-none-any.whl (11 kB) Collecting sphinx<2 Downloading Sphinx-1.8.5-py2.py3-none-any.whl (3.1 MB) Collecting six Downloading six-1.15.0-py2.py3-none-any.whl (10 kB) Collecting sphinx-rtd-theme<0.5 Downloading sphinx_rtd_theme-0.4.3-py2.py3-none-any.whl (6.4 MB) Collecting babel!=2.0,>=1.3 Downloading Babel-2.9.0-py2.py3-none-any.whl (8.8 MB) Collecting Jinja2>=2.9 Downloading Jinja2-2.11.2-py2.py3-none-any.whl (125 kB) Collecting MarkupSafe>=0.23 Downloading MarkupSafe-1.1.1-cp37-cp37m-manylinux1_x86_64.whl (27 kB) Collecting Pygments>=2.0 Downloading Pygments-2.7.4-py3-none-any.whl (950 kB) Collecting pytz>=2015.7 Downloading pytz-2020.5-py2.py3-none-any.whl (510 kB) Collecting requests Downloading requests-2.25.1-py2.py3-none-any.whl (61 kB) Collecting certifi>=2017.4.17 Downloading certifi-2020.12.5-py2.py3-none-any.whl (147 kB) Collecting chardet<5,>=3.0.2 Downloading chardet-4.0.0-py2.py3-none-any.whl (178 kB) Collecting idna<3,>=2.5 Downloading idna-2.10-py2.py3-none-any.whl (58 kB) Collecting snowballstemmer>=1.1 Downloading snowballstemmer-2.0.0-py2.py3-none-any.whl (97 kB) Collecting urllib3<1.27,>=1.21.1 Downloading urllib3-1.26.2-py2.py3-none-any.whl (136 kB) Collecting future Downloading future-0.18.2.tar.gz (829 kB) Collecting imagesize Downloading imagesize-1.2.0-py2.py3-none-any.whl (4.8 kB) Collecting packaging Downloading packaging-20.8-py2.py3-none-any.whl (39 kB) Collecting pyparsing>=2.0.2 Downloading pyparsing-2.4.7-py2.py3-none-any.whl (67 kB) Collecting sphinxcontrib-websupport Downloading sphinxcontrib_websupport-1.2.4-py2.py3-none-any.whl (39 kB) Collecting sphinxcontrib-serializinghtml Downloading sphinxcontrib_serializinghtml-1.1.4-py2.py3-none-any.whl (89 kB) Collecting setuptools==41.0.1 Downloading setuptools-41.0.1-py2.py3-none-any.whl (575 kB) Building wheels for collected packages: mock, future Building wheel for mock (setup.py): started Building wheel for mock (setup.py): finished with status 'done' Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23755 sha256=099a2e957ee9264bfd7dadb3200fdbbe0a40e83ca4d0527e46e6b08a6a8feb09 Stored in directory: /tmp/pip-ephem-wheel-cache-b0vkxv64/wheels/7a/94/b1/0fdc5339a5bd487a5cc15421ec200d9ba3e2aa7190e4a727f1 Building wheel for future (setup.py): started Building wheel for future (setup.py): finished with status 'done' Created wheel for future: filename=future-0.18.2-py3-none-any.whl size=491059 sha256=b5f83018824555c091d0fdadf9f8914506e5395beb6f5fded3a37c9a2d2d63db Stored in directory: /tmp/pip-ephem-wheel-cache-b0vkxv64/wheels/56/b0/fe/4410d17b32f1f0c3cf54cdfb2bc04d7b4b8f4ae377e2229ba0 Successfully built mock future Installing collected packages: urllib3, sphinxcontrib-serializinghtml, pytz, pyparsing, MarkupSafe, idna, chardet, certifi, sphinxcontrib-websupport, snowballstemmer, six, setuptools, requests, Pygments, packaging, Jinja2, imagesize, future, docutils, babel, alabaster, sphinx, commonmark, sphinx-rtd-theme, recommonmark, readthedocs-sphinx-ext, pillow, mock Attempting uninstall: setuptools Found existing installation: setuptools 51.1.2 Uninstalling setuptools-51.1.2: Successfully uninstalled setuptools-51.1.2 Successfully installed Jinja2-2.11.2 MarkupSafe-1.1.1 Pygments-2.7.4 alabaster-0.7.12 babel-2.9.0 certifi-2020.12.5 chardet-4.0.0 commonmark-0.8.1 docutils-0.14 future-0.18.2 idna-2.10 imagesize-1.2.0 mock-1.0.1 packaging-20.8 pillow-5.4.1 pyparsing-2.4.7 pytz-2020.5 readthedocs-sphinx-ext-2.1.2 recommonmark-0.5.0 requests-2.25.1 setuptools-41.0.1 six-1.15.0 snowballstemmer-2.0.0 sphinx-1.8.5 sphinx-rtd-theme-0.4.3 sphinxcontrib-serializinghtml-1.1.4 sphinxcontrib-websupport-1.2.4 urllib3-1.26.2 [rtd-command-info] start-time: 2021-01-15T23:48:58.073142Z, end-time: 2021-01-15T23:49:02.706027Z, duration: 4, exit-code: 0 python -m pip install --exists-action=w --no-cache-dir -r external/requirements.txt Collecting readthedocs-sphinx-search Downloading readthedocs_sphinx_search-0.1.0rc3-py3-none-any.whl (25 kB) Collecting sphinx_book_theme Downloading sphinx_book_theme-0.0.39-py3-none-any.whl (86 kB) Requirement already satisfied: sphinx in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx_book_theme->-r external/requirements.txt (line 4)) (1.8.5) Collecting docutils>=0.15 Downloading docutils-0.16-py2.py3-none-any.whl (548 kB) Collecting pydata-sphinx-theme~=0.4.1 Downloading pydata_sphinx_theme-0.4.1-py3-none-any.whl (2.1 MB) Collecting sphinx_copybutton Downloading sphinx_copybutton-0.3.1-py3-none-any.whl (10 kB) Requirement already satisfied: babel!=2.0,>=1.3 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.9.0) Requirement already satisfied: six>=1.5 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (1.15.0) Requirement already satisfied: imagesize in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (1.2.0) Requirement already satisfied: packaging in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (20.8) Requirement already satisfied: Jinja2>=2.3 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.11.2) Requirement already satisfied: Pygments>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.7.4) Requirement already satisfied: requests>=2.0.0 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.25.1) Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (41.0.1) Requirement already satisfied: alabaster<0.8,>=0.7 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (0.7.12) Requirement already satisfied: snowballstemmer>=1.1 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.0.0) Requirement already satisfied: sphinxcontrib-websupport in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (1.2.4) Requirement already satisfied: pytz>=2015.7 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from babel!=2.0,>=1.3->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2020.5) Requirement already satisfied: MarkupSafe>=0.23 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from Jinja2>=2.3->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (1.1.1) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from requests>=2.0.0->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (1.26.2) Requirement already satisfied: idna<3,>=2.5 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from requests>=2.0.0->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.10) Requirement already satisfied: certifi>=2017.4.17 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from requests>=2.0.0->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2020.12.5) Requirement already satisfied: chardet<5,>=3.0.2 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from requests>=2.0.0->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (4.0.0) Collecting sphinx_panels Downloading sphinx_panels-0.5.2-py3-none-any.whl (87 kB) Collecting sphinx Downloading Sphinx-3.4.3-py3-none-any.whl (2.9 MB) Requirement already satisfied: sphinxcontrib-serializinghtml in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (1.1.4) Collecting beautifulsoup4 Downloading beautifulsoup4-4.9.3-py3-none-any.whl (115 kB) Collecting soupsieve>1.2 Downloading soupsieve-2.1-py3-none-any.whl (32 kB) Collecting click Downloading click-7.1.2-py2.py3-none-any.whl (82 kB) Requirement already satisfied: pyparsing>=2.0.2 in /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/envs/latest/lib/python3.7/site-packages (from packaging->sphinx->sphinx_book_theme->-r external/requirements.txt (line 4)) (2.4.7) Collecting pyyaml Downloading PyYAML-5.3.1.tar.gz (269 kB) Collecting sphinxcontrib-applehelp Downloading sphinxcontrib_applehelp-1.0.2-py2.py3-none-any.whl (121 kB) Collecting sphinxcontrib-devhelp Downloading sphinxcontrib_devhelp-1.0.2-py2.py3-none-any.whl (84 kB) Collecting sphinxcontrib-htmlhelp Downloading sphinxcontrib_htmlhelp-1.0.3-py2.py3-none-any.whl (96 kB) Collecting sphinxcontrib-jsmath Downloading sphinxcontrib_jsmath-1.0.1-py2.py3-none-any.whl (5.1 kB) Collecting sphinxcontrib-qthelp Downloading sphinxcontrib_qthelp-1.0.3-py2.py3-none-any.whl (90 kB) Building wheels for collected packages: pyyaml Building wheel for pyyaml (setup.py): started Building wheel for pyyaml (setup.py): finished with status 'done' Created wheel for pyyaml: filename=PyYAML-5.3.1-cp37-cp37m-linux_x86_64.whl size=44620 sha256=64667cc13690c3b23257e159402375cf621826065c80c6f9e6e3c7e7af9d0cde Stored in directory: /tmp/pip-ephem-wheel-cache-mg3o9r_d/wheels/5e/03/1e/e1e954795d6f35dfc7b637fe2277bff021303bd9570ecea653 Successfully built pyyaml Installing collected packages: sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, docutils, sphinx, soupsieve, pyyaml, pydata-sphinx-theme, click, beautifulsoup4, sphinx-panels, sphinx-copybutton, sphinx-book-theme, readthedocs-sphinx-search Attempting uninstall: docutils Found existing installation: docutils 0.14 Uninstalling docutils-0.14: Successfully uninstalled docutils-0.14 Attempting uninstall: sphinx Found existing installation: Sphinx 1.8.5 Uninstalling Sphinx-1.8.5: Successfully uninstalled Sphinx-1.8.5 Successfully installed beautifulsoup4-4.9.3 click-7.1.2 docutils-0.16 pydata-sphinx-theme-0.4.1 pyyaml-5.3.1 readthedocs-sphinx-search-0.1.0rc3 soupsieve-2.1 sphinx-3.4.3 sphinx-book-theme-0.0.39 sphinx-copybutton-0.3.1 sphinx-panels-0.5.2 sphinxcontrib-applehelp-1.0.2 sphinxcontrib-devhelp-1.0.2 sphinxcontrib-htmlhelp-1.0.3 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-qthelp-1.0.3 [rtd-command-info] start-time: 2021-01-15T23:49:13.836690Z, end-time: 2021-01-15T23:49:13.907645Z, duration: 0, exit-code: 0 cat external/source/conf.py # Configuration file for the Sphinx documentation builder. # # This file only contains a selection of the most common options. For a full # list see the documentation: # https://www.sphinx-doc.org/en/master/usage/configuration.html # -- Path setup -------------------------------------------------------------- # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. # # import os # import sys # sys.path.insert(0, os.path.abspath('lib/python3.6/site-packages')) # -- Project information ----------------------------------------------------- project = 'Cerebras Developer' copyright = '2021, Cerebras Systems' author = '' html_title = "Cerebras Systems Documentation" html_logo = "images/CER_logo.svg" html_favicon = 'images/cerebras-favicon.png' html_last_updated_fmt = '%b, %d, %Y' # -- General configuration --------------------------------------------------- # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom # ones. extensions = [ "sphinx_copybutton", "sphinx_panels", ] # Add any paths that contain templates here, relative to this directory. templates_path = ["_templates"] html_additional_pages = { } # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. # This pattern also affects html_static_path and html_extra_path. exclude_patterns = [] # -- Options for HTML output ------------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. # html_theme = "sphinx_book_theme" html_theme_path = [] panels_add_bootstrap_css = False html_theme_options = { } # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = ['_static'] html_css_files = [ 'custom-css-for-sphinx-book-theme.css' ] ########################################################################### # auto-created readthedocs.org specific configuration # ########################################################################### # # The following code was added during an automated build on readthedocs.org # It is auto created and injected for every build. The result is based on the # conf.py.tmpl file found in the readthedocs.org codebase: # https://github.com/rtfd/readthedocs.org/blob/master/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl # import importlib import sys import os.path from six import string_types from sphinx import version_info # Get suffix for proper linking to GitHub # This is deprecated in Sphinx 1.3+, # as each page can have its own suffix if globals().get('source_suffix', False): if isinstance(source_suffix, string_types): SUFFIX = source_suffix elif isinstance(source_suffix, (list, tuple)): # Sphinx >= 1.3 supports list/tuple to define multiple suffixes SUFFIX = source_suffix[0] elif isinstance(source_suffix, dict): # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes SUFFIX = list(source_suffix.keys())[0] # make a ``list()`` for py2/py3 compatibility else: # default to .rst SUFFIX = '.rst' else: SUFFIX = '.rst' # Add RTD Static Path. Add to the end because it overwrites previous files. if not 'html_static_path' in globals(): html_static_path = [] if os.path.exists('_static'): html_static_path.append('_static') # Add RTD Theme only if they aren't overriding it already using_rtd_theme = ( ( 'html_theme' in globals() and html_theme in ['default'] and # Allow people to bail with a hack of having an html_style 'html_style' not in globals() ) or 'html_theme' not in globals() ) if using_rtd_theme: theme = importlib.import_module('sphinx_rtd_theme') html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} if 'html_theme_path' in globals(): html_theme_path.append(theme.get_html_theme_path()) else: html_theme_path = [theme.get_html_theme_path()] if globals().get('websupport2_base_url', False): websupport2_base_url = 'https://readthedocs.com/websupport' websupport2_static_url = 'https://assets.readthedocs.com/' #Add project information to the template context. context = { 'using_theme': using_rtd_theme, 'html_theme': html_theme, 'current_version': "latest", 'version_slug': "latest", 'MEDIA_URL': "https://media.readthedocs.com/media/", 'STATIC_URL': "https://assets.readthedocs.com/", 'PRODUCTION_DOMAIN': "readthedocs.com", 'versions': [ ], 'downloads': [ ("pdf", "//docs.cerebras.net/_/downloads/en/latest/pdf/"), ("html", "//docs.cerebras.net/_/downloads/en/latest/htmlzip/"), ], 'subprojects': [ ], 'slug': 'cerebras-systems-cerebras-systems-developer-documentation', 'name': u'Cerebras Systems Developer Documentation', 'rtd_language': u'en', 'programming_language': u'words', 'canonical_url': 'https://docs.cerebras.net/en/latest/', 'analytics_code': 'UA-177830181-2', 'single_version': False, 'conf_py_path': '/external/source/', 'api_host': 'https://readthedocs.com', 'github_user': 'Cerebras', 'proxied_api_host': '/_', 'github_repo': 'documentation', 'github_version': 'main', 'display_github': True, 'bitbucket_user': 'None', 'bitbucket_repo': 'None', 'bitbucket_version': 'main', 'display_bitbucket': False, 'gitlab_user': 'None', 'gitlab_repo': 'None', 'gitlab_version': 'main', 'display_gitlab': False, 'READTHEDOCS': True, 'using_theme': (html_theme == "default"), 'new_theme': (html_theme == "sphinx_rtd_theme"), 'source_suffix': SUFFIX, 'ad_free': False, 'docsearch_disabled': False, 'user_analytics_code': 'UA-177830181-2', 'global_analytics_code': 'UA-17997319-2', 'commit': '7c5a0345', } # For sphinx >=1.8 we can use html_baseurl to set the canonical URL. # https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-html_baseurl if version_info >= (1, 8): if not globals().get('html_baseurl'): html_baseurl = context['canonical_url'] context['canonical_url'] = None if 'html_context' in globals(): html_context.update(context) else: html_context = context # Add custom RTD extension if 'extensions' in globals(): # Insert at the beginning because it can interfere # with other extensions. # See https://github.com/rtfd/readthedocs.org/pull/4054 extensions.insert(0, "readthedocs_ext.readthedocs") else: extensions = ["readthedocs_ext.readthedocs"] # Add External version warning banner to the external version documentation if 'branch' == 'external': extensions.insert(1, "readthedocs_ext.external_version_warning") project_language = 'en' # User's Sphinx configurations language_user = globals().get('language', None) latex_engine_user = globals().get('latex_engine', None) latex_elements_user = globals().get('latex_elements', None) # Remove this once xindy gets installed in Docker image and XINDYOPS # env variable is supported # https://github.com/rtfd/readthedocs-docker-images/pull/98 latex_use_xindy = False chinese = any([ language_user in ('zh_CN', 'zh_TW'), project_language in ('zh_CN', 'zh_TW'), ]) japanese = any([ language_user == 'ja', project_language == 'ja', ]) if chinese: latex_engine = latex_engine_user or 'xelatex' latex_elements_rtd = { 'preamble': '\\usepackage[UTF8]{ctex}\n', } latex_elements = latex_elements_user or latex_elements_rtd elif japanese: latex_engine = latex_engine_user or 'platex' # Make sure our build directory is always excluded exclude_patterns = globals().get('exclude_patterns', []) exclude_patterns.extend(['_build']) [rtd-command-info] start-time: 2021-01-15T23:49:14.056030Z, end-time: 2021-01-15T23:49:16.661392Z, duration: 2, exit-code: 0 python sphinx-build -T -E -b readthedocs -d _build/doctrees-readthedocs -D language=en . _build/html Running Sphinx v3.4.3 loading translations [en]... done making output directory... done building [mo]: targets for 0 po files that are out of date building [readthedocs]: targets for 30 source files that are out of date updating environment: [new config] 30 added, 0 changed, 0 removed reading sources... [ 3%] cs-1-tf-user-guide/cs-1-data-formats reading sources... [ 6%] cs-1-tf-user-guide/programming-using-cerebrasestimator/cerebrasestimator reading sources... [ 10%] cs-1-tf-user-guide/programming-using-cerebrasestimator/cerebrasestimator-vs-tf-estimator reading sources... [ 13%] cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator reading sources... [ 16%] cs-1-tf-user-guide/programming-using-cerebrasestimator/index reading sources... [ 20%] cs-1-tf-user-guide/programming-using-cerebrasestimator/tensorflow-estimator reading sources... [ 23%] cs-1-tf-user-guide/running-a-model/index reading sources... [ 26%] cs-1-tf-user-guide/running-a-model/on-cpu-gpu reading sources... [ 30%] cs-1-tf-user-guide/running-a-model/precompilation-on-cpu reading sources... [ 33%] cs-1-tf-user-guide/running-a-model/the-cs-1-execution-model reading sources... [ 36%] cs-1-tf-user-guide/running-a-model/training-on-cs-1-with-slurm reading sources... [ 40%] cs-1-tf-user-guide/troubleshooting/faqs reading sources... [ 43%] cs-1-tf-user-guide/troubleshooting/index reading sources... [ 46%] cs-1-tf-user-guide/troubleshooting/interpreting-error-messages reading sources... [ 50%] cs-1-tf-user-guide/tuning-tf-for-cs-1/best-practices-tf reading sources... [ 53%] cs-1-tf-user-guide/tuning-tf-for-cs-1/dynamic-loss-scaling reading sources... [ 56%] cs-1-tf-user-guide/tuning-tf-for-cs-1/index reading sources... [ 60%] cs-1-tf-user-guide/tuning-tf-for-cs-1/input-function-analyzer reading sources... [ 63%] cs-1-tf-user-guide/tuning-tf-for-cs-1/using-tensorboard reading sources... [ 66%] getting-started/basic-concept reading sources... [ 70%] getting-started/how-it-works reading sources... [ 73%] getting-started/up-and-running reading sources... [ 76%] index reading sources... [ 80%] quickstart/cs-1-quickstart reading sources... [ 83%] release-notes/rel-notes-0.6.3 reading sources... [ 86%] release-notes/rel-notes-0.7.0 reading sources... [ 90%] release-notes/rel-notes-cumulative reading sources... [ 93%] tutorials/tut-bert reading sources... [ 96%] tutorials/tut-fc-mnist reading sources... [100%] tutorials/tut-molecular-graph looking for now-outdated files... none found pickling environment... done checking consistency... /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/cs-1-tf-user-guide/tuning-tf-for-cs-1/index.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/getting-started/basic-concept.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/getting-started/up-and-running.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/release-notes/rel-notes-0.6.3.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/release-notes/rel-notes-0.7.0.rst: WARNING: document isn't included in any toctree done preparing documents... done writing output... [ 3%] cs-1-tf-user-guide/cs-1-data-formats writing output... [ 6%] cs-1-tf-user-guide/programming-using-cerebrasestimator/cerebrasestimator writing output... [ 10%] cs-1-tf-user-guide/programming-using-cerebrasestimator/cerebrasestimator-vs-tf-estimator writing output... [ 13%] cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator writing output... [ 16%] cs-1-tf-user-guide/programming-using-cerebrasestimator/index writing output... [ 20%] cs-1-tf-user-guide/programming-using-cerebrasestimator/tensorflow-estimator writing output... [ 23%] cs-1-tf-user-guide/running-a-model/index writing output... [ 26%] cs-1-tf-user-guide/running-a-model/on-cpu-gpu writing output... [ 30%] cs-1-tf-user-guide/running-a-model/precompilation-on-cpu writing output... [ 33%] cs-1-tf-user-guide/running-a-model/the-cs-1-execution-model writing output... [ 36%] cs-1-tf-user-guide/running-a-model/training-on-cs-1-with-slurm writing output... [ 40%] cs-1-tf-user-guide/troubleshooting/faqs writing output... [ 43%] cs-1-tf-user-guide/troubleshooting/index writing output... [ 46%] cs-1-tf-user-guide/troubleshooting/interpreting-error-messages writing output... [ 50%] cs-1-tf-user-guide/tuning-tf-for-cs-1/best-practices-tf writing output... [ 53%] cs-1-tf-user-guide/tuning-tf-for-cs-1/dynamic-loss-scaling writing output... [ 56%] cs-1-tf-user-guide/tuning-tf-for-cs-1/index writing output... [ 60%] cs-1-tf-user-guide/tuning-tf-for-cs-1/input-function-analyzer writing output... [ 63%] cs-1-tf-user-guide/tuning-tf-for-cs-1/using-tensorboard writing output... [ 66%] getting-started/basic-concept writing output... [ 70%] getting-started/how-it-works writing output... [ 73%] getting-started/up-and-running writing output... [ 76%] index writing output... [ 80%] quickstart/cs-1-quickstart writing output... [ 83%] release-notes/rel-notes-0.6.3 writing output... [ 86%] release-notes/rel-notes-0.7.0 writing output... [ 90%] release-notes/rel-notes-cumulative writing output... [ 93%] tutorials/tut-bert writing output... [ 96%] tutorials/tut-fc-mnist writing output... [100%] tutorials/tut-molecular-graph generating indices... /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator.rst:164: WARNING: Could not lex literal_block as "python". Highlighting skipped. /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator.rst:213: WARNING: Could not lex literal_block as "python". Highlighting skipped. /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator.rst:285: WARNING: Could not lex literal_block as "python". Highlighting skipped. genindex done writing additional pages... search done copying images... [100%] cs-1-tf-user-guide/running-a-model/../../images/cs1-execution-model.png copying static files... done copying extra files... done dumping search index in English (code: en)... done dumping object inventory... done build succeeded, 8 warnings. The HTML pages are in _build/html. Updating searchtools for Read the Docs search... [rtd-command-info] start-time: 2021-01-15T23:49:16.801588Z, end-time: 2021-01-15T23:49:18.355360Z, duration: 1, exit-code: 0 python sphinx-build -T -b readthedocssinglehtmllocalmedia -d _build/doctrees-readthedocssinglehtmllocalmedia -D language=en . _build/localmedia Running Sphinx v3.4.3 loading translations [en]... done making output directory... done building [mo]: targets for 0 po files that are out of date building [readthedocssinglehtmllocalmedia]: all documents updating environment: [new config] 30 added, 0 changed, 0 removed reading sources... [ 3%] cs-1-tf-user-guide/cs-1-data-formats reading sources... [ 6%] cs-1-tf-user-guide/programming-using-cerebrasestimator/cerebrasestimator reading sources... [ 10%] cs-1-tf-user-guide/programming-using-cerebrasestimator/cerebrasestimator-vs-tf-estimator reading sources... [ 13%] cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator reading sources... [ 16%] cs-1-tf-user-guide/programming-using-cerebrasestimator/index reading sources... [ 20%] cs-1-tf-user-guide/programming-using-cerebrasestimator/tensorflow-estimator reading sources... [ 23%] cs-1-tf-user-guide/running-a-model/index reading sources... [ 26%] cs-1-tf-user-guide/running-a-model/on-cpu-gpu reading sources... [ 30%] cs-1-tf-user-guide/running-a-model/precompilation-on-cpu reading sources... [ 33%] cs-1-tf-user-guide/running-a-model/the-cs-1-execution-model reading sources... [ 36%] cs-1-tf-user-guide/running-a-model/training-on-cs-1-with-slurm reading sources... [ 40%] cs-1-tf-user-guide/troubleshooting/faqs reading sources... [ 43%] cs-1-tf-user-guide/troubleshooting/index reading sources... [ 46%] cs-1-tf-user-guide/troubleshooting/interpreting-error-messages reading sources... [ 50%] cs-1-tf-user-guide/tuning-tf-for-cs-1/best-practices-tf reading sources... [ 53%] cs-1-tf-user-guide/tuning-tf-for-cs-1/dynamic-loss-scaling reading sources... [ 56%] cs-1-tf-user-guide/tuning-tf-for-cs-1/index reading sources... [ 60%] cs-1-tf-user-guide/tuning-tf-for-cs-1/input-function-analyzer reading sources... [ 63%] cs-1-tf-user-guide/tuning-tf-for-cs-1/using-tensorboard reading sources... [ 66%] getting-started/basic-concept reading sources... [ 70%] getting-started/how-it-works reading sources... [ 73%] getting-started/up-and-running reading sources... [ 76%] index reading sources... [ 80%] quickstart/cs-1-quickstart reading sources... [ 83%] release-notes/rel-notes-0.6.3 reading sources... [ 86%] release-notes/rel-notes-0.7.0 reading sources... [ 90%] release-notes/rel-notes-cumulative reading sources... [ 93%] tutorials/tut-bert reading sources... [ 96%] tutorials/tut-fc-mnist reading sources... [100%] tutorials/tut-molecular-graph looking for now-outdated files... none found pickling environment... done checking consistency... /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/cs-1-tf-user-guide/tuning-tf-for-cs-1/index.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/getting-started/basic-concept.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/getting-started/up-and-running.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/release-notes/rel-notes-0.6.3.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/release-notes/rel-notes-0.7.0.rst: WARNING: document isn't included in any toctree done preparing documents... done assembling single document... release-notes/rel-notes-cumulative quickstart/cs-1-quickstart getting-started/how-it-works cs-1-tf-user-guide/running-a-model/the-cs-1-execution-model tutorials/tut-fc-mnist tutorials/tut-bert tutorials/tut-molecular-graph cs-1-tf-user-guide/programming-using-cerebrasestimator/index cs-1-tf-user-guide/programming-using-cerebrasestimator/tensorflow-estimator cs-1-tf-user-guide/programming-using-cerebrasestimator/cerebrasestimator cs-1-tf-user-guide/programming-using-cerebrasestimator/cerebrasestimator-vs-tf-estimator cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator cs-1-tf-user-guide/running-a-model/index cs-1-tf-user-guide/running-a-model/training-on-cs-1-with-slurm cs-1-tf-user-guide/running-a-model/on-cpu-gpu cs-1-tf-user-guide/running-a-model/precompilation-on-cpu cs-1-tf-user-guide/tuning-tf-for-cs-1/input-function-analyzer cs-1-tf-user-guide/cs-1-data-formats cs-1-tf-user-guide/tuning-tf-for-cs-1/dynamic-loss-scaling cs-1-tf-user-guide/tuning-tf-for-cs-1/using-tensorboard cs-1-tf-user-guide/tuning-tf-for-cs-1/best-practices-tf cs-1-tf-user-guide/troubleshooting/index cs-1-tf-user-guide/troubleshooting/interpreting-error-messages cs-1-tf-user-guide/troubleshooting/faqs done writing... /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator.rst:164: WARNING: Could not lex literal_block as "python". Highlighting skipped. /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator.rst:213: WARNING: Could not lex literal_block as "python". Highlighting skipped. /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator.rst:285: WARNING: Could not lex literal_block as "python". Highlighting skipped. done writing additional files... done copying images... [100%] cs-1-tf-user-guide/running-a-model/../../images/cs1-execution-model.png copying static files... done copying extra files... done dumping object inventory... done build succeeded, 8 warnings. The HTML page is in _build/localmedia. Updating searchtools for Read the Docs search... [rtd-command-info] start-time: 2021-01-15T23:49:18.480146Z, end-time: 2021-01-15T23:49:19.829898Z, duration: 1, exit-code: 0 python sphinx-build -b latex -D language=en -d _build/doctrees . _build/latex Running Sphinx v3.4.3 loading translations [en]... done making output directory... done building [mo]: targets for 0 po files that are out of date building [latex]: all documents updating environment: [new config] 30 added, 0 changed, 0 removed reading sources... [ 3%] cs-1-tf-user-guide/cs-1-data-formats reading sources... [ 6%] cs-1-tf-user-guide/programming-using-cerebrasestimator/cerebrasestimator reading sources... [ 10%] cs-1-tf-user-guide/programming-using-cerebrasestimator/cerebrasestimator-vs-tf-estimator reading sources... [ 13%] cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator reading sources... [ 16%] cs-1-tf-user-guide/programming-using-cerebrasestimator/index reading sources... [ 20%] cs-1-tf-user-guide/programming-using-cerebrasestimator/tensorflow-estimator reading sources... [ 23%] cs-1-tf-user-guide/running-a-model/index reading sources... [ 26%] cs-1-tf-user-guide/running-a-model/on-cpu-gpu reading sources... [ 30%] cs-1-tf-user-guide/running-a-model/precompilation-on-cpu reading sources... [ 33%] cs-1-tf-user-guide/running-a-model/the-cs-1-execution-model reading sources... [ 36%] cs-1-tf-user-guide/running-a-model/training-on-cs-1-with-slurm reading sources... [ 40%] cs-1-tf-user-guide/troubleshooting/faqs reading sources... [ 43%] cs-1-tf-user-guide/troubleshooting/index reading sources... [ 46%] cs-1-tf-user-guide/troubleshooting/interpreting-error-messages reading sources... [ 50%] cs-1-tf-user-guide/tuning-tf-for-cs-1/best-practices-tf reading sources... [ 53%] cs-1-tf-user-guide/tuning-tf-for-cs-1/dynamic-loss-scaling reading sources... [ 56%] cs-1-tf-user-guide/tuning-tf-for-cs-1/index reading sources... [ 60%] cs-1-tf-user-guide/tuning-tf-for-cs-1/input-function-analyzer reading sources... [ 63%] cs-1-tf-user-guide/tuning-tf-for-cs-1/using-tensorboard reading sources... [ 66%] getting-started/basic-concept reading sources... [ 70%] getting-started/how-it-works reading sources... [ 73%] getting-started/up-and-running reading sources... [ 76%] index reading sources... [ 80%] quickstart/cs-1-quickstart reading sources... [ 83%] release-notes/rel-notes-0.6.3 reading sources... [ 86%] release-notes/rel-notes-0.7.0 reading sources... [ 90%] release-notes/rel-notes-cumulative reading sources... [ 93%] tutorials/tut-bert reading sources... [ 96%] tutorials/tut-fc-mnist reading sources... [100%] tutorials/tut-molecular-graph looking for now-outdated files... none found pickling environment... done checking consistency... /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/cs-1-tf-user-guide/tuning-tf-for-cs-1/index.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/getting-started/basic-concept.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/getting-started/up-and-running.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/release-notes/rel-notes-0.6.3.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/release-notes/rel-notes-0.7.0.rst: WARNING: document isn't included in any toctree done processing cerebrasdeveloper.tex... index release-notes/rel-notes-cumulative quickstart/cs-1-quickstart getting-started/how-it-works cs-1-tf-user-guide/running-a-model/the-cs-1-execution-model tutorials/tut-fc-mnist tutorials/tut-bert tutorials/tut-molecular-graph cs-1-tf-user-guide/programming-using-cerebrasestimator/index cs-1-tf-user-guide/programming-using-cerebrasestimator/tensorflow-estimator cs-1-tf-user-guide/programming-using-cerebrasestimator/cerebrasestimator cs-1-tf-user-guide/programming-using-cerebrasestimator/cerebrasestimator-vs-tf-estimator cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator cs-1-tf-user-guide/running-a-model/index cs-1-tf-user-guide/running-a-model/training-on-cs-1-with-slurm cs-1-tf-user-guide/running-a-model/on-cpu-gpu cs-1-tf-user-guide/running-a-model/precompilation-on-cpu cs-1-tf-user-guide/tuning-tf-for-cs-1/input-function-analyzer cs-1-tf-user-guide/cs-1-data-formats cs-1-tf-user-guide/tuning-tf-for-cs-1/dynamic-loss-scaling cs-1-tf-user-guide/tuning-tf-for-cs-1/using-tensorboard cs-1-tf-user-guide/tuning-tf-for-cs-1/best-practices-tf cs-1-tf-user-guide/troubleshooting/index cs-1-tf-user-guide/troubleshooting/interpreting-error-messages cs-1-tf-user-guide/troubleshooting/faqs resolving references... done writing... /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator.rst:164: WARNING: Could not lex literal_block as "python". Highlighting skipped. /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator.rst:213: WARNING: Could not lex literal_block as "python". Highlighting skipped. /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/cs-1-tf-user-guide/programming-using-cerebrasestimator/example-walk-through-cs-estimator.rst:285: WARNING: Could not lex literal_block as "python". Highlighting skipped. done copying images... [100%] cs-1-tf-user-guide/running-a-model/../../images/cs1-execution-model.png copying TeX support files... copying TeX support files... done build succeeded, 8 warnings. The LaTeX files are in _build/latex. Run 'make' in that directory to run these through (pdf)latex (use `make latexpdf' here to do that automatically). WARNING: Missing searchtools: /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/_build/latex/_static/searchtools.js [rtd-command-info] start-time: 2021-01-15T23:49:20.245034Z, end-time: 2021-01-15T23:49:20.302096Z, duration: 0, exit-code: 0 cat latexmkrc $latex = 'latex ' . $ENV{'LATEXOPTS'} . ' %O %S'; $pdflatex = 'pdflatex ' . $ENV{'LATEXOPTS'} . ' %O %S'; $lualatex = 'lualatex ' . $ENV{'LATEXOPTS'} . ' %O %S'; $xelatex = 'xelatex --no-pdf ' . $ENV{'LATEXOPTS'} . ' %O %S'; $makeindex = 'makeindex -s python.ist %O -o %D %S'; add_cus_dep( "glo", "gls", 0, "makeglo" ); sub makeglo { return system( "makeindex -s gglo.ist -o '$_[0].gls' '$_[0].glo'" ); } [rtd-command-info] start-time: 2021-01-15T23:49:20.900221Z, end-time: 2021-01-15T23:49:23.033250Z, duration: 2, exit-code: 0 latexmk -r latexmkrc -pdf -f -dvi- -ps- -jobname=cerebras-systems-cerebras-systems-developer-documentation -interaction=nonstopmode Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 1, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 2, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 3, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 4, chunk 1. Subroutine makeglo redefined at (eval 11) line 7, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 1, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 2, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 3, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 4, chunk 1. Latexmk: This is Latexmk, John Collins, 1 January 2015, version: 4.41. File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at /usr/bin/latexmk line 7482. Rule 'pdflatex': Rules & subrules not known to be previously run: pdflatex Rule 'pdflatex': The following rules & subrules became out-of-date: 'pdflatex' ------------ Run number 1 of rule 'pdflatex' ------------ ------------ Running 'pdflatex -interaction=nonstopmode -recorder --jobname="cerebras-systems-cerebras-systems-developer-documentation" "cerebrasdeveloper.tex"' ------------ Latexmk: applying rule 'pdflatex'... This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (./cerebrasdeveloper.tex LaTeX2e <2017-04-15> Babel <3.18> and hyphenation patterns for 84 language(s) loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2019/12/01 v2.3.0 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty)) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def) (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def (/usr/share/texlive/texmf-dist/tex/generic/babel/txtbabel.def)))) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/times.sty) (/usr/share/texlive/texmf-dist/tex/latex/fncychap/fncychap.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def))) (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty) (/usr/share/texlive/texmf-dist/tex/latex/tabulary/tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (/usr/share/texlive/texmf-dist/tex/latex/varwidth/varwidth.sty) (./sphinxmulticell.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty) (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty) (/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg)) (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz)) (./footnotehyper-sphinx.sty) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty) (/usr/share/texlive/texmf-dist/tex/latex/carlisle/remreset.sty) (./sphinxhighlight.sty) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty))))) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/puenc.def) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) (./sphinxmessages.sty) Writing index file cerebras-systems-cerebras-systems-developer-documentation.id x (./cerebras-systems-cerebras-systems-developer-documentation.aux) (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) *geometry* driver: auto-detecting *geometry* detected driver: pdftex (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1phv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] [1] [2] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1ptm.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd) [1] [2] Chapter 1. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/tuning-tf-for-cs-1/input-fun ction-analyzer:input-function-analyzer' on page 3 undefined on input line 136. [3] [4] Chapter 2. ! Package inputenc Error: Unicode char ​ (U+200B) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.186 ...{\sphinxupquote{​support@cerebras.net}} , with \sphinxcode{\sphinx... [5] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/running-a-model/training-on- cs-1-with-slurm:train-on-cs-1-with-slurm' on page 6 undefined on input line 271 . Underfull \hbox (badness 10000) in paragraph at lines 274--275 []\T1/pcr/m/n/10 NUM_WORKER_NODES=1 srun_train python run.py --mode train [6] [7] ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} [8] Chapter 3. [9] [10] Chapter 4. [11] [12 <./cs1-execution-model.png>] Chapter 5. [13] [14] Chapter 6. [15] [16] Chapter 7. [17] [18] Chapter 8. [19] [20] [21] Underfull \hbox (badness 10000) in paragraph at lines 842--843 []\T1/ptm/m/n/10 These con-fig-u-ra-tions in-clude prop-er-ties such as \T1/pcr /m/n/10 cluster_spec\T1/ptm/m/n/10 , \T1/pcr/m/n/10 is_chief\T1/ptm/m/n/10 , \T 1/pcr/m/n/10 master\T1/ptm/m/n/10 , (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1pcr.fd) [22] [23] [24] Underfull \hbox (badness 10000) in paragraph at lines 1005--1006 []\T1/pcr/m/n/10 [Unsupported TensorFlow] Detected unsupported eval_metric_ops in CS-1 Underfull \hbox (badness 10000) in paragraph at lines 1030--1031 []\T1/pcr/m/n/10 dataset = dataset.shuffle(1000).repeat().batch(batch_size, [25] Underfull \hbox (badness 10000) in paragraph at lines 1074--1075 []\T1/pcr/m/n/10 dataset = dataset.shuffle(1000).repeat().batch(batch_size, Underfull \hbox (badness 10000) in paragraph at lines 1082--1083 []\T1/pcr/m/n/10 [Unsupported TensorFlow] Inconsistent batch sizes detected. To ensure Underfull \hbox (badness 10000) in paragraph at lines 1082--1083 \T1/pcr/m/n/10 a fixed batch size across all steps, set \TS1/pcr/m/n/10 `\T1/pc r/m/n/10 drop_remainder=True\TS1/pcr/m/n/10 ` \T1/pcr/m/n/10 when [26] [27] [28] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/programming-using-cerebrases timator/cerebrasestimator-vs-tf-estimator:cs-estimator-input-function' on page 29 undefined on input line 1236. [29] [30] [31] [32] Chapter 9. [33] [34] Underfull \hbox (badness 10000) in paragraph at lines 1592--1593 []\T1/pcr/m/n/10 est = CerebrasEstimator(model_fn, params, config=config, model _dir="./out", [35] [36] [37] [38] Chapter 10. [39] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/programming-using-cerebrases timator/cerebrasestimator-vs-tf-estimator:cerebras-estimator-vs-tf-estimator' o n page 40 undefined on input line 1810. Overfull \hbox (0.56348pt too wide) in paragraph at lines 1906--1906 []\T1/phv/m/n/10 An- Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/phv/m/n/10 a- Overfull \hbox (5.96362pt too wide) in paragraph at lines 1906--1906 \T1/phv/m/n/10 lyzer Overfull \hbox (13.14355pt too wide) in paragraph at lines 1906--1906 \T1/phv/m/n/10 Check Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/phv/m/n/10 in Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/phv/m/n/10 in- Overfull \hbox (12.80319pt too wide) in paragraph at lines 1906--1906 \T1/phv/m/n/10 put_fn| Overfull \hbox (51.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 buffer_size| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 The value found for Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 buffer_size \T1/ptm/m/n/10 ar-gu-ment. Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/ptm/m/n/10 See \T1/pcr/m/n/10 TFRecordDataset\T1/ptm/m/n/10 , Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 TextLineDataset \T1/ptm/m/n/10 and Overfull \hbox (19.37885pt too wide) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 FixedLengthRecordDatasetV2 Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/ptm/m/n/10 the \T1/pcr/m/n/10 dataset.prefetch()\T1/ptm/m/n/10 . Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 For \T1/pcr/m/n/10 dataset.prefetch() \T1/ptm/m/n/10 if not se t to \T1/pcr/m/n/10 tf.data. Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 experimental.AUTOTUNE\T1/ptm/m/n/10 , then rec-om-mends the Overfull \hbox (93.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 num_parallel_calls| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 Checks if Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 num_parallel_calls \T1/ptm/m/n/10 is Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 AUTOTUNE\T1/ptm/m/n/10 . If set to some-thing other than \T1/pcr /m/n/10 tf. Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 data.experimental.AUTOTUNE\T1/ptm/m/n/10 , then sug-gests set- Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/ptm/m/n/10 ting to \T1/pcr/m/n/10 tf.data.experimental.AUTOTUNE\T1/ptm/m/n/ 10 , as: Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 dataset = dataset.interleave(map_func, Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 num_parallel_calls=tf.data.experimental. Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 num_parallel_calls=tf.data.experimental. Overfull \hbox (9.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 size| Overfull \hbox (69.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 drop_remainder| Overfull \hbox (45.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 flat_map()| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 Checks if the method Overfull \hbox (15.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 count| Overfull \hbox (9.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 seed| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/ptm/m/n/10 must be set to \T1/pcr/m/n/10 None\T1/ptm/m/n/10 , as in: \T1/pc r/m/n/10 dataset = dataset. Overfull \hbox (45.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 batch_size| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 Dis-plays the value of Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 batch_size \T1/ptm/m/n/10 pa-ram-e-ter in Overfull \hbox (33.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 repeat()| Overfull \hbox (27.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 batch()| Overfull \hbox (45.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 prefetch()| [40] [41] Overfull \vbox (345.76988pt too high) has occurred while \output is active [42] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/programming-using-cerebrases timator/cerebrasestimator-vs-tf-estimator:cerebras-estimator-vs-tf-estimator' o n page 43 undefined on input line 1926. [43] [44] Chapter 11. [45] [46] Chapter 12. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/cs-1-data-formats:data-forma ts' on page 47 undefined on input line 2095. [47] [48] Chapter 13. [49] [50] Chapter 14. [51] [52] Chapter 15. LaTeX Warning: Hyper reference `cs-1-tf-user-guide/tuning-tf-for-cs-1/input-fun ction-analyzer:input-function-analyzer' on page 53 undefined on input line 2257 . LaTeX Warning: Hyper reference `cs-1-tf-user-guide/programming-using-cerebrases timator/example-walk-through-cs-estimator:walkthrough-mixed-precision' on page 53 undefined on input line 2265. [53] LaTeX Warning: Hyper reference `cs-1-tf-user-guide/programming-using-cerebrases timator/cerebrasestimator:cs-est-config' on page 54 undefined on input line 228 3. Underfull \hbox (badness 10000) in paragraph at lines 2291--2292 []\T1/pcr/m/n/10 singularity shell /data/shared/software/singularity/cbcore_lat est. No file cerebras-systems-cerebras-systems-developer-documentation.ind. [54] (./cerebras-systems-cerebras-systems-developer-documentation.aux) Package rerunfilecheck Warning: File `cerebras-systems-cerebras-systems-develop er-documentation.out' has changed. (rerunfilecheck) Rerun to get outlines right (rerunfilecheck) or use package `bookmark'. LaTeX Warning: There were undefined references. LaTeX Warning: Label(s) may have changed. Rerun to get cross-references right. ) (see the transcript file for additional information){/usr/share/texlive/texmf-d ist/fonts/enc/dvips/base/8r.enc} Output written on cerebras-systems-cerebras-systems-developer-documentation.pdf (58 pages, 238061 bytes). Transcript written on cerebras-systems-cerebras-systems-developer-documentation .log. Latexmk: Index file 'cerebras-systems-cerebras-systems-developer-documentation.id' written ==> but it has an extension I do not know how to handle <== Latexmk: Index file 'cerebras-systems-cerebras-systems-developer-documentation.idx' was written Latexmk: Missing input file: 'cerebras-systems-cerebras-systems-developer-documentation.ind' from line 'No file cerebras-systems-cerebras-systems-developer-documentation.ind.' Latexmk: References changed. Latexmk: References changed. Latexmk: Log file says output to 'cerebras-systems-cerebras-systems-developer-documentation.pdf' Rule 'makeindex cerebras-systems-cerebras-systems-developer-documentation.idx': File changes, etc: Non-existent destination files: 'cerebras-systems-cerebras-systems-developer-documentation.ind' ------------ Run number 1 of rule 'makeindex cerebras-systems-cerebras-systems-developer-documentation.idx' ------------ ------------ Running 'makeindex -s python.ist -o "cerebras-systems-cerebras-systems-developer-documentation.ind" "cerebras-systems-cerebras-systems-developer-documentation.idx"' ------------ Latexmk: applying rule 'makeindex cerebras-systems-cerebras-systems-developer-documentation.idx'... This is makeindex, version 2.15 [TeX Live 2017] (kpathsea + Thai support). Scanning style file ./python.ist.......done (7 attributes redefined, 0 ignored). Scanning input file cerebras-systems-cerebras-systems-developer-documentation.idx...done (0 entries accepted, 0 rejected). Nothing written in cerebras-systems-cerebras-systems-developer-documentation.ind. Transcript written in cerebras-systems-cerebras-systems-developer-documentation.ilg. Rule 'pdflatex': File changes, etc: Changed files, or newly in use since previous run(s): 'cerebras-systems-cerebras-systems-developer-documentation.aux' 'cerebras-systems-cerebras-systems-developer-documentation.ind' ------------ Run number 2 of rule 'pdflatex' ------------ ------------ Running 'pdflatex -interaction=nonstopmode -recorder --jobname="cerebras-systems-cerebras-systems-developer-documentation" "cerebrasdeveloper.tex"' ------------ Latexmk: applying rule 'pdflatex'... This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (./cerebrasdeveloper.tex LaTeX2e <2017-04-15> Babel <3.18> and hyphenation patterns for 84 language(s) loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2019/12/01 v2.3.0 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty)) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def) (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def (/usr/share/texlive/texmf-dist/tex/generic/babel/txtbabel.def)))) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/times.sty) (/usr/share/texlive/texmf-dist/tex/latex/fncychap/fncychap.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def))) (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty) (/usr/share/texlive/texmf-dist/tex/latex/tabulary/tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (/usr/share/texlive/texmf-dist/tex/latex/varwidth/varwidth.sty) (./sphinxmulticell.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty) (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty) (/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg)) (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz)) (./footnotehyper-sphinx.sty) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty) (/usr/share/texlive/texmf-dist/tex/latex/carlisle/remreset.sty) (./sphinxhighlight.sty) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty))))) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/puenc.def) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) (./sphinxmessages.sty) Writing index file cerebras-systems-cerebras-systems-developer-documentation.id x (./cerebras-systems-cerebras-systems-developer-documentation.aux) (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) *geometry* driver: auto-detecting *geometry* detected driver: pdftex (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) (./cerebras-systems-cerebras-systems-developer-documentation.out) (./cerebras-systems-cerebras-systems-developer-documentation.out) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1phv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] (./cerebras-systems-cerebras-systems-developer-documentation.toc [1]) [2] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1ptm.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd) [1] [2] Chapter 1. [3] [4] Chapter 2. ! Package inputenc Error: Unicode char ​ (U+200B) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.186 ...{\sphinxupquote{​support@cerebras.net}} , with \sphinxcode{\sphinx... [5] Underfull \hbox (badness 10000) in paragraph at lines 274--275 []\T1/pcr/m/n/10 NUM_WORKER_NODES=1 srun_train python run.py --mode train [6] [7] ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} [8] Chapter 3. [9] [10] Chapter 4. [11] [12 <./cs1-execution-model.png>] Chapter 5. [13] [14] Chapter 6. [15] [16] Chapter 7. [17] [18] Chapter 8. [19] [20] [21] Underfull \hbox (badness 10000) in paragraph at lines 842--843 []\T1/ptm/m/n/10 These con-fig-u-ra-tions in-clude prop-er-ties such as \T1/pcr /m/n/10 cluster_spec\T1/ptm/m/n/10 , \T1/pcr/m/n/10 is_chief\T1/ptm/m/n/10 , \T 1/pcr/m/n/10 master\T1/ptm/m/n/10 , (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1pcr.fd) [22] [23] [24] Underfull \hbox (badness 10000) in paragraph at lines 1005--1006 []\T1/pcr/m/n/10 [Unsupported TensorFlow] Detected unsupported eval_metric_ops in CS-1 Underfull \hbox (badness 10000) in paragraph at lines 1030--1031 []\T1/pcr/m/n/10 dataset = dataset.shuffle(1000).repeat().batch(batch_size, [25] Underfull \hbox (badness 10000) in paragraph at lines 1074--1075 []\T1/pcr/m/n/10 dataset = dataset.shuffle(1000).repeat().batch(batch_size, Underfull \hbox (badness 10000) in paragraph at lines 1082--1083 []\T1/pcr/m/n/10 [Unsupported TensorFlow] Inconsistent batch sizes detected. To ensure Underfull \hbox (badness 10000) in paragraph at lines 1082--1083 \T1/pcr/m/n/10 a fixed batch size across all steps, set \TS1/pcr/m/n/10 `\T1/pc r/m/n/10 drop_remainder=True\TS1/pcr/m/n/10 ` \T1/pcr/m/n/10 when [26] [27] [28] [29] [30] [31] [32] Chapter 9. [33] [34] Underfull \hbox (badness 10000) in paragraph at lines 1592--1593 []\T1/pcr/m/n/10 est = CerebrasEstimator(model_fn, params, config=config, model _dir="./out", [35] [36] [37] [38] Chapter 10. [39] Overfull \hbox (0.56348pt too wide) in paragraph at lines 1906--1906 []\T1/phv/m/n/10 An- Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/phv/m/n/10 a- Overfull \hbox (5.96362pt too wide) in paragraph at lines 1906--1906 \T1/phv/m/n/10 lyzer Overfull \hbox (13.14355pt too wide) in paragraph at lines 1906--1906 \T1/phv/m/n/10 Check Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/phv/m/n/10 in Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/phv/m/n/10 in- Overfull \hbox (12.80319pt too wide) in paragraph at lines 1906--1906 \T1/phv/m/n/10 put_fn| Overfull \hbox (51.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 buffer_size| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 The value found for Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 buffer_size \T1/ptm/m/n/10 ar-gu-ment. Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/ptm/m/n/10 See \T1/pcr/m/n/10 TFRecordDataset\T1/ptm/m/n/10 , Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 TextLineDataset \T1/ptm/m/n/10 and Overfull \hbox (19.37885pt too wide) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 FixedLengthRecordDatasetV2 Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/ptm/m/n/10 the \T1/pcr/m/n/10 dataset.prefetch()\T1/ptm/m/n/10 . Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 For \T1/pcr/m/n/10 dataset.prefetch() \T1/ptm/m/n/10 if not se t to \T1/pcr/m/n/10 tf.data. Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 experimental.AUTOTUNE\T1/ptm/m/n/10 , then rec-om-mends the Overfull \hbox (93.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 num_parallel_calls| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 Checks if Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 num_parallel_calls \T1/ptm/m/n/10 is Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 AUTOTUNE\T1/ptm/m/n/10 . If set to some-thing other than \T1/pcr /m/n/10 tf. Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 data.experimental.AUTOTUNE\T1/ptm/m/n/10 , then sug-gests set- Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/ptm/m/n/10 ting to \T1/pcr/m/n/10 tf.data.experimental.AUTOTUNE\T1/ptm/m/n/ 10 , as: Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 dataset = dataset.interleave(map_func, Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 num_parallel_calls=tf.data.experimental. Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 num_parallel_calls=tf.data.experimental. Overfull \hbox (9.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 size| Overfull \hbox (69.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 drop_remainder| Overfull \hbox (45.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 flat_map()| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 Checks if the method Overfull \hbox (15.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 count| Overfull \hbox (9.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 seed| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/ptm/m/n/10 must be set to \T1/pcr/m/n/10 None\T1/ptm/m/n/10 , as in: \T1/pc r/m/n/10 dataset = dataset. Overfull \hbox (45.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 batch_size| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 Dis-plays the value of Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 batch_size \T1/ptm/m/n/10 pa-ram-e-ter in Overfull \hbox (33.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 repeat()| Overfull \hbox (27.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 batch()| Overfull \hbox (45.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 prefetch()| [40] [41] Overfull \vbox (345.76988pt too high) has occurred while \output is active [42] [43] [44] Chapter 11. [45] [46] Chapter 12. [47] [48] Chapter 13. [49] [50] Chapter 14. [51] [52] Chapter 15. [53] Underfull \hbox (badness 10000) in paragraph at lines 2291--2292 []\T1/pcr/m/n/10 singularity shell /data/shared/software/singularity/cbcore_lat est. (./cerebras-systems-cerebras-systems-developer-documentation.ind) [54] (./cerebras-systems-cerebras-systems-developer-documentation.aux) ) (see the transcript file for additional information){/usr/share/texlive/texmf-d ist/fonts/enc/dvips/base/8r.enc} Output written on cerebras-systems-cerebras-systems-developer-documentation.pdf (58 pages, 250279 bytes). Transcript written on cerebras-systems-cerebras-systems-developer-documentation .log. Latexmk: Index file 'cerebras-systems-cerebras-systems-developer-documentation.id' written ==> but it has an extension I do not know how to handle <== Latexmk: Index file 'cerebras-systems-cerebras-systems-developer-documentation.idx' was written Latexmk: Log file says output to 'cerebras-systems-cerebras-systems-developer-documentation.pdf' Rule 'pdflatex': File changes, etc: Changed files, or newly in use since previous run(s): 'cerebras-systems-cerebras-systems-developer-documentation.out' 'cerebras-systems-cerebras-systems-developer-documentation.toc' ------------ Run number 3 of rule 'pdflatex' ------------ ------------ Running 'pdflatex -interaction=nonstopmode -recorder --jobname="cerebras-systems-cerebras-systems-developer-documentation" "cerebrasdeveloper.tex"' ------------ Latexmk: applying rule 'pdflatex'... This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (./cerebrasdeveloper.tex LaTeX2e <2017-04-15> Babel <3.18> and hyphenation patterns for 84 language(s) loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2019/12/01 v2.3.0 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty)) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def) (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def (/usr/share/texlive/texmf-dist/tex/generic/babel/txtbabel.def)))) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/times.sty) (/usr/share/texlive/texmf-dist/tex/latex/fncychap/fncychap.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def))) (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty) (/usr/share/texlive/texmf-dist/tex/latex/tabulary/tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (/usr/share/texlive/texmf-dist/tex/latex/varwidth/varwidth.sty) (./sphinxmulticell.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty) (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty) (/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg)) (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz)) (./footnotehyper-sphinx.sty) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty) (/usr/share/texlive/texmf-dist/tex/latex/carlisle/remreset.sty) (./sphinxhighlight.sty) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty))))) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/puenc.def) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) (./sphinxmessages.sty) Writing index file cerebras-systems-cerebras-systems-developer-documentation.id x (./cerebras-systems-cerebras-systems-developer-documentation.aux) (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) *geometry* driver: auto-detecting *geometry* detected driver: pdftex (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) (./cerebras-systems-cerebras-systems-developer-documentation.out) (./cerebras-systems-cerebras-systems-developer-documentation.out) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1phv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] (./cerebras-systems-cerebras-systems-developer-documentation.toc [1]) [2] (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1ptm.fd) (/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd) [1] [2] Chapter 1. [3] [4] Chapter 2. ! Package inputenc Error: Unicode char ​ (U+200B) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.186 ...{\sphinxupquote{​support@cerebras.net}} , with \sphinxcode{\sphinx... [5] Underfull \hbox (badness 10000) in paragraph at lines 274--275 []\T1/pcr/m/n/10 NUM_WORKER_NODES=1 srun_train python run.py --mode train [6] [7] ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} ! Package inputenc Error: Unicode char █ (U+2588) (inputenc) not set up for use with LaTeX. See the inputenc package documentation for explanation. Type H for immediate help. ... l.405 ...}:02s, \PYG{l+m}{1}.23s/stages\PYG{o}{]} [8] Chapter 3. [9] [10] Chapter 4. [11] [12 <./cs1-execution-model.png>] Chapter 5. [13] [14] Chapter 6. [15] [16] Chapter 7. [17] [18] Chapter 8. [19] [20] [21] Underfull \hbox (badness 10000) in paragraph at lines 842--843 []\T1/ptm/m/n/10 These con-fig-u-ra-tions in-clude prop-er-ties such as \T1/pcr /m/n/10 cluster_spec\T1/ptm/m/n/10 , \T1/pcr/m/n/10 is_chief\T1/ptm/m/n/10 , \T 1/pcr/m/n/10 master\T1/ptm/m/n/10 , (/usr/share/texlive/texmf-dist/tex/latex/psnfss/ts1pcr.fd) [22] [23] [24] Underfull \hbox (badness 10000) in paragraph at lines 1005--1006 []\T1/pcr/m/n/10 [Unsupported TensorFlow] Detected unsupported eval_metric_ops in CS-1 Underfull \hbox (badness 10000) in paragraph at lines 1030--1031 []\T1/pcr/m/n/10 dataset = dataset.shuffle(1000).repeat().batch(batch_size, [25] Underfull \hbox (badness 10000) in paragraph at lines 1074--1075 []\T1/pcr/m/n/10 dataset = dataset.shuffle(1000).repeat().batch(batch_size, Underfull \hbox (badness 10000) in paragraph at lines 1082--1083 []\T1/pcr/m/n/10 [Unsupported TensorFlow] Inconsistent batch sizes detected. To ensure Underfull \hbox (badness 10000) in paragraph at lines 1082--1083 \T1/pcr/m/n/10 a fixed batch size across all steps, set \TS1/pcr/m/n/10 `\T1/pc r/m/n/10 drop_remainder=True\TS1/pcr/m/n/10 ` \T1/pcr/m/n/10 when [26] [27] [28] [29] [30] [31] [32] Chapter 9. [33] [34] Underfull \hbox (badness 10000) in paragraph at lines 1592--1593 []\T1/pcr/m/n/10 est = CerebrasEstimator(model_fn, params, config=config, model _dir="./out", [35] [36] [37] [38] Chapter 10. [39] Overfull \hbox (0.56348pt too wide) in paragraph at lines 1906--1906 []\T1/phv/m/n/10 An- Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/phv/m/n/10 a- Overfull \hbox (5.96362pt too wide) in paragraph at lines 1906--1906 \T1/phv/m/n/10 lyzer Overfull \hbox (13.14355pt too wide) in paragraph at lines 1906--1906 \T1/phv/m/n/10 Check Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/phv/m/n/10 in Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/phv/m/n/10 in- Overfull \hbox (12.80319pt too wide) in paragraph at lines 1906--1906 \T1/phv/m/n/10 put_fn| Overfull \hbox (51.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 buffer_size| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 The value found for Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 buffer_size \T1/ptm/m/n/10 ar-gu-ment. Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/ptm/m/n/10 See \T1/pcr/m/n/10 TFRecordDataset\T1/ptm/m/n/10 , Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 TextLineDataset \T1/ptm/m/n/10 and Overfull \hbox (19.37885pt too wide) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 FixedLengthRecordDatasetV2 Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/ptm/m/n/10 the \T1/pcr/m/n/10 dataset.prefetch()\T1/ptm/m/n/10 . Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 For \T1/pcr/m/n/10 dataset.prefetch() \T1/ptm/m/n/10 if not se t to \T1/pcr/m/n/10 tf.data. Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 experimental.AUTOTUNE\T1/ptm/m/n/10 , then rec-om-mends the Overfull \hbox (93.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 num_parallel_calls| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 Checks if Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 num_parallel_calls \T1/ptm/m/n/10 is Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 AUTOTUNE\T1/ptm/m/n/10 . If set to some-thing other than \T1/pcr /m/n/10 tf. Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 data.experimental.AUTOTUNE\T1/ptm/m/n/10 , then sug-gests set- Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/ptm/m/n/10 ting to \T1/pcr/m/n/10 tf.data.experimental.AUTOTUNE\T1/ptm/m/n/ 10 , as: Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 dataset = dataset.interleave(map_func, Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 num_parallel_calls=tf.data.experimental. Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 num_parallel_calls=tf.data.experimental. Overfull \hbox (9.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 size| Overfull \hbox (69.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 drop_remainder| Overfull \hbox (45.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 flat_map()| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 Checks if the method Overfull \hbox (15.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 count| Overfull \hbox (9.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 seed| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/ptm/m/n/10 must be set to \T1/pcr/m/n/10 None\T1/ptm/m/n/10 , as in: \T1/pc r/m/n/10 dataset = dataset. Overfull \hbox (45.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 batch_size| Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 []\T1/ptm/m/n/10 Dis-plays the value of Underfull \hbox (badness 10000) in paragraph at lines 1906--1906 \T1/pcr/m/n/10 batch_size \T1/ptm/m/n/10 pa-ram-e-ter in Overfull \hbox (33.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 repeat()| Overfull \hbox (27.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 batch()| Overfull \hbox (45.00366pt too wide) in paragraph at lines 1906--1906 []\T1/pcr/m/n/10 prefetch()| [40] [41] Overfull \vbox (345.76988pt too high) has occurred while \output is active [42] [43] [44] Chapter 11. [45] [46] Chapter 12. [47] [48] Chapter 13. [49] [50] Chapter 14. [51] [52] Chapter 15. [53] Underfull \hbox (badness 10000) in paragraph at lines 2291--2292 []\T1/pcr/m/n/10 singularity shell /data/shared/software/singularity/cbcore_lat est. (./cerebras-systems-cerebras-systems-developer-documentation.ind) [54] (./cerebras-systems-cerebras-systems-developer-documentation.aux) ) (see the transcript file for additional information){/usr/share/texlive/texmf-d ist/fonts/enc/dvips/base/8r.enc} Output written on cerebras-systems-cerebras-systems-developer-documentation.pdf (58 pages, 250279 bytes). Transcript written on cerebras-systems-cerebras-systems-developer-documentation .log. Latexmk: Index file 'cerebras-systems-cerebras-systems-developer-documentation.id' written ==> but it has an extension I do not know how to handle <== Latexmk: Index file 'cerebras-systems-cerebras-systems-developer-documentation.idx' was written Latexmk: Log file says output to 'cerebras-systems-cerebras-systems-developer-documentation.pdf' Collected error summary (may duplicate other messages): pdflatex: Command for 'pdflatex' gave return code 256 Latexmk: Errors, in force_mode: so I tried finishing targets [rtd-command-info] start-time: 2021-01-15T23:49:23.241464Z, end-time: 2021-01-15T23:49:23.296878Z, duration: 0, exit-code: 0 mv -f /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/checkouts/latest/external/source/_build/latex/cerebras-systems-cerebras-systems-developer-documentation.pdf /home/docs/checkouts/readthedocs.org/user_builds/cerebras-systems-cerebras-systems-developer-documentation/artifacts/latest/sphinx_pdf/cerebras-systems-cerebras-systems-developer-documentation.pdf