Read the Docs build information
Build id: 1320792
Project: quantify-quantify-scheduler
Version: main
Commit: 295ed154476d97ab832255505d527fa06d833fda
Date: 2023-02-28T10:09:54.391164Z
State: cancelled
Success: False


[rtd-command-info] start-time: 2023-02-28T10:15:10.053757Z, end-time: 2023-02-28T10:15:15.108206Z, duration: 5, exit-code: 0
git clone --no-single-branch --depth 50 git@gitlab.com:quantify-os/quantify-scheduler.git .
Cloning into '.'...
Warning: Permanently added 'gitlab.com,172.65.251.78' (ECDSA) to the list of known hosts.

[rtd-command-info] start-time: 2023-02-28T10:15:15.354519Z, end-time: 2023-02-28T10:15:15.638763Z, duration: 0, exit-code: 0
git checkout --force origin/main
Note: switching to 'origin/main'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:

  git switch -c <new-branch-name>

Or undo this operation with:

  git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 295ed154 revert to default changelog merge strategy

[rtd-command-info] start-time: 2023-02-28T10:15:16.042976Z, end-time: 2023-02-28T10:15:16.141125Z, duration: 0, exit-code: 0
git clean -d -f -f


[rtd-command-info] start-time: 2023-02-28T10:15:17.642794Z, end-time: 2023-02-28T10:15:27.561727Z, duration: 9, exit-code: 0
python3.8 -mvirtualenv $READTHEDOCS_VIRTUALENV_PATH
Using base prefix '/home/docs/.pyenv/versions/3.8.6'
New python executable in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/bin/python3.8
Also creating executable in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/bin/python
Installing setuptools, pip, wheel...
done.

[rtd-command-info] start-time: 2023-02-28T10:15:27.838137Z, end-time: 2023-02-28T10:15:30.406966Z, duration: 2, exit-code: 0
python -m pip install --upgrade --no-cache-dir pip setuptools<58.3.0
Requirement already satisfied: pip in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (23.0.1)
Collecting setuptools<58.3.0
  Downloading setuptools-58.2.0-py3-none-any.whl (946 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 946.1/946.1 kB 22.0 MB/s eta 0:00:00
Installing collected packages: setuptools
  Attempting uninstall: setuptools
    Found existing installation: setuptools 67.4.0
    Uninstalling setuptools-67.4.0:
      Successfully uninstalled setuptools-67.4.0
Successfully installed setuptools-58.2.0

[rtd-command-info] start-time: 2023-02-28T10:15:30.594693Z, end-time: 2023-02-28T10:15:39.832022Z, duration: 9, exit-code: 0
python -m pip install --upgrade --no-cache-dir pillow mock==1.0.1 alabaster>=0.7,<0.8,!=0.7.5 commonmark==0.9.1 recommonmark==0.5.0 sphinx<2 sphinx-rtd-theme<0.5 readthedocs-sphinx-ext<2.3 jinja2<3.1.0
Collecting pillow
  Downloading Pillow-9.4.0-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (3.3 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.3/3.3 MB 49.5 MB/s eta 0:00:00
Collecting mock==1.0.1
  Downloading mock-1.0.1.zip (861 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 861.9/861.9 kB 86.0 MB/s eta 0:00:00
  Preparing metadata (setup.py): started
  Preparing metadata (setup.py): finished with status 'done'
Collecting alabaster!=0.7.5,<0.8,>=0.7
  Downloading alabaster-0.7.13-py3-none-any.whl (13 kB)
Collecting commonmark==0.9.1
  Downloading commonmark-0.9.1-py2.py3-none-any.whl (51 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 51.1/51.1 kB 134.7 MB/s eta 0:00:00
Collecting recommonmark==0.5.0
  Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB)
Collecting sphinx<2
  Downloading Sphinx-1.8.6-py2.py3-none-any.whl (3.1 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 192.5 MB/s eta 0:00:00
Collecting sphinx-rtd-theme<0.5
  Downloading sphinx_rtd_theme-0.4.3-py2.py3-none-any.whl (6.4 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.4/6.4 MB 69.9 MB/s eta 0:00:00
Collecting readthedocs-sphinx-ext<2.3
  Downloading readthedocs_sphinx_ext-2.2.0-py2.py3-none-any.whl (11 kB)
Collecting jinja2<3.1.0
  Downloading Jinja2-3.0.3-py3-none-any.whl (133 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.6/133.6 kB 228.3 MB/s eta 0:00:00
Collecting docutils>=0.11
  Downloading docutils-0.19-py3-none-any.whl (570 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 570.5/570.5 kB 185.1 MB/s eta 0:00:00
Collecting packaging
  Downloading packaging-23.0-py3-none-any.whl (42 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 42.7/42.7 kB 169.0 MB/s eta 0:00:00
Collecting babel!=2.0,>=1.3
  Downloading Babel-2.12.0-py3-none-any.whl (10.1 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.1/10.1 MB 145.7 MB/s eta 0:00:00
Collecting Pygments>=2.0
  Downloading Pygments-2.14.0-py3-none-any.whl (1.1 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 188.4 MB/s eta 0:00:00
Collecting requests>=2.0.0
  Downloading requests-2.28.2-py3-none-any.whl (62 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.8/62.8 kB 137.2 MB/s eta 0:00:00
Collecting sphinxcontrib-websupport
  Downloading sphinxcontrib_websupport-1.2.4-py2.py3-none-any.whl (39 kB)
Collecting snowballstemmer>=1.1
  Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl (93 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.0/93.0 kB 155.7 MB/s eta 0:00:00
Collecting six>=1.5
  Downloading six-1.16.0-py2.py3-none-any.whl (11 kB)
Collecting imagesize
  Downloading imagesize-1.4.1-py2.py3-none-any.whl (8.8 kB)
Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from sphinx<2) (58.2.0)
Collecting docutils>=0.11
  Downloading docutils-0.17.1-py2.py3-none-any.whl (575 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 575.5/575.5 kB 199.3 MB/s eta 0:00:00
Collecting MarkupSafe>=2.0
  Downloading MarkupSafe-2.1.2-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (25 kB)
Collecting pytz>=2015.7
  Downloading pytz-2022.7.1-py2.py3-none-any.whl (499 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 499.4/499.4 kB 280.0 MB/s eta 0:00:00
Collecting certifi>=2017.4.17
  Downloading certifi-2022.12.7-py3-none-any.whl (155 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 155.3/155.3 kB 258.6 MB/s eta 0:00:00
Collecting idna<4,>=2.5
  Downloading idna-3.4-py3-none-any.whl (61 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.5/61.5 kB 224.8 MB/s eta 0:00:00
Collecting charset-normalizer<4,>=2
  Downloading charset_normalizer-3.0.1-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (195 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 195.4/195.4 kB 177.7 MB/s eta 0:00:00
Collecting urllib3<1.27,>=1.21.1
  Downloading urllib3-1.26.14-py2.py3-none-any.whl (140 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 140.6/140.6 kB 128.3 MB/s eta 0:00:00
Collecting sphinxcontrib-serializinghtml
  Downloading sphinxcontrib_serializinghtml-1.1.5-py2.py3-none-any.whl (94 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 94.0/94.0 kB 143.5 MB/s eta 0:00:00
Building wheels for collected packages: mock
  Building wheel for mock (setup.py): started
  Building wheel for mock (setup.py): finished with status 'done'
  Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23772 sha256=3e492656a536638bd363576bac1140af9c940303a4e055aaa1b31df9c019a000
  Stored in directory: /tmp/pip-ephem-wheel-cache-w1sfc2kg/wheels/41/7c/21/90057f91c6ead7c77a90c52d6e85ca48bf82d8b0d3f8dfbb65
Successfully built mock
Installing collected packages: snowballstemmer, pytz, mock, commonmark, charset-normalizer, urllib3, sphinxcontrib-serializinghtml, six, Pygments, pillow, packaging, MarkupSafe, imagesize, idna, docutils, certifi, babel, alabaster, sphinxcontrib-websupport, requests, jinja2, sphinx, readthedocs-sphinx-ext, sphinx-rtd-theme, recommonmark
Successfully installed MarkupSafe-2.1.2 Pygments-2.14.0 alabaster-0.7.13 babel-2.12.0 certifi-2022.12.7 charset-normalizer-3.0.1 commonmark-0.9.1 docutils-0.17.1 idna-3.4 imagesize-1.4.1 jinja2-3.0.3 mock-1.0.1 packaging-23.0 pillow-9.4.0 pytz-2022.7.1 readthedocs-sphinx-ext-2.2.0 recommonmark-0.5.0 requests-2.28.2 six-1.16.0 snowballstemmer-2.2.0 sphinx-1.8.6 sphinx-rtd-theme-0.4.3 sphinxcontrib-serializinghtml-1.1.5 sphinxcontrib-websupport-1.2.4 urllib3-1.26.14

[rtd-command-info] start-time: 2023-02-28T10:15:40.145463Z, end-time: 2023-02-28T10:17:16.857647Z, duration: 96, exit-code: 0
python -m pip install --upgrade --upgrade-strategy eager --no-cache-dir .[docs]
Processing /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/checkouts/main
  Installing build dependencies: started
  Installing build dependencies: finished with status 'done'
  Getting requirements to build wheel: started
  Getting requirements to build wheel: finished with status 'done'
  Installing backend dependencies: started
  Installing backend dependencies: finished with status 'done'
  Preparing metadata (pyproject.toml): started
  Preparing metadata (pyproject.toml): finished with status 'done'
Collecting zhinst-toolkit==0.1.5
  Downloading zhinst-toolkit-0.1.5.tar.gz (1.7 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.7/1.7 MB 34.0 MB/s eta 0:00:00
  Preparing metadata (setup.py): started
  Preparing metadata (setup.py): finished with status 'done'
Collecting orjson
  Downloading orjson-3.8.6-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (271 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 271.2/271.2 kB 156.9 MB/s eta 0:00:00
Collecting pyqtgraph==0.12.4
  Downloading pyqtgraph-0.12.4-py3-none-any.whl (995 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 995.8/995.8 kB 154.7 MB/s eta 0:00:00
Collecting plotly
  Downloading plotly-5.13.1-py2.py3-none-any.whl (15.2 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 15.2/15.2 MB 112.2 MB/s eta 0:00:00
Collecting numpy
  Downloading numpy-1.24.2-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (17.3 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 17.3/17.3 MB 112.7 MB/s eta 0:00:00
Collecting matplotlib
  Downloading matplotlib-3.7.0-cp38-cp38-manylinux_2_12_x86_64.manylinux2010_x86_64.whl (9.2 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 9.2/9.2 MB 88.0 MB/s eta 0:00:00
Collecting rich[jupyter]
  Downloading rich-13.3.1-py3-none-any.whl (239 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 239.0/239.0 kB 176.6 MB/s eta 0:00:00
Collecting dataclasses-json
  Downloading dataclasses_json-0.5.7-py3-none-any.whl (25 kB)
Collecting columnar
  Downloading Columnar-1.4.1-py3-none-any.whl (11 kB)
Collecting scipy
  Downloading scipy-1.10.1-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (34.5 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 34.5/34.5 MB 173.4 MB/s eta 0:00:00
Collecting quantify-core>=0.6.5
  Downloading quantify_core-0.7.0-py3-none-any.whl (124 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 124.8/124.8 kB 243.4 MB/s eta 0:00:00
Collecting pandas
  Downloading pandas-1.5.3-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (12.2 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 12.2/12.2 MB 155.3 MB/s eta 0:00:00
Collecting xxhash
  Downloading xxhash-3.2.0-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (213 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 213.0/213.0 kB 257.9 MB/s eta 0:00:00
Collecting zhinst==21.8.20515
  Downloading zhinst-21.8.20515-cp38-cp38-manylinux1_x86_64.whl (7.7 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 7.7/7.7 MB 182.3 MB/s eta 0:00:00
Collecting qblox-instruments==0.8
  Downloading qblox_instruments-0.8.0.tar.gz (1.5 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.5/1.5 MB 212.2 MB/s eta 0:00:00
  Preparing metadata (setup.py): started
  Preparing metadata (setup.py): finished with status 'done'
Collecting pathvalidate
  Downloading pathvalidate-2.5.2-py3-none-any.whl (20 kB)
Collecting qcodes>=0.32.0
  Downloading qcodes-0.37.0-py3-none-any.whl (1.3 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.3/1.3 MB 228.4 MB/s eta 0:00:00
Collecting fastjsonschema
  Downloading fastjsonschema-2.16.3-py3-none-any.whl (23 kB)
Requirement already satisfied: jinja2 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from quantify-scheduler==0.11.2.dev17+g295ed154) (3.0.3)
Collecting jinja2
  Downloading Jinja2-3.1.2-py3-none-any.whl (133 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.1/133.1 kB 229.8 MB/s eta 0:00:00
Collecting networkx
  Downloading networkx-3.0-py3-none-any.whl (2.0 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.0/2.0 MB 188.3 MB/s eta 0:00:00
Collecting pydantic
  Downloading pydantic-1.10.5-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (3.2 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 215.1 MB/s eta 0:00:00
Collecting zhinst-qcodes==0.1.4
  Downloading zhinst_qcodes-0.1.4-py3-none-any.whl (22 kB)
Collecting sphinx-autoapi
  Downloading sphinx_autoapi-2.0.1-py2.py3-none-any.whl (55 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 55.8/55.8 kB 184.0 MB/s eta 0:00:00
Collecting sphinx>=5.1.1
  Downloading sphinx-6.1.3-py3-none-any.whl (3.0 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.0/3.0 MB 219.3 MB/s eta 0:00:00
Collecting sphinx-togglebutton
  Downloading sphinx_togglebutton-0.3.2-py3-none-any.whl (8.2 kB)
Collecting sphinx-jsonschema
  Downloading sphinx-jsonschema-1.19.1.tar.gz (18 kB)
  Preparing metadata (setup.py): started
  Preparing metadata (setup.py): finished with status 'done'
Collecting scanpydoc
  Downloading scanpydoc-0.7.7-py3-none-any.whl (29 kB)
Collecting sphinx-autobuild
  Downloading sphinx_autobuild-2021.3.14-py3-none-any.whl (9.9 kB)
Collecting sphinx-autodoc-typehints
  Downloading sphinx_autodoc_typehints-1.22-py3-none-any.whl (17 kB)
Collecting jupytext
  Downloading jupytext-1.14.5-py3-none-any.whl (298 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 298.7/298.7 kB 259.5 MB/s eta 0:00:00
Collecting myst-nb
  Downloading myst_nb-0.17.1-py3-none-any.whl (78 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 78.6/78.6 kB 218.3 MB/s eta 0:00:00
Requirement already satisfied: sphinx-rtd-theme in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from quantify-scheduler==0.11.2.dev17+g295ed154) (0.4.3)
Collecting sphinx-rtd-theme
  Downloading sphinx_rtd_theme-1.2.0-py2.py3-none-any.whl (2.8 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.8/2.8 MB 179.2 MB/s eta 0:00:00
Collecting sphinxcontrib-bibtex
  Downloading sphinxcontrib_bibtex-2.5.0-py3-none-any.whl (39 kB)
Collecting jupyter-sphinx>=0.4.0
  Downloading jupyter_sphinx-0.4.0-py3-none-any.whl (21 kB)
Collecting ifaddr
  Downloading ifaddr-0.2.0-py3-none-any.whl (12 kB)
Collecting spirack
  Downloading spirack-0.2.4-py3-none-any.whl (46 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 46.7/46.7 kB 193.1 MB/s eta 0:00:00
Requirement already satisfied: setuptools>=40.1.0 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from zhinst-qcodes==0.1.4->quantify-scheduler==0.11.2.dev17+g295ed154) (58.2.0)
Collecting setuptools>=40.1.0
  Downloading setuptools-67.4.0-py3-none-any.whl (1.1 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 243.3 MB/s eta 0:00:00
Collecting attrs
  Downloading attrs-22.2.0-py3-none-any.whl (60 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 60.0/60.0 kB 206.7 MB/s eta 0:00:00
Collecting ipywidgets>=7.0.0
  Downloading ipywidgets-8.0.4-py3-none-any.whl (137 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 137.8/137.8 kB 253.5 MB/s eta 0:00:00
Collecting nbconvert>=5.5
  Downloading nbconvert-7.2.9-py3-none-any.whl (274 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 274.9/274.9 kB 275.7 MB/s eta 0:00:00
Collecting nbformat
  Downloading nbformat-5.7.3-py3-none-any.whl (78 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 78.1/78.1 kB 230.3 MB/s eta 0:00:00
Collecting IPython
  Downloading ipython-8.10.0-py3-none-any.whl (784 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 784.3/784.3 kB 277.4 MB/s eta 0:00:00
Collecting opencensus>=0.7.10
  Downloading opencensus-0.11.1-py2.py3-none-any.whl (128 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 128.2/128.2 kB 250.8 MB/s eta 0:00:00
Collecting xarray>=0.18.0
  Downloading xarray-2023.1.0-py3-none-any.whl (973 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 973.1/973.1 kB 243.0 MB/s eta 0:00:00
Requirement already satisfied: packaging>=20.0 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from qcodes>=0.32.0->quantify-scheduler==0.11.2.dev17+g295ed154) (23.0)
Collecting rsa>=4.7
  Downloading rsa-4.9-py3-none-any.whl (34 kB)
Requirement already satisfied: pillow>=9.0.0 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from qcodes>=0.32.0->quantify-scheduler==0.11.2.dev17+g295ed154) (9.4.0)
Collecting uncertainties>=3.1.4
  Downloading uncertainties-3.1.7-py2.py3-none-any.whl (98 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.4/98.4 kB 233.3 MB/s eta 0:00:00
Collecting ruamel.yaml!=0.16.6,>=0.16.0
  Downloading ruamel.yaml-0.17.21-py3-none-any.whl (109 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 109.5/109.5 kB 232.1 MB/s eta 0:00:00
Collecting typing-extensions>=4.0.0
  Downloading typing_extensions-4.5.0-py3-none-any.whl (27 kB)
Collecting opencensus-ext-azure<2.0.0,>=1.0.4
  Downloading opencensus_ext_azure-1.1.8-py2.py3-none-any.whl (42 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 43.0/43.0 kB 184.3 MB/s eta 0:00:00
Collecting websockets>=9.0
  Downloading websockets-10.4-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (106 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 107.0/107.0 kB 230.7 MB/s eta 0:00:00
Collecting jsonschema>=3.0.0
  Downloading jsonschema-4.17.3-py3-none-any.whl (90 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.4/90.4 kB 236.7 MB/s eta 0:00:00
Collecting tabulate>=0.8.0
  Downloading tabulate-0.9.0-py3-none-any.whl (35 kB)
Collecting versioningit>=2.0.1
  Downloading versioningit-2.2.0-py3-none-any.whl (33 kB)
Collecting h5py>=3.0.0
  Downloading h5py-3.8.0-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (4.7 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.7/4.7 MB 197.4 MB/s eta 0:00:00
Collecting pyvisa<1.14.0,>=1.11.0
  Downloading PyVISA-1.13.0-py3-none-any.whl (175 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 175.7/175.7 kB 248.6 MB/s eta 0:00:00
Collecting lazy-loader>=0.1
  Downloading lazy_loader-0.1-py3-none-any.whl (8.6 kB)
Collecting h5netcdf!=0.14.0,>=0.10.0
  Downloading h5netcdf-1.1.0-py2.py3-none-any.whl (26 kB)
Collecting broadbean>=0.9.1
  Downloading broadbean-0.11.0-py3-none-any.whl (48 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 48.4/48.4 kB 128.9 MB/s eta 0:00:00
Collecting tqdm>=4.32.2
  Downloading tqdm-4.64.1-py2.py3-none-any.whl (78 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 78.5/78.5 kB 213.1 MB/s eta 0:00:00
Collecting importlib-resources>=2.0.0
  Downloading importlib_resources-5.12.0-py3-none-any.whl (36 kB)
Collecting importlib-metadata>=4.4
  Downloading importlib_metadata-6.0.0-py3-none-any.whl (21 kB)
Collecting wrapt>=1.10.4
  Downloading wrapt-1.15.0-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (81 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 81.5/81.5 kB 230.5 MB/s eta 0:00:00
Collecting cycler>=0.10
  Downloading cycler-0.11.0-py3-none-any.whl (6.4 kB)
Collecting python-dateutil>=2.7
  Downloading python_dateutil-2.8.2-py2.py3-none-any.whl (247 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 247.7/247.7 kB 252.1 MB/s eta 0:00:00
Collecting contourpy>=1.0.1
  Downloading contourpy-1.0.7-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (300 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 300.0/300.0 kB 268.9 MB/s eta 0:00:00
Collecting pyparsing>=2.3.1
  Downloading pyparsing-3.0.9-py3-none-any.whl (98 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.3/98.3 kB 233.6 MB/s eta 0:00:00
Collecting kiwisolver>=1.0.1
  Downloading kiwisolver-1.4.4-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.whl (1.2 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 227.5 MB/s eta 0:00:00
Collecting fonttools>=4.22.0
  Downloading fonttools-4.38.0-py3-none-any.whl (965 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 965.4/965.4 kB 235.4 MB/s eta 0:00:00
Requirement already satisfied: pytz>=2020.1 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from pandas->quantify-scheduler==0.11.2.dev17+g295ed154) (2022.7.1)
Collecting filelock
  Downloading filelock-3.9.0-py3-none-any.whl (9.7 kB)
Collecting adaptive
  Downloading adaptive-0.15.1-py3-none-any.whl (122 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 122.9/122.9 kB 234.9 MB/s eta 0:00:00
Collecting pyqt5>5.15.2
  Downloading PyQt5-5.15.9-cp37-abi3-manylinux_2_17_x86_64.whl (8.4 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 8.4/8.4 MB 174.7 MB/s eta 0:00:00
Collecting lmfit>=1.0.3
  Downloading lmfit-1.1.0-py3-none-any.whl (90 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.4/90.4 kB 231.2 MB/s eta 0:00:00
Collecting dill
  Downloading dill-0.3.6-py3-none-any.whl (110 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 110.5/110.5 kB 241.0 MB/s eta 0:00:00
Collecting pendulum
  Downloading pendulum-2.1.2-cp38-cp38-manylinux1_x86_64.whl (155 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 155.7/155.7 kB 248.4 MB/s eta 0:00:00
Collecting appnope
  Downloading appnope-0.1.3-py2.py3-none-any.whl (4.4 kB)
Collecting methodtools
  Downloading methodtools-0.4.7.tar.gz (3.6 kB)
  Preparing metadata (setup.py): started
  Preparing metadata (setup.py): finished with status 'done'
Collecting sphinxcontrib-qthelp
  Downloading sphinxcontrib_qthelp-1.0.3-py2.py3-none-any.whl (90 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.6/90.6 kB 215.3 MB/s eta 0:00:00
Collecting sphinxcontrib-htmlhelp>=2.0.0
  Downloading sphinxcontrib_htmlhelp-2.0.1-py3-none-any.whl (99 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 99.8/99.8 kB 240.3 MB/s eta 0:00:00
Requirement already satisfied: babel>=2.9 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from sphinx>=5.1.1->quantify-scheduler==0.11.2.dev17+g295ed154) (2.12.0)
Requirement already satisfied: imagesize>=1.3 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from sphinx>=5.1.1->quantify-scheduler==0.11.2.dev17+g295ed154) (1.4.1)
Requirement already satisfied: snowballstemmer>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from sphinx>=5.1.1->quantify-scheduler==0.11.2.dev17+g295ed154) (2.2.0)
Requirement already satisfied: requests>=2.25.0 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from sphinx>=5.1.1->quantify-scheduler==0.11.2.dev17+g295ed154) (2.28.2)
Collecting docutils<0.20,>=0.18
  Downloading docutils-0.19-py3-none-any.whl (570 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 570.5/570.5 kB 179.2 MB/s eta 0:00:00
Collecting sphinxcontrib-applehelp
  Downloading sphinxcontrib_applehelp-1.0.4-py3-none-any.whl (120 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 120.6/120.6 kB 162.0 MB/s eta 0:00:00
Collecting sphinxcontrib-devhelp
  Downloading sphinxcontrib_devhelp-1.0.2-py2.py3-none-any.whl (84 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 84.7/84.7 kB 141.8 MB/s eta 0:00:00
Requirement already satisfied: Pygments>=2.13 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from sphinx>=5.1.1->quantify-scheduler==0.11.2.dev17+g295ed154) (2.14.0)
Collecting sphinxcontrib-jsmath
  Downloading sphinxcontrib_jsmath-1.0.1-py2.py3-none-any.whl (5.1 kB)
Requirement already satisfied: sphinxcontrib-serializinghtml>=1.1.5 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from sphinx>=5.1.1->quantify-scheduler==0.11.2.dev17+g295ed154) (1.1.5)
Requirement already satisfied: alabaster<0.8,>=0.7 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from sphinx>=5.1.1->quantify-scheduler==0.11.2.dev17+g295ed154) (0.7.13)
Requirement already satisfied: MarkupSafe>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from jinja2->quantify-scheduler==0.11.2.dev17+g295ed154) (2.1.2)
Collecting wcwidth
  Downloading wcwidth-0.2.6-py2.py3-none-any.whl (29 kB)
Collecting toolz
  Downloading toolz-0.12.0-py3-none-any.whl (55 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 55.8/55.8 kB 166.9 MB/s eta 0:00:00
Collecting marshmallow<4.0.0,>=3.3.0
  Downloading marshmallow-3.19.0-py3-none-any.whl (49 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 49.1/49.1 kB 133.3 MB/s eta 0:00:00
Collecting marshmallow-enum<2.0.0,>=1.5.1
  Downloading marshmallow_enum-1.5.1-py2.py3-none-any.whl (4.2 kB)
Collecting typing-inspect>=0.4.0
  Downloading typing_inspect-0.8.0-py3-none-any.whl (8.7 kB)
Collecting pyyaml
  Downloading PyYAML-6.0-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl (701 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 701.2/701.2 kB 197.2 MB/s eta 0:00:00
Collecting markdown-it-py<3.0.0,>=1.0.0
  Downloading markdown_it_py-2.2.0-py3-none-any.whl (84 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 84.5/84.5 kB 230.0 MB/s eta 0:00:00
Collecting mdit-py-plugins
  Downloading mdit_py_plugins-0.3.4-py3-none-any.whl (52 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 52.1/52.1 kB 204.2 MB/s eta 0:00:00
Collecting toml
  Downloading toml-0.10.2-py2.py3-none-any.whl (16 kB)
Collecting nbclient
  Downloading nbclient-0.7.2-py3-none-any.whl (71 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 72.0/72.0 kB 216.2 MB/s eta 0:00:00
Collecting jupyter-cache~=0.5.0
  Downloading jupyter_cache-0.5.0-py3-none-any.whl (34 kB)
Collecting sphinx>=5.1.1
  Downloading sphinx-5.3.0-py3-none-any.whl (3.2 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 156.6 MB/s eta 0:00:00
Collecting ipykernel
  Downloading ipykernel-6.21.2-py3-none-any.whl (149 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 149.7/149.7 kB 248.7 MB/s eta 0:00:00
Collecting myst-parser~=0.18.0
  Downloading myst_parser-0.18.1-py3-none-any.whl (58 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 58.2/58.2 kB 211.7 MB/s eta 0:00:00
Collecting tenacity>=6.2.0
  Downloading tenacity-8.2.1-py3-none-any.whl (24 kB)
Collecting get_version
  Downloading get_version-3.5.4-py3-none-any.whl (18 kB)
Collecting astroid>=2.7
  Downloading astroid-2.14.2-py3-none-any.whl (273 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 273.8/273.8 kB 254.3 MB/s eta 0:00:00
Collecting unidecode
  Downloading Unidecode-1.3.6-py3-none-any.whl (235 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 235.9/235.9 kB 170.4 MB/s eta 0:00:00
Collecting colorama
  Downloading colorama-0.4.6-py2.py3-none-any.whl (25 kB)
Collecting livereload
  Downloading livereload-2.6.3-py2.py3-none-any.whl (24 kB)
Collecting jsonpointer
  Downloading jsonpointer-2.3-py2.py3-none-any.whl (7.8 kB)
Collecting docutils<0.20,>=0.18
  Downloading docutils-0.18.1-py2.py3-none-any.whl (570 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 570.0/570.0 kB 159.4 MB/s eta 0:00:00
Collecting sphinxcontrib-jquery!=3.0.0,>=2.0.0
  Downloading sphinxcontrib_jquery-2.0.0-py3-none-any.whl (3.2 kB)
Requirement already satisfied: wheel in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from sphinx-togglebutton->quantify-scheduler==0.11.2.dev17+g295ed154) (0.38.4)
Collecting pybtex>=0.24
  Downloading pybtex-0.24.0-py2.py3-none-any.whl (561 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 561.4/561.4 kB 276.2 MB/s eta 0:00:00
Collecting pybtex-docutils>=1.0.0
  Downloading pybtex_docutils-1.0.2-py3-none-any.whl (6.3 kB)
Collecting lazy-object-proxy>=1.4.0
  Downloading lazy_object_proxy-1.9.0-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (61 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.4/61.4 kB 216.2 MB/s eta 0:00:00
Collecting schema
  Downloading schema-0.7.5-py2.py3-none-any.whl (17 kB)
Collecting zipp>=0.5
  Downloading zipp-3.15.0-py3-none-any.whl (6.8 kB)
Collecting pickleshare
  Downloading pickleshare-0.7.5-py2.py3-none-any.whl (6.9 kB)
Collecting backcall
  Downloading backcall-0.2.0-py2.py3-none-any.whl (11 kB)
Collecting matplotlib-inline
  Downloading matplotlib_inline-0.1.6-py3-none-any.whl (9.4 kB)
Collecting decorator
  Downloading decorator-5.1.1-py3-none-any.whl (9.1 kB)
Collecting jedi>=0.16
  Downloading jedi-0.18.2-py2.py3-none-any.whl (1.6 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.6/1.6 MB 192.8 MB/s eta 0:00:00
Collecting traitlets>=5
  Downloading traitlets-5.9.0-py3-none-any.whl (117 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 117.4/117.4 kB 249.3 MB/s eta 0:00:00
Collecting stack-data
  Downloading stack_data-0.6.2-py3-none-any.whl (24 kB)
Collecting pexpect>4.3
  Downloading pexpect-4.8.0-py2.py3-none-any.whl (59 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 59.0/59.0 kB 224.6 MB/s eta 0:00:00
Collecting prompt-toolkit<3.1.0,>=3.0.30
  Downloading prompt_toolkit-3.0.38-py3-none-any.whl (385 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 385.8/385.8 kB 262.6 MB/s eta 0:00:00
Collecting widgetsnbextension~=4.0
  Downloading widgetsnbextension-4.0.5-py3-none-any.whl (2.0 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.0/2.0 MB 215.3 MB/s eta 0:00:00
Collecting jupyterlab-widgets~=3.0
  Downloading jupyterlab_widgets-3.0.5-py3-none-any.whl (384 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 384.3/384.3 kB 264.4 MB/s eta 0:00:00
Collecting tornado>=6.1
  Downloading tornado-6.2-cp37-abi3-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (423 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 424.0/424.0 kB 271.3 MB/s eta 0:00:00
Collecting debugpy>=1.6.5
  Downloading debugpy-1.6.6-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (3.1 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 140.3 MB/s eta 0:00:00
Collecting jupyter-core!=5.0.*,>=4.12
  Downloading jupyter_core-5.2.0-py3-none-any.whl (94 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 94.3/94.3 kB 135.6 MB/s eta 0:00:00
Collecting jupyter-client>=6.1.12
  Downloading jupyter_client-8.0.3-py3-none-any.whl (102 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 102.7/102.7 kB 234.1 MB/s eta 0:00:00
Collecting nest-asyncio
  Downloading nest_asyncio-1.5.6-py3-none-any.whl (5.2 kB)
Collecting pyzmq>=20
  Downloading pyzmq-25.0.0-cp38-cp38-manylinux_2_12_x86_64.manylinux2010_x86_64.whl (1.1 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 232.5 MB/s eta 0:00:00
Collecting psutil
  Downloading psutil-5.9.4-cp36-abi3-manylinux_2_12_x86_64.manylinux2010_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (280 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 280.2/280.2 kB 119.5 MB/s eta 0:00:00
Collecting comm>=0.1.1
  Downloading comm-0.1.2-py3-none-any.whl (6.5 kB)
Collecting pkgutil-resolve-name>=1.3.10
  Downloading pkgutil_resolve_name-1.3.10-py3-none-any.whl (4.7 kB)
Collecting pyrsistent!=0.17.0,!=0.17.1,!=0.17.2,>=0.14.0
  Downloading pyrsistent-0.19.3-py3-none-any.whl (57 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 57.5/57.5 kB 174.1 MB/s eta 0:00:00
Collecting click
  Downloading click-8.1.3-py3-none-any.whl (96 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 96.6/96.6 kB 227.0 MB/s eta 0:00:00
Collecting sqlalchemy<1.5,>=1.3.12
  Downloading SQLAlchemy-1.4.46-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (1.6 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.6/1.6 MB 188.3 MB/s eta 0:00:00
Collecting nbclient
  Downloading nbclient-0.5.13-py3-none-any.whl (70 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 70.6/70.6 kB 225.1 MB/s eta 0:00:00
Collecting asteval>=0.9.28
  Downloading asteval-0.9.29-py3-none-any.whl (18 kB)
Collecting mdurl~=0.1
  Downloading mdurl-0.1.2-py3-none-any.whl (10.0 kB)
Collecting pandocfilters>=1.4.1
  Downloading pandocfilters-1.5.0-py2.py3-none-any.whl (8.7 kB)
Collecting bleach
  Downloading bleach-6.0.0-py3-none-any.whl (162 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 162.5/162.5 kB 248.0 MB/s eta 0:00:00
Collecting beautifulsoup4
  Downloading beautifulsoup4-4.11.2-py3-none-any.whl (129 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 129.4/129.4 kB 75.7 MB/s eta 0:00:00
Collecting defusedxml
  Downloading defusedxml-0.7.1-py2.py3-none-any.whl (25 kB)
Collecting jupyterlab-pygments
  Downloading jupyterlab_pygments-0.2.2-py2.py3-none-any.whl (21 kB)
Collecting tinycss2
  Downloading tinycss2-1.2.1-py3-none-any.whl (21 kB)
Collecting mistune<3,>=2.0.3
  Downloading mistune-2.0.5-py2.py3-none-any.whl (24 kB)
Collecting opencensus-context>=0.1.3
  Downloading opencensus_context-0.1.3-py2.py3-none-any.whl (5.1 kB)
Collecting google-api-core<3.0.0,>=1.0.0
  Downloading google_api_core-2.11.0-py3-none-any.whl (120 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 120.3/120.3 kB 239.6 MB/s eta 0:00:00
Collecting azure-identity<2.0.0,>=1.5.0
  Downloading azure_identity-1.12.0-py3-none-any.whl (135 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 135.5/135.5 kB 237.8 MB/s eta 0:00:00
Collecting azure-core<2.0.0,>=1.12.0
  Downloading azure_core-1.26.3-py3-none-any.whl (174 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 174.5/174.5 kB 236.4 MB/s eta 0:00:00
Collecting latexcodec>=1.0.4
  Downloading latexcodec-2.0.1-py2.py3-none-any.whl (18 kB)
Requirement already satisfied: six in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from pybtex>=0.24->sphinxcontrib-bibtex->quantify-scheduler==0.11.2.dev17+g295ed154) (1.16.0)
Collecting PyQt5-sip<13,>=12.11
  Downloading PyQt5_sip-12.11.1-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.whl (361 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 361.8/361.8 kB 121.7 MB/s eta 0:00:00
Collecting PyQt5-Qt5>=5.15.2
  Downloading PyQt5_Qt5-5.15.2-py3-none-manylinux2014_x86_64.whl (59.9 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 59.9/59.9 MB 164.4 MB/s eta 0:00:00
Requirement already satisfied: charset-normalizer<4,>=2 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from requests>=2.25.0->sphinx>=5.1.1->quantify-scheduler==0.11.2.dev17+g295ed154) (3.0.1)
Requirement already satisfied: certifi>=2017.4.17 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from requests>=2.25.0->sphinx>=5.1.1->quantify-scheduler==0.11.2.dev17+g295ed154) (2022.12.7)
Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from requests>=2.25.0->sphinx>=5.1.1->quantify-scheduler==0.11.2.dev17+g295ed154) (1.26.14)
Requirement already satisfied: idna<4,>=2.5 in /home/docs/checkouts/readthedocs.org/user_builds/quantify-quantify-scheduler/envs/main/lib/python3.8/site-packages (from requests>=2.25.0->sphinx>=5.1.1->quantify-scheduler==0.11.2.dev17+g295ed154) (3.4)
Collecting pyasn1>=0.1.3
  Downloading pyasn1-0.4.8-py2.py3-none-any.whl (77 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 77.1/77.1 kB 224.2 MB/s eta 0:00:00
Collecting ruamel.yaml.clib>=0.2.6
  Downloading ruamel.yaml.clib-0.2.7-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.manylinux_2_24_x86_64.whl (555 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 555.3/555.3 kB 268.0 MB/s eta 0:00:00
Collecting mypy-extensions>=0.3.0
  Downloading mypy_extensions-1.0.0-py3-none-any.whl (4.7 kB)
Collecting future
  Downloading future-0.18.3.tar.gz (840 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 840.9/840.9 kB 137.4 MB/s eta 0:00:00
  Preparing metadata (setup.py): started
  Preparing metadata (setup.py): finished with status 'done'
Collecting tomli<3.0,>=1.2
  Downloading tomli-2.0.1-py3-none-any.whl (12 kB)
Collecting cloudpickle
  Downloading cloudpickle-2.2.1-py3-none-any.whl (25 kB)
Collecting loky>=2.9
  Downloading loky-3.3.0-py3-none-any.whl (53 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 53.6/53.6 kB 203.4 MB/s eta 0:00:00
Collecting sortedcollections>=1.1
  Downloading sortedcollections-2.1.0-py3-none-any.whl (9.5 kB)
Collecting sortedcontainers>=2.0
  Downloading sortedcontainers-2.4.0-py2.py3-none-any.whl (29 kB)
Collecting dunamai
  Downloading dunamai-1.16.0-py3-none-any.whl (23 kB)
Collecting wirerope>=0.4.7
  Downloading wirerope-0.4.7.tar.gz (8.5 kB)
  Installing build dependencies: started
  Installing build dependencies: finished with status 'done'
  Getting requirements to build wheel: started
  Getting requirements to build wheel: finished with status 'done'
  Preparing metadata (pyproject.toml): started
  Preparing metadata (pyproject.toml): finished with status 'done'
Collecting pytzdata>=2020.1
  Downloading pytzdata-2020.1-py2.py3-none-any.whl (489 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 490.0/490.0 kB 168.7 MB/s eta 0:00:00
Collecting pyserial
  Downloading pyserial-3.5-py2.py3-none-any.whl (90 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.6/90.6 kB 236.9 MB/s eta 0:00:00
Collecting cryptography>=2.5
  Downloading cryptography-39.0.1-cp36-abi3-manylinux_2_24_x86_64.whl (4.1 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.1/4.1 MB 155.8 MB/s eta 0:00:00
Collecting msal<2.0.0,>=1.12.0
  Downloading msal-1.21.0-py2.py3-none-any.whl (89 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 89.9/89.9 kB 214.8 MB/s eta 0:00:00
Collecting msal-extensions<2.0.0,>=0.3.0
  Downloading msal_extensions-1.0.0-py2.py3-none-any.whl (19 kB)
Collecting protobuf!=3.20.0,!=3.20.1,!=4.21.0,!=4.21.1,!=4.21.2,!=4.21.3,!=4.21.4,!=4.21.5,<5.0.0dev,>=3.19.5
  Downloading protobuf-4.22.0-cp37-abi3-manylinux2014_x86_64.whl (302 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 302.4/302.4 kB 266.6 MB/s eta 0:00:00
Collecting googleapis-common-protos<2.0dev,>=1.56.2
  Downloading googleapis_common_protos-1.58.0-py2.py3-none-any.whl (223 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 223.0/223.0 kB 255.7 MB/s eta 0:00:00
Collecting google-auth<3.0dev,>=2.14.1
  Downloading google_auth-2.16.1-py2.py3-none-any.whl (177 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 177.2/177.2 kB 258.2 MB/s eta 0:00:00
Collecting parso<0.9.0,>=0.8.0
  Downloading parso-0.8.3-py2.py3-none-any.whl (100 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100.8/100.8 kB 240.2 MB/s eta 0:00:00
Collecting platformdirs>=2.5
  Downloading platformdirs-3.0.0-py3-none-any.whl (14 kB)
Collecting ptyprocess>=0.5
  Downloading ptyprocess-0.7.0-py2.py3-none-any.whl (13 kB)
Collecting greenlet!=0.4.17
  Downloading greenlet-2.0.2-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (618 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 618.5/618.5 kB 268.7 MB/s eta 0:00:00
Collecting soupsieve>1.2
  Downloading soupsieve-2.4-py3-none-any.whl (37 kB)
Collecting webencodings
  Downloading webencodings-0.5.1-py2.py3-none-any.whl (11 kB)
Collecting contextlib2>=0.5.5
  Downloading contextlib2-21.6.0-py2.py3-none-any.whl (13 kB)
Collecting pure-eval
  Downloading pure_eval-0.2.2-py3-none-any.whl (11 kB)
Collecting asttokens>=2.1.0
  Downloading asttokens-2.2.1-py2.py3-none-any.whl (26 kB)
Collecting executing>=1.2.0
  Downloading executing-1.2.0-py2.py3-none-any.whl (24 kB)
Collecting cffi>=1.12
  Downloading cffi-1.15.1-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (442 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 442.7/442.7 kB 261.1 MB/s eta 0:00:00
Collecting pyasn1-modules>=0.2.1
  Downloading pyasn1_modules-0.2.8-py2.py3-none-any.whl (155 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 155.3/155.3 kB 250.2 MB/s eta 0:00:00
Collecting cachetools<6.0,>=2.0.0
  Downloading cachetools-5.3.0-py3-none-any.whl (9.3 kB)
Collecting PyJWT[crypto]<3,>=1.0.0
  Downloading PyJWT-2.6.0-py3-none-any.whl (20 kB)
Collecting portalocker<3,>=1.0
  Downloading portalocker-2.7.0-py2.py3-none-any.whl (15 kB)
Collecting pycparser
  Downloading pycparser-2.21-py2.py3-none-any.whl (118 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 118.7/118.7 kB 242.4 MB/s eta 0:00:00
Building wheels for collected packages: qblox-instruments, zhinst-toolkit, quantify-scheduler, sphinx-jsonschema, methodtools, wirerope, future
  Building wheel for qblox-instruments (setup.py): started
  Building wheel for qblox-instruments (setup.py): finished with status 'done'
  Created wheel for qblox-instruments: filename=qblox_instruments-0.8.0-py3-none-any.whl size=1496747 sha256=3047faafe96cdc2c15d44cf88e572c8385f419f0c89a8d1d657b3de717f6c75f
  Stored in directory: /tmp/pip-ephem-wheel-cache-s6n32z2b/wheels/88/25/13/17854086653c26f456beeeb0726868c38c6bac8c27e3620ca9
  Building wheel for zhinst-toolkit (setup.py): started
  Building wheel for zhinst-toolkit (setup.py): finished with status 'done'
  Created wheel for zhinst-toolkit: filename=zhinst_toolkit-0.1.5-py3-none-any.whl size=202040 sha256=e9855fa8283d61e9262fd940b26dfb73f9cda7c20b7fa36f0b2774ea1338c1e1
  Stored in directory: /tmp/pip-ephem-wheel-cache-s6n32z2b/wheels/4a/53/71/6c78435ed5c361179bcf117e4b75f06a99bf714dd23a29d478
  Building wheel for quantify-scheduler (pyproject.toml): started
  Building wheel for quantify-scheduler (pyproject.toml): finished with status 'done'
  Created wheel for quantify-scheduler: filename=quantify_scheduler-0.11.2.dev17+g295ed154-py3-none-any.whl size=270459 sha256=b14c13eb63b523de40d501b81fe2f09dc9c49629e398fc53e3d43c35492d28d9
  Stored in directory: /tmp/pip-ephem-wheel-cache-s6n32z2b/wheels/12/fe/db/8d999100057736e34521b07f5fa5734123f1dd65717b0e93ee
  Building wheel for sphinx-jsonschema (setup.py): started
  Building wheel for sphinx-jsonschema (setup.py): finished with status 'done'
  Created wheel for sphinx-jsonschema: filename=sphinx_jsonschema-1.19.1-py3-none-any.whl size=15414 sha256=4d657478e85b9211121f1bf96da0fd52780575ac478eb6cdf4a99a334c13aa33
  Stored in directory: /tmp/pip-ephem-wheel-cache-s6n32z2b/wheels/40/ab/cc/445e746d632c3b4788a325ba5fd2ae780d6214ad9d0f7318a8
  Building wheel for methodtools (setup.py): started
  Building wheel for methodtools (setup.py): finished with status 'done'
  Created wheel for methodtools: filename=methodtools-0.4.7-py3-none-any.whl size=3985 sha256=3f23df68377baf00041684f1a769ba99017f3b1c575ae84f4d7ae74778cd3d7b
  Stored in directory: /tmp/pip-ephem-wheel-cache-s6n32z2b/wheels/1a/a5/85/729293bc52c9a1be64202c2127a3131e4beb4dc13c0dc08316
  Building wheel for wirerope (pyproject.toml): started
  Building wheel for wirerope (pyproject.toml): finished with status 'done'
  Created wheel for wirerope: filename=wirerope-0.4.7-py3-none-any.whl size=8976 sha256=8177910b50eef11bebd3a3fc8c1d5b00520dd647a2965a8b6c9ec8e024acc52e
  Stored in directory: /tmp/pip-ephem-wheel-cache-s6n32z2b/wheels/2a/51/1b/a0029832b7f11c635dc789903caa152a7617aae25764e877b6
  Building wheel for future (setup.py): started
  Building wheel for future (setup.py): finished with status 'done'
  Created wheel for future: filename=future-0.18.3-py3-none-any.whl size=492036 sha256=411410b845c645a9d16112874d84d86960069ecf2d5e316b42aceac523c17b86
  Stored in directory: /tmp/pip-ephem-wheel-cache-s6n32z2b/wheels/a0/0b/ee/e6994fadb42c1354dcccb139b0bf2795271bddfe6253ccdf11
Successfully built qblox-instruments zhinst-toolkit quantify-scheduler sphinx-jsonschema methodtools wirerope future
Installing collected packages: webencodings, wcwidth, sortedcontainers, pyserial, PyQt5-Qt5, pyasn1, pure-eval, ptyprocess, pickleshare, opencensus-context, mistune, ifaddr, fastjsonschema, executing, backcall, appnope, zipp, xxhash, wrapt, wirerope, widgetsnbextension, websockets, unidecode, typing-extensions, traitlets, tqdm, tornado, toolz, tomli, toml, tinycss2, tenacity, tabulate, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, soupsieve, sortedcollections, setuptools, ruamel.yaml.clib, rsa, pyzmq, pyyaml, pytzdata, python-dateutil, pyrsistent, PyQt5-sip, pyparsing, PyJWT, pycparser, pyasn1-modules, psutil, protobuf, prompt-toolkit, portalocker, platformdirs, pkgutil-resolve-name, pexpect, pathvalidate, parso, pandocfilters, orjson, numpy, networkx, nest-asyncio, mypy-extensions, mdurl, marshmallow, lazy-object-proxy, lazy-loader, latexcodec, kiwisolver, jupyterlab-widgets, jupyterlab-pygments, jsonpointer, jinja2, greenlet, future, fonttools, filelock, dunamai, docutils, dill, defusedxml, decorator, debugpy, cycler, contextlib2, colorama, cloudpickle, click, cachetools, bleach, attrs, asttokens, asteval, zhinst, uncertainties, typing-inspect, stack-data, sqlalchemy, spirack, sphinxcontrib-jquery, sphinx-jsonschema, scipy, schema, ruamel.yaml, pyvisa, pyqtgraph, pyqt5, pydantic, pybtex, plotly, pendulum, pandas, methodtools, matplotlib-inline, marshmallow-enum, markdown-it-py, loky, livereload, jupyter-core, jedi, importlib-resources, importlib-metadata, h5py, googleapis-common-protos, google-auth, get_version, contourpy, comm, columnar, cffi, beautifulsoup4, azure-core, astroid, zhinst-toolkit, xarray, versioningit, sphinx, rich, pybtex-docutils, mdit-py-plugins, matplotlib, lmfit, jupyter-client, jsonschema, IPython, h5netcdf, google-api-core, dataclasses-json, cryptography, adaptive, sphinxcontrib-bibtex, sphinx-togglebutton, sphinx-rtd-theme, sphinx-autodoc-typehints, sphinx-autobuild, sphinx-autoapi, scanpydoc, opencensus, nbformat, myst-parser, ipykernel, broadbean, nbclient, msal, jupytext, ipywidgets, nbconvert, msal-extensions, jupyter-cache, myst-nb, jupyter-sphinx, azure-identity, opencensus-ext-azure, qcodes, zhinst-qcodes, quantify-core, qblox-instruments, quantify-scheduler
  Attempting uninstall: setuptools
    Found existing installation: setuptools 58.2.0
    Uninstalling setuptools-58.2.0:
      Successfully uninstalled setuptools-58.2.0
  Attempting uninstall: jinja2
    Found existing installation: Jinja2 3.0.3
    Uninstalling Jinja2-3.0.3:
      Successfully uninstalled Jinja2-3.0.3
  Attempting uninstall: docutils
    Found existing installation: docutils 0.17.1
    Uninstalling docutils-0.17.1:
      Successfully uninstalled docutils-0.17.1
  Attempting uninstall: sphinx
    Found existing installation: Sphinx 1.8.6
    Uninstalling Sphinx-1.8.6:
      Successfully uninstalled Sphinx-1.8.6
  Attempting uninstall: sphinx-rtd-theme
    Found existing installation: sphinx-rtd-theme 0.4.3
    Uninstalling sphinx-rtd-theme-0.4.3:
      Successfully uninstalled sphinx-rtd-theme-0.4.3
Successfully installed IPython-8.10.0 PyJWT-2.6.0 PyQt5-Qt5-5.15.2 PyQt5-sip-12.11.1 adaptive-0.15.1 appnope-0.1.3 asteval-0.9.29 astroid-2.14.2 asttokens-2.2.1 attrs-22.2.0 azure-core-1.26.3 azure-identity-1.12.0 backcall-0.2.0 beautifulsoup4-4.11.2 bleach-6.0.0 broadbean-0.11.0 cachetools-5.3.0 cffi-1.15.1 click-8.1.3 cloudpickle-2.2.1 colorama-0.4.6 columnar-1.4.1 comm-0.1.2 contextlib2-21.6.0 contourpy-1.0.7 cryptography-39.0.1 cycler-0.11.0 dataclasses-json-0.5.7 debugpy-1.6.6 decorator-5.1.1 defusedxml-0.7.1 dill-0.3.6 docutils-0.18.1 dunamai-1.16.0 executing-1.2.0 fastjsonschema-2.16.3 filelock-3.9.0 fonttools-4.38.0 future-0.18.3 get_version-3.5.4 google-api-core-2.11.0 google-auth-2.16.1 googleapis-common-protos-1.58.0 greenlet-2.0.2 h5netcdf-1.1.0 h5py-3.8.0 ifaddr-0.2.0 importlib-metadata-6.0.0 importlib-resources-5.12.0 ipykernel-6.21.2 ipywidgets-8.0.4 jedi-0.18.2 jinja2-3.1.2 jsonpointer-2.3 jsonschema-4.17.3 jupyter-cache-0.5.0 jupyter-client-8.0.3 jupyter-core-5.2.0 jupyter-sphinx-0.4.0 jupyterlab-pygments-0.2.2 jupyterlab-widgets-3.0.5 jupytext-1.14.5 kiwisolver-1.4.4 latexcodec-2.0.1 lazy-loader-0.1 lazy-object-proxy-1.9.0 livereload-2.6.3 lmfit-1.1.0 loky-3.3.0 markdown-it-py-2.2.0 marshmallow-3.19.0 marshmallow-enum-1.5.1 matplotlib-3.7.0 matplotlib-inline-0.1.6 mdit-py-plugins-0.3.4 mdurl-0.1.2 methodtools-0.4.7 mistune-2.0.5 msal-1.21.0 msal-extensions-1.0.0 mypy-extensions-1.0.0 myst-nb-0.17.1 myst-parser-0.18.1 nbclient-0.5.13 nbconvert-7.2.9 nbformat-5.7.3 nest-asyncio-1.5.6 networkx-3.0 numpy-1.24.2 opencensus-0.11.1 opencensus-context-0.1.3 opencensus-ext-azure-1.1.8 orjson-3.8.6 pandas-1.5.3 pandocfilters-1.5.0 parso-0.8.3 pathvalidate-2.5.2 pendulum-2.1.2 pexpect-4.8.0 pickleshare-0.7.5 pkgutil-resolve-name-1.3.10 platformdirs-3.0.0 plotly-5.13.1 portalocker-2.7.0 prompt-toolkit-3.0.38 protobuf-4.22.0 psutil-5.9.4 ptyprocess-0.7.0 pure-eval-0.2.2 pyasn1-0.4.8 pyasn1-modules-0.2.8 pybtex-0.24.0 pybtex-docutils-1.0.2 pycparser-2.21 pydantic-1.10.5 pyparsing-3.0.9 pyqt5-5.15.9 pyqtgraph-0.12.4 pyrsistent-0.19.3 pyserial-3.5 python-dateutil-2.8.2 pytzdata-2020.1 pyvisa-1.13.0 pyyaml-6.0 pyzmq-25.0.0 qblox-instruments-0.8.0 qcodes-0.37.0 quantify-core-0.7.0 quantify-scheduler-0.11.2.dev17+g295ed154 rich-13.3.1 rsa-4.9 ruamel.yaml-0.17.21 ruamel.yaml.clib-0.2.7 scanpydoc-0.7.7 schema-0.7.5 scipy-1.10.1 setuptools-67.4.0 sortedcollections-2.1.0 sortedcontainers-2.4.0 soupsieve-2.4 sphinx-5.3.0 sphinx-autoapi-2.0.1 sphinx-autobuild-2021.3.14 sphinx-autodoc-typehints-1.22 sphinx-jsonschema-1.19.1 sphinx-rtd-theme-1.2.0 sphinx-togglebutton-0.3.2 sphinxcontrib-applehelp-1.0.4 sphinxcontrib-bibtex-2.5.0 sphinxcontrib-devhelp-1.0.2 sphinxcontrib-htmlhelp-2.0.1 sphinxcontrib-jquery-2.0.0 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-qthelp-1.0.3 spirack-0.2.4 sqlalchemy-1.4.46 stack-data-0.6.2 tabulate-0.9.0 tenacity-8.2.1 tinycss2-1.2.1 toml-0.10.2 tomli-2.0.1 toolz-0.12.0 tornado-6.2 tqdm-4.64.1 traitlets-5.9.0 typing-extensions-4.5.0 typing-inspect-0.8.0 uncertainties-3.1.7 unidecode-1.3.6 versioningit-2.2.0 wcwidth-0.2.6 webencodings-0.5.1 websockets-10.4 widgetsnbextension-4.0.5 wirerope-0.4.7 wrapt-1.15.0 xarray-2023.1.0 xxhash-3.2.0 zhinst-21.8.20515 zhinst-qcodes-0.1.4 zhinst-toolkit-0.1.5 zipp-3.15.0

[rtd-command-info] start-time: 2023-02-28T10:17:18.791962Z, end-time: 2023-02-28T10:17:18.860878Z, duration: 0, exit-code: 0
cat docs/conf.py
#!/usr/bin/env python
# pylint: disable=wrong-import-position, unused-import, invalid-name
#
# Quantify documentation build configuration file, created by
# sphinx-quickstart on Fri Jun  9 13:47:02 2017.
#
# This file is execfile()d with the current directory set to its
# containing dir.
#
# Note that not all possible configuration values are present in this
# autogenerated file.
#
# All configuration values have a default; values that are commented out
# serve to show the default.

# If extensions (or modules to document with autodoc) are in another
# directory, add these directories to sys.path here. If the directory is
# relative to the documentation root, use os.path.abspath to make it
# absolute, like shown here.
#
import os
import sys

package_path = os.path.abspath("..")
sys.path.insert(0, package_path)


# -- General configuration ---------------------------------------------
# pylint: disable=invalid-name

# If your documentation needs a minimal Sphinx version, state it here.
#
# needs_sphinx = '1.0'

# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
extensions = [
    "myst_nb",
    "sphinx.ext.autodoc",  # auto document docstrings
    "sphinx.ext.napoleon",  # autodoc understands numpy docstrings
    # load after napoleon, improved compatibility with type hints annotations
    "sphinx_autodoc_typehints",
    "sphinx.ext.viewcode",
    "sphinx.ext.intersphinx",
    "sphinx.ext.autosectionlabel",
    "sphinx-jsonschema",
    "sphinx_rtd_theme",
    "sphinx.ext.mathjax",
    "sphinx.ext.todo",
    "jupyter_sphinx",
    "sphinx_togglebutton",
    # fancy type hints in docs and
    # solves the same issue as "sphinx_automodapi.smart_resolver"
    # however the smart_resolver seems to fail for external packages like `zhinst`
    "scanpydoc.elegant_typehints",
    "sphinxcontrib.bibtex",
    "autoapi.extension",
]


# Add any paths that contain templates here, relative to this directory.
templates_path = ["_templates"]

intersphinx_mapping = {
    "python": ("https://docs.python.org/3", None),
    "qcodes": ("https://qcodes.github.io/Qcodes/", None),
    "xarray": ("https://xarray.pydata.org/en/stable/", None),
    "numpy": ("https://numpy.org/doc/stable/", None),
    "pandas": ("https://pandas.pydata.org/pandas-docs/dev/", None),
    "matplotlib": ("https://matplotlib.org/stable/", None),
    "lmfit": ("https://lmfit.github.io/lmfit-py/", None),
    "dateutil": ("https://dateutil.readthedocs.io/en/stable/", None),
    "fastjsonschema": ("https://horejsek.github.io/python-fastjsonschema/", None),
    "quantify-core": (
        "https://quantify-quantify-core.readthedocs-hosted.com/en/latest/",
        None,
    ),
    "scipy": ("https://docs.scipy.org/doc/scipy/reference/", None),
    "qblox-instruments": (
        "https://qblox-qblox-instruments.readthedocs-hosted.com/en/master/",
        None,
    ),
    "zhinst-toolkit": ("https://docs.zhinst.com/zhinst-toolkit/en/latest/", None),
    "zhinst-qcodes": ("https://docs.zhinst.com/zhinst-qcodes/en/v0.1/", None),
}

bibtex_bibfiles = ["refs.bib"]
bibtex_reference_style = "author_year"


# The suffix(es) of source filenames.
# You can specify multiple suffix as a list of string:
#
# source_suffix = ['.rst', '.md']
source_suffix = [".rst", ".md"]

# The master toctree document.
master_doc = "index"

# General information about the project.
project = "Quantify-Scheduler"
copyright = "2020-2023, Qblox & Orange Quantum Systems"
author = "The Quantify consortium"


# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
#
# This is also used if you do content translation via gettext catalogs.
# Usually you set "language" from the command line for these cases.
language = "en"

# List of patterns, relative to source directory, that match files and
# directories to ignore when looking for source files.
# This patterns also effect to html_static_path and html_extra_path
exclude_patterns = ["_build", "Thumbs.db", ".DS_Store"]

# The name of the Pygments (syntax highlighting) style to use.
pygments_style = "sphinx"

# If true, `todo` and `todoList` produce output, else they produce nothing.
todo_include_todos = True

# Document __init__ docstring together with class doctring (when __init__ is present)
napoleon_include_init_with_doc = True
# NB the line below could be used for a similar result
# BUT the line below ALWAYS includes the __init__ docstring even if it come from the
# parent class which is undesired for analysis subclasses, for example.
# autoclass_content = "both"


# -- Options for HTML output -------------------------------------------

# The theme to use for HTML and HTML Help pages.  See the documentation for
# a list of builtin themes.
#
html_theme = "sphinx_rtd_theme"


# The name of an image file (relative to this directory) to place at the top
# of the sidebar.

# the white text fits better with the current sphinx theme
# both files are in the repository
# html_logo = "images/QUANTIFY-LOGO.svg"
html_logo = "images/QUANTIFY-LOGO-WHITE-TEXT.svg"

# The name of an image file (within the static path) to use as favicon of the
# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
# pixels large.
html_favicon = "images/QUANTIFY-FAVICON_16.png"


# Theme options are theme-specific and customize the look and feel of a
# theme further.  For a list of options available for each theme, see the
# documentation.
#
# html_theme_options = {}

# Add any paths that contain custom static files (such as style sheets) here,
# relative to this directory. They are copied after the builtin static files,
# so a file named "default.css" will overwrite the builtin "default.css".
html_static_path = ["_static"]
html_css_files = [
    "quantify_scheduler.css",
]


# -- Options for HTMLHelp output ---------------------------------------

# Output file base name for HTML help builder.
htmlhelp_basename = "quantifydoc"

html_context = {
    "display_gitlab": True,
    "gitlab_user": "quantify-os",
    "gitlab_repo": "quantify-scheduler",
    "gitlab_version": "main/docs/",
}

# -- Options for LaTeX output ------------------------------------------

latex_elements = {
    # The paper size ('letterpaper' or 'a4paper').
    #
    # 'papersize': 'letterpaper',
    # The font size ('10pt', '11pt' or '12pt').
    #
    # 'pointsize': '10pt',
    # Additional stuff for the LaTeX preamble.
    #
    # 'preamble': '',
    # Latex figure (float) alignment
    #
    # 'figure_align': 'htbp',
}

# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title, author, documentclass
# [howto, manual, or own class]).
latex_documents = [
    (
        master_doc,
        "quantify_scheduler.tex",
        "quantify Documentation",
        "Quantify Consortium ",
        "manual",
    ),
]


# -- Options for manual page output ------------------------------------

# One entry per manual page. List of tuples
# (source start file, name, description, authors, manual section).
man_pages = [(master_doc, "quantify", "quantify Documentation", [author], 1)]


# -- Options for Texinfo output ----------------------------------------

# Grouping the document tree into Texinfo files. List of tuples
# (source start file, target name, title, author,
#  dir menu entry, description, category)
texinfo_documents = [
    (
        master_doc,
        "Quantify-Scheduler",
        "Quantify-Scheduler Documentation",
        author,
        "Quantify-Scheduler",
        "One line description of project.",
        "Miscellaneous",
    ),
]

# -- Other Options -----------------------------------------------------
# see https://sphinx-autoapi.readthedocs.io/en/latest/reference/config.html

autoapi_type = "python"
autoapi_generate_api_docs = True
autoapi_dirs = ["../quantify_scheduler"]
ignore_module_all = True
autoapi_add_toctree_entry = False
autoapi_options = [
    "members",
    "undoc-members",
    "private-members",
    "show-inheritance",
    "show-module-summary",
    # Including `important-members` displays the description of class aliases in the
    # docs, however, it causes sphinx to raise multiple warnings about finding
    # multiple targets for cross-references.
    # "imported-members",
]
# displays docstrings inside __init__
autoapi_python_class_content = "both"

# avoid duplicate label warning even when manual label has been used;
suppress_warnings = [
    "autosectionlabel.*",
    "mystnb.unknown_mime_type",
]

# avoid ugly very long module_a.module_b.module_c.module_d.module_e.module_d.MyClass
# display in docs (very ugly when overflowing the html page width)
# NB the side bar and the link of these objects already includes the full path
add_module_names = False

# Used by scanpydoc.elegant_typehints to correctly link to references to python objects
# that have a mismatch between the python modules real location vs how they are imported
# and documented. These overrides are necessary to fix "reference target not found" when
# these classes are used as type annotations.
# NB Use this only for external packages. Do not do this in quantify and cause problems
# to internal and external developers.
qualname_overrides = {
    # "<true path to module>" : "<API path>"
    "matplotlib.axes._axes.Axes": "matplotlib.axes.Axes",
    "zhinst.qcodes.uhfqa.UHFQA": "zhinst.qcodes.UHFQA",
    "zhinst.qcodes.hdawg.HDAWG": "zhinst.qcodes.HDAWG",
}

numfig = True

autodoc_default_options = {
    "member-order": "groupwise",
    # Ignore any __all__ that might be added accidentally by inexperienced developers
    # This is done to avoid nasty complications with sphinx and its extensions and
    # plenty of "reference target not found" warnings.
    # See also qualname_overrides above, which has to be used for external packages.
    "ignore-module-all": True,
}

# For debugging the CI just add `or True` on the line below
if os.environ.get("GITLAB_CI", "false") == "true":
    print("\n[INFO] Building docs with private-members... See `conf.py` for details.\n")
    # for local build and CI force documentation to build for private members
    # this make sure the docstrings of private members are also correctly formatted, etc
    autodoc_default_options["private-members"] = True

# -- Options for auto documenting typehints ----------------------------

# Please see https://gitlab.com/quantify-os/quantify/-/issues/10 regarding

# below should be imported all "problematic" modules that might raise strange issues
# when building the docs
# e.g., to "partially initialized module", or "most likely due to a circular import"

# This is a practical solution. We tried fixing certain things upstream, e.g.:
# https://github.com/QCoDeS/Qcodes/pull/2909
# but the issues popped up again, so this is the best and easier solution so far

# qcodes imports scipy under the hood but since scipy=1.7.0 it needs to be imported
# here with typing.TYPE_CHECKING = True otherwise we run into quantify-core#
import lmfit  # related to quantify-core#218 and quantify-core#221
import marshmallow
import qcodes

# qcodes0.36.0 lazyloads h5py which causes build failures
import h5py

# Prevents a circular import warning
import tenacity

# `pydantic` fails to import automatically and leads to broken documentation,
# if not preloaded.
import pydantic

# When building the docs we need `typing.TYPE_CHECKING` to be `True` so that the
# sphinx' kernel loads the modules corresponding to the typehints and is able to
# auto document types. The modules listed above create issues when loaded with
# `typing.TYPE_CHECKING = True` so we import them beforehand to avoid nasty issues.

# It is a good practice to make use of the following construct to import modules that
# are used for type hints ONLY! the construct is the following:

# if typing.TYPE_CHECKING:
#     import my_expensive_to_import_module as my_module

# NB if you run into any circular import issue it is because you are importing module
# member directly from a module, i.e.:

# if typing.TYPE_CHECKING:
#     from my_expensive_to_import_module import BlaClass # Potential circular import

set_type_checking_flag = True  # this will run `typing.TYPE_CHECKING = True`

# The following fails the build when one of the notebooks has an execution error.
nb_execution_raise_on_error = True

# Making sure sphinx builders understand cells which include multiple mime types,
# for example linkcheck can check cells which contain html and images
nb_mime_priority_overrides = [
    ("linkcheck", "text/html", 0),
    ("linkcheck", "image/png", 40),
]

# Enable nitpicky mode - warns about all references where the target cannot be found
# https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-nitpicky

nitpicky = True  # equivalent to `-n` option in the docs Makefile
nitpick_ignore = [
    ("py:class", "quantify_scheduler.device_under_test.composite_square_edge"),
    (
        "py:class",
        "quantify_scheduler.schedules.schedule.CompiledSchedule.hardware_waveform_dict",
    ),
    (
        "py:class",
        "quantify_scheduler.schedules.schedule.CompiledSchedule.hardware_timing_table",
    ),
    ("py:class", "quantify_scheduler.helpers.schedule.AcquisitionMetadata"),
    ("py:class", "_StaircaseParameters"),
    ("py:class", "quantify_scheduler.operations.operation.Operation"),
    ("py:class", "quantify_scheduler.operations.operation.Operation.valid_pulse"),
    (
        "py:class",
        "quantify_scheduler.instrument_coordinator.instrument_coordinator.InstrumentCoordinator",
    ),
    (
        "py:class",
        "quantify_scheduler.instrument_coordinator.components.InstrumentCoordinatorComponentBase",
    ),
    ("py:class", "AcquisitionIndexing"),
    ("py:obj", "quantify_scheduler.Operation"),
    ("py:class", "quantify_scheduler.Operation"),
    ("py:obj", "quantify_scheduler.Resource"),
    ("py:class", "quantify_scheduler.Resource"),
    ("py:obj", "quantify_scheduler.structure.DataStructure"),
    ("py:obj", "quantify_scheduler.backends.SerialCompiler"),
    ("py:obj", "quantify_scheduler.schedules.heterodyne_spec_sched"),
    ("py:obj", "quantify_scheduler.schedules.nv_dark_esr_sched"),
    ("py:obj", "quantify_scheduler.schedules.two_tone_spec_sched"),
    ("py:obj", "quantify_scheduler.schedules.allxy_sched"),
    ("py:obj", "quantify_scheduler.schedules.echo_sched"),
    ("py:obj", "quantify_scheduler.schedules.rabi_pulse_sched"),
    ("py:obj", "quantify_scheduler.schedules.rabi_sched"),
    ("py:obj", "quantify_scheduler.schedules.ramsey_sched"),
    ("py:obj", "quantify_scheduler.schedules.readout_calibration_sched"),
    ("py:obj", "quantify_scheduler.schedules.t1_sched"),
    ("py:obj", "quantify_scheduler.schedules.trace_schedule"),
    ("py:obj", "quantify_scheduler.schedules.trace_schedule_circuit_layer"),
    ("py:obj", "quantify_scheduler.schedules.two_tone_trace_schedule"),
]  # Tuple[str, str], ignore certain warnings

nitpick_ignore_regex = [
    ("py:class", r"numpy.*"),
    ("py:class", r"plotly.*"),
    ("py:.*", r"orjson.*"),
    ("py:.*", r"pydantic.*"),
    ("py:.*", r"qcodes.*"),
    ("py:class", r"Ellipsis.*"),
    ("py:class", r"Parameter.*"),
    ("py:.*", r"dataclasses_json.*"),
    (".*", r".*Schedule"),
    ("py:class", r"qblox_instruments.*"),
    ("py:class", r"matplotlib.*"),
]

with open("nitpick-exceptions.txt", encoding="utf-8") as nitpick_exceptions:
    for line in nitpick_exceptions:
        if line.strip() == "" or line.startswith("#"):
            continue
        dtype, target = line.split(None, 1)
        target = target.strip()
        nitpick_ignore.append((dtype, target))




###########################################################################
#          auto-created readthedocs.org specific configuration            #
###########################################################################


#
# The following code was added during an automated build on readthedocs.org
# It is auto created and injected for every build. The result is based on the
# conf.py.tmpl file found in the readthedocs.org codebase:
# https://github.com/rtfd/readthedocs.org/blob/main/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl
#
# Note: this file shouldn't rely on extra dependencies.

import importlib
import sys
import os.path

# Borrowed from six.
PY3 = sys.version_info[0] == 3
string_types = str if PY3 else basestring

from sphinx import version_info

# Get suffix for proper linking to GitHub
# This is deprecated in Sphinx 1.3+,
# as each page can have its own suffix
if globals().get('source_suffix', False):
    if isinstance(source_suffix, string_types):
        SUFFIX = source_suffix
    elif isinstance(source_suffix, (list, tuple)):
        # Sphinx >= 1.3 supports list/tuple to define multiple suffixes
        SUFFIX = source_suffix[0]
    elif isinstance(source_suffix, dict):
        # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes
        SUFFIX = list(source_suffix.keys())[0]  # make a ``list()`` for py2/py3 compatibility
    else:
        # default to .rst
        SUFFIX = '.rst'
else:
    SUFFIX = '.rst'

# Add RTD Static Path. Add to the end because it overwrites previous files.
if not 'html_static_path' in globals():
    html_static_path = []
if os.path.exists('_static'):
    html_static_path.append('_static')

# Add RTD Theme only if they aren't overriding it already
using_rtd_theme = (
    (
        'html_theme' in globals() and
        html_theme in ['default'] and
        # Allow people to bail with a hack of having an html_style
        'html_style' not in globals()
    ) or 'html_theme' not in globals()
)
if using_rtd_theme:
    html_theme = 'sphinx_rtd_theme'
    html_style = None
    html_theme_options = {}


# This following legacy behavior will gradually be sliced out until its deprecated and removed.
# Skipped for Sphinx 6+
# Skipped by internal Feature flag SKIP_SPHINX_HTML_THEME_PATH
# Skipped by all new projects since SKIP_SPHINX_HTML_THEME_PATH's introduction (jan 2023)
if (
        using_rtd_theme
        and version_info < (6,0)
        and not False
    ):
    theme = importlib.import_module('sphinx_rtd_theme')
    if 'html_theme_path' in globals():
        html_theme_path.append(theme.get_html_theme_path())
    else:
        html_theme_path = [theme.get_html_theme_path()]

# Define websupport2_base_url and websupport2_static_url
if globals().get('websupport2_base_url', False):
    websupport2_base_url = 'https://readthedocs.com/websupport'
    websupport2_static_url = 'https://assets.readthedocs.com/'


#Add project information to the template context.
context = {
    'using_theme': using_rtd_theme,
    'html_theme': html_theme,
    'current_version': "main",
    'version_slug': "main",
    'MEDIA_URL': "https://media.readthedocs.com/media/",
    'STATIC_URL': "https://assets.readthedocs.com/",
    'PRODUCTION_DOMAIN': "readthedocs.com",
    'proxied_static_path': "/_/static/",
    'versions': [
    ("latest", "/en/latest/"),
    ("v0.11.1", "/en/v0.11.1/"),
    ("v0.11.0", "/en/v0.11.0/"),
    ("0.10.1", "/en/0.10.1/"),
    ("0.10.0", "/en/0.10.0/"),
    ("0.9.0", "/en/0.9.0/"),
    ("0.8.0", "/en/0.8.0/"),
    ("0.7.0", "/en/0.7.0/"),
    ("0.6.0", "/en/0.6.0/"),
    ("0.5.2", "/en/0.5.2/"),
    ("0.5.1", "/en/0.5.1/"),
    ("0.5.0", "/en/0.5.0/"),
    ("0.4.0", "/en/0.4.0/"),
    ("0.3.0", "/en/0.3.0/"),
    ("0.2.0", "/en/0.2.0/"),
    ("main", "/en/main/"),
    ("0.1.0", "/en/0.1.0/"),
    ],
    'downloads': [ 
    ],
    'subprojects': [ 
    ],
    'slug': 'quantify-quantify-scheduler',
    'name': u'quantify-scheduler',
    'rtd_language': u'en',
    'programming_language': u'py',
    'canonical_url': 'https://quantify-quantify-scheduler.readthedocs-hosted.com/en/v0.11.1/',
    'analytics_code': 'None',
    'single_version': False,
    'conf_py_path': '/docs/',
    'api_host': 'https://readthedocs.com',
    'github_user': 'None',
    'proxied_api_host': '/_',
    'github_repo': 'None',
    'github_version': 'main',
    'display_github': False,
    'bitbucket_user': 'None',
    'bitbucket_repo': 'None',
    'bitbucket_version': 'main',
    'display_bitbucket': False,
    'gitlab_user': 'quantify-os',
    'gitlab_repo': 'quantify-scheduler',
    'gitlab_version': 'main',
    'display_gitlab': True,
    'READTHEDOCS': True,
    'using_theme': (html_theme == "default"),
    'new_theme': (html_theme == "sphinx_rtd_theme"),
    'source_suffix': SUFFIX,
    'ad_free': False,
    'docsearch_disabled': False,
    'user_analytics_code': '',
    'global_analytics_code': 'UA-17997319-2',
    'commit': '295ed154',
}

# For sphinx >=1.8 we can use html_baseurl to set the canonical URL.
# https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-html_baseurl
if version_info >= (1, 8):
    if not globals().get('html_baseurl'):
        html_baseurl = context['canonical_url']
    context['canonical_url'] = None





if 'html_context' in globals():
    
    html_context.update(context)
    
else:
    html_context = context

# Add custom RTD extension
if 'extensions' in globals():
    # Insert at the beginning because it can interfere
    # with other extensions.
    # See https://github.com/rtfd/readthedocs.org/pull/4054
    extensions.insert(0, "readthedocs_ext.readthedocs")
else:
    extensions = ["readthedocs_ext.readthedocs"]

# Add External version warning banner to the external version documentation
if 'branch' == 'external':
    extensions.insert(1, "readthedocs_ext.external_version_warning")
    readthedocs_vcs_url = 'None'
    readthedocs_build_url = 'https://readthedocs.com/projects/quantify-quantify-scheduler/builds/1320792/'

project_language = 'en'

# User's Sphinx configurations
language_user = globals().get('language', None)
latex_engine_user = globals().get('latex_engine', None)
latex_elements_user = globals().get('latex_elements', None)

# Remove this once xindy gets installed in Docker image and XINDYOPS
# env variable is supported
# https://github.com/rtfd/readthedocs-docker-images/pull/98
latex_use_xindy = False

chinese = any([
    language_user in ('zh_CN', 'zh_TW'),
    project_language in ('zh_CN', 'zh_TW'),
])

japanese = any([
    language_user == 'ja',
    project_language == 'ja',
])

if chinese:
    latex_engine = latex_engine_user or 'xelatex'

    latex_elements_rtd = {
        'preamble': '\\usepackage[UTF8]{ctex}\n',
    }
    latex_elements = latex_elements_user or latex_elements_rtd
elif japanese:
    latex_engine = latex_engine_user or 'platex'

# Make sure our build directory is always excluded
exclude_patterns = globals().get('exclude_patterns', [])
exclude_patterns.extend(['_build'])