Read the Docs build information Build id: 1220014 Project: continuumio-conda-build Version: stable Commit: 20b08017b9308309f8feb877493db0c09d6a91c0 Date: 2022-12-13T16:18:57.843453Z State: finished Success: True [rtd-command-info] start-time: 2022-12-13T16:18:59.873376Z, end-time: 2022-12-13T16:19:03.103011Z, duration: 3, exit-code: 0 git clone --no-single-branch --depth 50 https://github.com/conda/conda-build . Cloning into '.'... [rtd-command-info] start-time: 2022-12-13T16:19:03.291205Z, end-time: 2022-12-13T16:19:03.460483Z, duration: 0, exit-code: 0 git checkout --force 20b08017b9308309f8feb877493db0c09d6a91c0 Note: switching to '20b08017b9308309f8feb877493db0c09d6a91c0'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 20b08017 Release 3.23.3 (#4669) [rtd-command-info] start-time: 2022-12-13T16:19:03.648037Z, end-time: 2022-12-13T16:19:03.717301Z, duration: 0, exit-code: 0 git clean -d -f -f [rtd-command-info] start-time: 2022-12-13T16:19:04.731392Z, end-time: 2022-12-13T16:19:09.214769Z, duration: 4, exit-code: 0 python3.7 -mvirtualenv Using base prefix '/home/docs/.pyenv/versions/3.7.9' New python executable in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/bin/python3.7 Also creating executable in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/bin/python Installing setuptools, pip, wheel... done. [rtd-command-info] start-time: 2022-12-13T16:19:09.456263Z, end-time: 2022-12-13T16:19:11.177821Z, duration: 1, exit-code: 0 python -m pip install --upgrade --no-cache-dir pip setuptools<58.3.0 Requirement already satisfied: pip in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (22.3.1) Collecting setuptools<58.3.0 Downloading setuptools-58.2.0-py3-none-any.whl (946 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 946.1/946.1 kB 34.1 MB/s eta 0:00:00 Installing collected packages: setuptools Attempting uninstall: setuptools Found existing installation: setuptools 65.6.3 Uninstalling setuptools-65.6.3: Successfully uninstalled setuptools-65.6.3 Successfully installed setuptools-58.2.0 [rtd-command-info] start-time: 2022-12-13T16:19:11.424396Z, end-time: 2022-12-13T16:19:17.908366Z, duration: 6, exit-code: 0 python -m pip install --upgrade --no-cache-dir pillow mock==1.0.1 alabaster>=0.7,<0.8,!=0.7.5 commonmark==0.9.1 recommonmark==0.5.0 sphinx<2 sphinx-rtd-theme<0.5 readthedocs-sphinx-ext<2.3 jinja2<3.1.0 Collecting pillow Downloading Pillow-9.3.0-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (3.2 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 52.1 MB/s eta 0:00:00 Collecting mock==1.0.1 Downloading mock-1.0.1.zip (861 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 861.9/861.9 kB 242.5 MB/s eta 0:00:00 Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting alabaster!=0.7.5,<0.8,>=0.7 Downloading alabaster-0.7.12-py2.py3-none-any.whl (14 kB) Collecting commonmark==0.9.1 Downloading commonmark-0.9.1-py2.py3-none-any.whl (51 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 51.1/51.1 kB 188.2 MB/s eta 0:00:00 Collecting recommonmark==0.5.0 Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB) Collecting sphinx<2 Downloading Sphinx-1.8.6-py2.py3-none-any.whl (3.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 175.1 MB/s eta 0:00:00 Collecting sphinx-rtd-theme<0.5 Downloading sphinx_rtd_theme-0.4.3-py2.py3-none-any.whl (6.4 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.4/6.4 MB 171.4 MB/s eta 0:00:00 Collecting readthedocs-sphinx-ext<2.3 Downloading readthedocs_sphinx_ext-2.2.0-py2.py3-none-any.whl (11 kB) Collecting jinja2<3.1.0 Downloading Jinja2-3.0.3-py3-none-any.whl (133 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.6/133.6 kB 225.1 MB/s eta 0:00:00 Collecting docutils>=0.11 Downloading docutils-0.19-py3-none-any.whl (570 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 570.5/570.5 kB 246.6 MB/s eta 0:00:00 Collecting snowballstemmer>=1.1 Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl (93 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.0/93.0 kB 213.1 MB/s eta 0:00:00 Collecting imagesize Downloading imagesize-1.4.1-py2.py3-none-any.whl (8.8 kB) Collecting sphinxcontrib-websupport Downloading sphinxcontrib_websupport-1.2.4-py2.py3-none-any.whl (39 kB) Collecting docutils>=0.11 Downloading docutils-0.17.1-py2.py3-none-any.whl (575 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 575.5/575.5 kB 246.2 MB/s eta 0:00:00 Collecting Pygments>=2.0 Downloading Pygments-2.13.0-py3-none-any.whl (1.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 249.2 MB/s eta 0:00:00 Collecting six>=1.5 Downloading six-1.16.0-py2.py3-none-any.whl (11 kB) Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from sphinx<2) (58.2.0) Collecting requests>=2.0.0 Downloading requests-2.28.1-py3-none-any.whl (62 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.8/62.8 kB 192.0 MB/s eta 0:00:00 Collecting packaging Downloading packaging-22.0-py3-none-any.whl (42 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 42.6/42.6 kB 173.5 MB/s eta 0:00:00 Collecting babel!=2.0,>=1.3 Downloading Babel-2.11.0-py3-none-any.whl (9.5 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 9.5/9.5 MB 165.5 MB/s eta 0:00:00 Collecting MarkupSafe>=2.0 Downloading MarkupSafe-2.1.1-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (25 kB) Collecting pytz>=2015.7 Downloading pytz-2022.6-py2.py3-none-any.whl (498 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 498.1/498.1 kB 245.8 MB/s eta 0:00:00 Collecting urllib3<1.27,>=1.21.1 Downloading urllib3-1.26.13-py2.py3-none-any.whl (140 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 140.6/140.6 kB 213.5 MB/s eta 0:00:00 Collecting idna<4,>=2.5 Downloading idna-3.4-py3-none-any.whl (61 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.5/61.5 kB 188.5 MB/s eta 0:00:00 Collecting certifi>=2017.4.17 Downloading certifi-2022.12.7-py3-none-any.whl (155 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 155.3/155.3 kB 222.2 MB/s eta 0:00:00 Collecting charset-normalizer<3,>=2 Downloading charset_normalizer-2.1.1-py3-none-any.whl (39 kB) Collecting sphinxcontrib-serializinghtml Downloading sphinxcontrib_serializinghtml-1.1.5-py2.py3-none-any.whl (94 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 94.0/94.0 kB 192.4 MB/s eta 0:00:00 Building wheels for collected packages: mock Building wheel for mock (setup.py): started Building wheel for mock (setup.py): finished with status 'done' Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23772 sha256=a05205528070891374c2e50e6cd2c7b1835fe32e8882d4ee200e8deda8ba8b0c Stored in directory: /tmp/pip-ephem-wheel-cache-ycsnpmeb/wheels/d1/33/8e/f9d24f00cc130866aacfe7c3bc15571217e2b22cc4c4e1b443 Successfully built mock Installing collected packages: snowballstemmer, pytz, mock, commonmark, alabaster, urllib3, sphinxcontrib-serializinghtml, six, Pygments, pillow, packaging, MarkupSafe, imagesize, idna, docutils, charset-normalizer, certifi, babel, sphinxcontrib-websupport, requests, jinja2, sphinx, readthedocs-sphinx-ext, sphinx-rtd-theme, recommonmark Successfully installed MarkupSafe-2.1.1 Pygments-2.13.0 alabaster-0.7.12 babel-2.11.0 certifi-2022.12.7 charset-normalizer-2.1.1 commonmark-0.9.1 docutils-0.17.1 idna-3.4 imagesize-1.4.1 jinja2-3.0.3 mock-1.0.1 packaging-22.0 pillow-9.3.0 pytz-2022.6 readthedocs-sphinx-ext-2.2.0 recommonmark-0.5.0 requests-2.28.1 six-1.16.0 snowballstemmer-2.2.0 sphinx-1.8.6 sphinx-rtd-theme-0.4.3 sphinxcontrib-serializinghtml-1.1.5 sphinxcontrib-websupport-1.2.4 urllib3-1.26.13 [rtd-command-info] start-time: 2022-12-13T16:19:18.088723Z, end-time: 2022-12-13T16:19:30.937655Z, duration: 12, exit-code: 0 python -m pip install --exists-action=w --no-cache-dir -r docs/requirements.txt Collecting linkify-it-py==1.0.1 Downloading linkify_it_py-1.0.1-py3-none-any.whl (19 kB) Collecting myst-parser==0.15.2 Downloading myst_parser-0.15.2-py3-none-any.whl (46 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 46.3/46.3 kB 15.0 MB/s eta 0:00:00 Collecting Pillow==9.0.1 Downloading Pillow-9.0.1-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (4.3 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.3/4.3 MB 87.9 MB/s eta 0:00:00 Collecting PyYAML==5.4.1 Downloading PyYAML-5.4.1-cp37-cp37m-manylinux1_x86_64.whl (636 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 636.6/636.6 kB 248.2 MB/s eta 0:00:00 Collecting requests==2.26.0 Downloading requests-2.26.0-py2.py3-none-any.whl (62 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.3/62.3 kB 189.9 MB/s eta 0:00:00 Collecting ruamel.yaml==0.17.16 Downloading ruamel.yaml-0.17.16-py3-none-any.whl (109 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 109.0/109.0 kB 194.0 MB/s eta 0:00:00 Collecting Sphinx==4.2.0 Downloading Sphinx-4.2.0-py3-none-any.whl (3.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 185.4 MB/s eta 0:00:00 Collecting sphinx-argparse==0.3.1 Downloading sphinx_argparse-0.3.1-py2.py3-none-any.whl (12 kB) Collecting sphinx-autobuild==2021.3.14 Downloading sphinx_autobuild-2021.3.14-py3-none-any.whl (9.9 kB) Collecting sphinx-rtd-theme==1.0.0 Downloading sphinx_rtd_theme-1.0.0-py2.py3-none-any.whl (2.8 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.8/2.8 MB 188.0 MB/s eta 0:00:00 Collecting sphinx-sitemap==2.2.0 Downloading sphinx-sitemap-2.2.0.tar.gz (6.1 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting sphinxcontrib-applehelp==1.0.2 Downloading sphinxcontrib_applehelp-1.0.2-py2.py3-none-any.whl (121 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 121.2/121.2 kB 207.2 MB/s eta 0:00:00 Collecting sphinxcontrib-devhelp==1.0.2 Downloading sphinxcontrib_devhelp-1.0.2-py2.py3-none-any.whl (84 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 84.7/84.7 kB 207.6 MB/s eta 0:00:00 Collecting sphinxcontrib-htmlhelp==2.0.0 Downloading sphinxcontrib_htmlhelp-2.0.0-py2.py3-none-any.whl (100 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100.5/100.5 kB 217.7 MB/s eta 0:00:00 Collecting sphinxcontrib-jsmath==1.0.1 Downloading sphinxcontrib_jsmath-1.0.1-py2.py3-none-any.whl (5.1 kB) Collecting sphinxcontrib-plantuml==0.21 Downloading sphinxcontrib-plantuml-0.21.tar.gz (11 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting sphinxcontrib-programoutput==0.17 Downloading sphinxcontrib_programoutput-0.17-py2.py3-none-any.whl (22 kB) Collecting sphinxcontrib-qthelp==1.0.3 Downloading sphinxcontrib_qthelp-1.0.3-py2.py3-none-any.whl (90 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.6/90.6 kB 204.0 MB/s eta 0:00:00 Requirement already satisfied: sphinxcontrib-serializinghtml==1.1.5 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from -r docs/requirements.txt (line 19)) (1.1.5) Collecting pylint==2.11.1 Downloading pylint-2.11.1-py3-none-any.whl (392 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 392.1/392.1 kB 232.7 MB/s eta 0:00:00 Collecting uc-micro-py Downloading uc_micro_py-1.0.1-py3-none-any.whl (6.2 kB) Requirement already satisfied: jinja2 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from myst-parser==0.15.2->-r docs/requirements.txt (line 2)) (3.0.3) Collecting markdown-it-py<2.0.0,>=1.0.0 Downloading markdown_it_py-1.1.0-py3-none-any.whl (83 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 83.6/83.6 kB 201.1 MB/s eta 0:00:00 Requirement already satisfied: docutils<0.18,>=0.15 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from myst-parser==0.15.2->-r docs/requirements.txt (line 2)) (0.17.1) Collecting mdit-py-plugins~=0.2.8 Downloading mdit_py_plugins-0.2.8-py3-none-any.whl (41 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 41.0/41.0 kB 161.0 MB/s eta 0:00:00 Requirement already satisfied: idna<4,>=2.5 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from requests==2.26.0->-r docs/requirements.txt (line 5)) (3.4) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from requests==2.26.0->-r docs/requirements.txt (line 5)) (1.26.13) Collecting charset-normalizer~=2.0.0 Downloading charset_normalizer-2.0.12-py3-none-any.whl (39 kB) Requirement already satisfied: certifi>=2017.4.17 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from requests==2.26.0->-r docs/requirements.txt (line 5)) (2022.12.7) Collecting ruamel.yaml.clib>=0.1.2 Downloading ruamel.yaml.clib-0.2.7-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.manylinux_2_24_x86_64.whl (500 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 500.1/500.1 kB 230.4 MB/s eta 0:00:00 Requirement already satisfied: packaging in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (22.0) Requirement already satisfied: imagesize in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (1.4.1) Requirement already satisfied: alabaster<0.8,>=0.7 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (0.7.12) Requirement already satisfied: babel>=1.3 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (2.11.0) Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (58.2.0) Requirement already satisfied: Pygments>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (2.13.0) Requirement already satisfied: snowballstemmer>=1.1 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (2.2.0) Collecting livereload Downloading livereload-2.6.3.tar.gz (25 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting colorama Downloading colorama-0.4.6-py2.py3-none-any.whl (25 kB) Requirement already satisfied: six in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from sphinx-sitemap==2.2.0->-r docs/requirements.txt (line 11)) (1.16.0) Collecting typing-extensions>=3.10.0 Downloading typing_extensions-4.4.0-py3-none-any.whl (26 kB) Collecting isort<6,>=4.2.5 Downloading isort-5.11.1-py3-none-any.whl (118 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 118.5/118.5 kB 212.7 MB/s eta 0:00:00 Collecting toml>=0.7.1 Downloading toml-0.10.2-py2.py3-none-any.whl (16 kB) Collecting astroid<2.9,>=2.8.0 Downloading astroid-2.8.6-py3-none-any.whl (248 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 248.7/248.7 kB 228.2 MB/s eta 0:00:00 Collecting mccabe<0.7,>=0.6 Downloading mccabe-0.6.1-py2.py3-none-any.whl (8.6 kB) Collecting platformdirs>=2.2.0 Downloading platformdirs-2.6.0-py3-none-any.whl (14 kB) Collecting wrapt<1.14,>=1.11 Downloading wrapt-1.13.3-cp37-cp37m-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl (79 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 79.4/79.4 kB 185.6 MB/s eta 0:00:00 Collecting typed-ast<2.0,>=1.4.0 Downloading typed_ast-1.5.4-cp37-cp37m-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl (843 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 843.7/843.7 kB 238.9 MB/s eta 0:00:00 Collecting lazy-object-proxy>=1.4.0 Downloading lazy-object-proxy-1.8.0.tar.gz (41 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 41.9/41.9 kB 159.7 MB/s eta 0:00:00 Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Requirement already satisfied: pytz>=2015.7 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from babel>=1.3->Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (2022.6) Requirement already satisfied: MarkupSafe>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from jinja2->myst-parser==0.15.2->-r docs/requirements.txt (line 2)) (2.1.1) Collecting attrs<22,>=19 Downloading attrs-21.4.0-py2.py3-none-any.whl (60 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 60.6/60.6 kB 188.0 MB/s eta 0:00:00 Collecting tornado Downloading tornado-6.2-cp37-abi3-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (423 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 424.0/424.0 kB 235.8 MB/s eta 0:00:00 Building wheels for collected packages: sphinx-sitemap, sphinxcontrib-plantuml, livereload, lazy-object-proxy Building wheel for sphinx-sitemap (setup.py): started Building wheel for sphinx-sitemap (setup.py): finished with status 'done' Created wheel for sphinx-sitemap: filename=sphinx_sitemap-2.2.0-py3-none-any.whl size=6063 sha256=08e65e07e057787b030b48c68c0236a253d60971100194d8a52e691ebc3d0239 Stored in directory: /tmp/pip-ephem-wheel-cache-x4xkhac3/wheels/48/ac/05/b309189d0319bfdf2ff98ba430e231db3aa3d866eb6a8eeb34 Building wheel for sphinxcontrib-plantuml (setup.py): started Building wheel for sphinxcontrib-plantuml (setup.py): finished with status 'done' Created wheel for sphinxcontrib-plantuml: filename=sphinxcontrib_plantuml-0.21-py3-none-any.whl size=10432 sha256=ba179ff997bc8f101aacc8c4e773e57fc41a58b216e9099cbbc3fb11a0c12b24 Stored in directory: /tmp/pip-ephem-wheel-cache-x4xkhac3/wheels/17/0f/eb/dce5e0af54be50f0f760af0eecd4bab8f43f5c38e2cc3bf67d Building wheel for livereload (setup.py): started Building wheel for livereload (setup.py): finished with status 'done' Created wheel for livereload: filename=livereload-2.6.3-py2.py3-none-any.whl size=24727 sha256=b5636e768cbc1470a8f6992626c6aafdf56082af054b3a6be705e5e1dc7bbf34 Stored in directory: /tmp/pip-ephem-wheel-cache-x4xkhac3/wheels/0a/da/85/bbc4365bb71f2214c599aeeb901517e5f883c5f1988b92515f Building wheel for lazy-object-proxy (pyproject.toml): started Building wheel for lazy-object-proxy (pyproject.toml): finished with status 'done' Created wheel for lazy-object-proxy: filename=lazy_object_proxy-1.8.0-cp37-cp37m-linux_x86_64.whl size=56293 sha256=3df7f4364c56cb8a2097b45fffa7d733aa55c2da9e9f8b49d41d4aaf502d15ab Stored in directory: /tmp/pip-ephem-wheel-cache-x4xkhac3/wheels/c0/96/89/f64b1ccaf665e6d26cee18a9a7cc434c2ea609649e0436df44 Successfully built sphinx-sitemap sphinxcontrib-plantuml livereload lazy-object-proxy Installing collected packages: mccabe, wrapt, uc-micro-py, typing-extensions, typed-ast, tornado, toml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, ruamel.yaml.clib, PyYAML, platformdirs, Pillow, lazy-object-proxy, isort, colorama, charset-normalizer, attrs, ruamel.yaml, requests, markdown-it-py, livereload, linkify-it-py, astroid, Sphinx, pylint, mdit-py-plugins, sphinxcontrib-programoutput, sphinxcontrib-plantuml, sphinx-sitemap, sphinx-rtd-theme, sphinx-autobuild, sphinx-argparse, myst-parser Attempting uninstall: Pillow Found existing installation: Pillow 9.3.0 Uninstalling Pillow-9.3.0: Successfully uninstalled Pillow-9.3.0 Attempting uninstall: charset-normalizer Found existing installation: charset-normalizer 2.1.1 Uninstalling charset-normalizer-2.1.1: Successfully uninstalled charset-normalizer-2.1.1 Attempting uninstall: requests Found existing installation: requests 2.28.1 Uninstalling requests-2.28.1: Successfully uninstalled requests-2.28.1 Attempting uninstall: Sphinx Found existing installation: Sphinx 1.8.6 Uninstalling Sphinx-1.8.6: Successfully uninstalled Sphinx-1.8.6 Attempting uninstall: sphinx-rtd-theme Found existing installation: sphinx-rtd-theme 0.4.3 Uninstalling sphinx-rtd-theme-0.4.3: Successfully uninstalled sphinx-rtd-theme-0.4.3 Successfully installed Pillow-9.0.1 PyYAML-5.4.1 Sphinx-4.2.0 astroid-2.8.6 attrs-21.4.0 charset-normalizer-2.0.12 colorama-0.4.6 isort-5.11.1 lazy-object-proxy-1.8.0 linkify-it-py-1.0.1 livereload-2.6.3 markdown-it-py-1.1.0 mccabe-0.6.1 mdit-py-plugins-0.2.8 myst-parser-0.15.2 platformdirs-2.6.0 pylint-2.11.1 requests-2.26.0 ruamel.yaml-0.17.16 ruamel.yaml.clib-0.2.7 sphinx-argparse-0.3.1 sphinx-autobuild-2021.3.14 sphinx-rtd-theme-1.0.0 sphinx-sitemap-2.2.0 sphinxcontrib-applehelp-1.0.2 sphinxcontrib-devhelp-1.0.2 sphinxcontrib-htmlhelp-2.0.0 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-plantuml-0.21 sphinxcontrib-programoutput-0.17 sphinxcontrib-qthelp-1.0.3 toml-0.10.2 tornado-6.2 typed-ast-1.5.4 typing-extensions-4.4.0 uc-micro-py-1.0.1 wrapt-1.13.3 [rtd-command-info] start-time: 2022-12-13T16:19:32.951590Z, end-time: 2022-12-13T16:19:33.012994Z, duration: 0, exit-code: 0 cat docs/source/conf.py # Copyright (C) 2014 Anaconda, Inc # SPDX-License-Identifier: BSD-3-Clause # # Configuration file for the Sphinx documentation builder. # # This file does only contain a selection of the most common options. For a # full list see the documentation: # http://www.sphinx-doc.org/en/master/config # -- Path setup -------------------------------------------------------------- # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. # import os import sys sys.path.insert(0, os.path.abspath("../..")) os.chdir("../..") import versioneer # noqa: E402 version = versioneer.get_versions()["version"] os.chdir("docs") # -- Project information ----------------------------------------------------- project = "conda-build" copyright = "2018, Anaconda, Inc." author = "Anaconda, Inc." # The full version, including alpha/beta/rc tags release = version # -- General configuration --------------------------------------------------- # If your documentation needs a minimal Sphinx version, state it here. # # needs_sphinx = '1.0' # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom # ones. extensions = [ "myst_parser", "sphinx.ext.autodoc", "sphinx.ext.doctest", "sphinx.ext.intersphinx", "sphinx.ext.todo", "sphinx.ext.coverage", "sphinx_sitemap", ] myst_heading_anchors = 3 myst_enable_extensions = [ "amsmath", "colon_fence", "deflist", "dollarmath", "html_admonition", "html_image", "linkify", "replacements", "smartquotes", "substitution", "tasklist", ] # Add any paths that contain templates here, relative to this directory. templates_path = ["_templates"] # Leave double dashes as they are in the docs. Don't replace -- with - smartquotes = False # The suffix(es) of source filenames. # You can specify multiple suffix as a list of string: # # source_suffix = ['.rst', '.md'] source_suffix = ".rst" # The master toctree document. master_doc = "index" # The language for content autogenerated by Sphinx. Refer to documentation # for a list of supported languages. # # This is also used if you do content translation via gettext catalogs. # Usually you set "language" from the command line for these cases. language = None # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. # This pattern also affects html_static_path and html_extra_path . exclude_patterns = ["_build", "build", "Thumbs.db", ".DS_Store"] # The name of the Pygments (syntax highlighting) style to use. pygments_style = "sphinx" # -- Options for HTML output ------------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. # html_theme = "sphinx_rtd_theme" # Theme options are theme-specific and customize the look and feel of a theme # further. For a list of options available for each theme, see the # documentation. # # html_theme_options = {} html_short_title = "conda-build" html_show_sourcelink = False html_favicon = "conda-logo.png" html_extra_path = ["robots.txt"] # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = ["_static"] # Custom sidebar templates, must be a dictionary that maps document names # to template names. # # The default sidebars (for documents that don't match any pattern) are # defined by theme itself. Builtin themes are using these templates by # default: ``['localtoc.html', 'relations.html', 'sourcelink.html', # 'searchbox.html']``. # # html_sidebars = {} # Setting the prod URL of the site here as the base URL. html_baseurl = f"https://docs.conda.io/projects/{project}/" # We don't have a locale set, so we can safely ignore that for the sitemaps. sitemap_locales = [None] # We're hard-coding stable here since that's what we want Google to point to. sitemap_url_scheme = "{lang}stable/{link}" # -- Options for HTMLHelp output --------------------------------------------- # Output file base name for HTML help builder. htmlhelp_basename = "conda-builddoc" # -- Options for LaTeX output ------------------------------------------------ latex_elements = { # The paper size ('letterpaper' or 'a4paper'). # # 'papersize': 'letterpaper', # The font size ('10pt', '11pt' or '12pt'). # # 'pointsize': '10pt', # Additional stuff for the LaTeX preamble. # # 'preamble': '', # Latex figure (float) alignment # # 'figure_align': 'htbp', } # Grouping the document tree into LaTeX files. List of tuples # (source start file, target name, title, # author, documentclass [howto, manual, or own class]). latex_documents = [ ( master_doc, "conda-build.tex", "conda-build Documentation", "Anaconda, Inc.", "manual", ), ] # -- Options for manual page output ------------------------------------------ # One entry per manual page. List of tuples # (source start file, name, description, authors, manual section). man_pages = [(master_doc, "conda-build", "conda-build Documentation", [author], 1)] # -- Options for Texinfo output ---------------------------------------------- # Grouping the document tree into Texinfo files. List of tuples # (source start file, target name, title, author, # dir menu entry, description, category) texinfo_documents = [ ( master_doc, "conda-build", "conda-build Documentation", author, "conda-build", "One line description of project.", "Miscellaneous", ), ] # -- Extension configuration ------------------------------------------------- # -- Options for intersphinx extension --------------------------------------- # Example configuration for intersphinx: refer to the Python standard library. intersphinx_mapping = {"https://docs.python.org/": None} # -- Options for todo extension ---------------------------------------------- # If true, `todo` and `todoList` produce output, else they produce nothing. todo_include_todos = True html_style = "css/custom.css" ########################################################################### # auto-created readthedocs.org specific configuration # ########################################################################### # # The following code was added during an automated build on readthedocs.org # It is auto created and injected for every build. The result is based on the # conf.py.tmpl file found in the readthedocs.org codebase: # https://github.com/rtfd/readthedocs.org/blob/main/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl # # Note: this file shouldn't rely on extra dependencies. import importlib import sys import os.path # Borrowed from six. PY3 = sys.version_info[0] == 3 string_types = str if PY3 else basestring from sphinx import version_info # Get suffix for proper linking to GitHub # This is deprecated in Sphinx 1.3+, # as each page can have its own suffix if globals().get('source_suffix', False): if isinstance(source_suffix, string_types): SUFFIX = source_suffix elif isinstance(source_suffix, (list, tuple)): # Sphinx >= 1.3 supports list/tuple to define multiple suffixes SUFFIX = source_suffix[0] elif isinstance(source_suffix, dict): # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes SUFFIX = list(source_suffix.keys())[0] # make a ``list()`` for py2/py3 compatibility else: # default to .rst SUFFIX = '.rst' else: SUFFIX = '.rst' # Add RTD Static Path. Add to the end because it overwrites previous files. if not 'html_static_path' in globals(): html_static_path = [] if os.path.exists('_static'): html_static_path.append('_static') # Add RTD Theme only if they aren't overriding it already using_rtd_theme = ( ( 'html_theme' in globals() and html_theme in ['default'] and # Allow people to bail with a hack of having an html_style 'html_style' not in globals() ) or 'html_theme' not in globals() ) if using_rtd_theme: theme = importlib.import_module('sphinx_rtd_theme') html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} if 'html_theme_path' in globals(): html_theme_path.append(theme.get_html_theme_path()) else: html_theme_path = [theme.get_html_theme_path()] if globals().get('websupport2_base_url', False): websupport2_base_url = 'https://readthedocs.com/websupport' websupport2_static_url = 'https://assets.readthedocs.com/' #Add project information to the template context. context = { 'using_theme': using_rtd_theme, 'html_theme': html_theme, 'current_version': "stable", 'version_slug': "stable", 'MEDIA_URL': "https://media.readthedocs.com/media/", 'STATIC_URL': "https://assets.readthedocs.com/", 'PRODUCTION_DOMAIN': "readthedocs.com", 'proxied_static_path': "/_/static/", 'versions': [ ("latest", "/en/latest/"), ("stable", "/en/stable/"), ("3.23.x", "/en/3.23.x/"), ("3.22.x", "/en/3.22.x/"), ("main", "/en/main/"), ("3.21.x", "/en/3.21.x/"), ], 'downloads': [ ], 'subprojects': [ ], 'slug': 'continuumio-conda-build', 'name': u'conda-build', 'rtd_language': u'en', 'programming_language': u'words', 'canonical_url': 'https://docs.conda.io/projects/conda-build/en/stable/', 'analytics_code': 'UA-143891876-1', 'single_version': False, 'conf_py_path': '/docs/source/', 'api_host': 'https://readthedocs.com', 'github_user': 'conda', 'proxied_api_host': '/_', 'github_repo': 'conda-build', 'github_version': '20b08017b9308309f8feb877493db0c09d6a91c0', 'display_github': True, 'bitbucket_user': 'None', 'bitbucket_repo': 'None', 'bitbucket_version': '20b08017b9308309f8feb877493db0c09d6a91c0', 'display_bitbucket': False, 'gitlab_user': 'None', 'gitlab_repo': 'None', 'gitlab_version': '20b08017b9308309f8feb877493db0c09d6a91c0', 'display_gitlab': False, 'READTHEDOCS': True, 'using_theme': (html_theme == "default"), 'new_theme': (html_theme == "sphinx_rtd_theme"), 'source_suffix': SUFFIX, 'ad_free': False, 'docsearch_disabled': False, 'user_analytics_code': 'UA-143891876-1', 'global_analytics_code': 'UA-17997319-2', 'commit': '20b08017', } # For sphinx >=1.8 we can use html_baseurl to set the canonical URL. # https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-html_baseurl if version_info >= (1, 8): if not globals().get('html_baseurl'): html_baseurl = context['canonical_url'] context['canonical_url'] = None if 'html_context' in globals(): html_context.update(context) else: html_context = context # Add custom RTD extension if 'extensions' in globals(): # Insert at the beginning because it can interfere # with other extensions. # See https://github.com/rtfd/readthedocs.org/pull/4054 extensions.insert(0, "readthedocs_ext.readthedocs") else: extensions = ["readthedocs_ext.readthedocs"] # Add External version warning banner to the external version documentation if 'tag' == 'external': extensions.insert(1, "readthedocs_ext.external_version_warning") readthedocs_vcs_url = 'None' readthedocs_build_url = 'https://readthedocs.com/projects/continuumio-conda-build/builds/1220014/' project_language = 'en' # User's Sphinx configurations language_user = globals().get('language', None) latex_engine_user = globals().get('latex_engine', None) latex_elements_user = globals().get('latex_elements', None) # Remove this once xindy gets installed in Docker image and XINDYOPS # env variable is supported # https://github.com/rtfd/readthedocs-docker-images/pull/98 latex_use_xindy = False chinese = any([ language_user in ('zh_CN', 'zh_TW'), project_language in ('zh_CN', 'zh_TW'), ]) japanese = any([ language_user == 'ja', project_language == 'ja', ]) if chinese: latex_engine = latex_engine_user or 'xelatex' latex_elements_rtd = { 'preamble': '\\usepackage[UTF8]{ctex}\n', } latex_elements = latex_elements_user or latex_elements_rtd elif japanese: latex_engine = latex_engine_user or 'platex' # Make sure our build directory is always excluded exclude_patterns = globals().get('exclude_patterns', []) exclude_patterns.extend(['_build']) [rtd-command-info] start-time: 2022-12-13T16:19:33.221577Z, end-time: 2022-12-13T16:19:42.492611Z, duration: 9, exit-code: 0 python -m sphinx -T -E -b html -d _build/doctrees -D language=en . _build/html Running Sphinx v4.2.0 loading translations [en]... done making output directory... done myst v0.15.2: MdParserConfig(renderer='sphinx', commonmark_only=False, enable_extensions=['amsmath', 'colon_fence', 'deflist', 'dollarmath', 'html_admonition', 'html_image', 'linkify', 'replacements', 'smartquotes', 'substitution', 'tasklist'], dmath_allow_labels=True, dmath_allow_space=True, dmath_allow_digits=True, dmath_double_inline=False, update_mathjax=True, mathjax_classes='tex2jax_process|mathjax_process|math|output_area', disable_syntax=[], url_schemes=['http', 'https', 'mailto', 'ftp'], heading_anchors=3, heading_slug_func=None, html_meta=[], footnote_transition=True, substitutions=[], sub_delimiters=['{', '}'], words_per_minute=200) loading intersphinx inventory from https://docs.python.org/objects.inv... intersphinx inventory has moved: https://docs.python.org/objects.inv -> https://docs.python.org/3/objects.inv building [mo]: targets for 0 po files that are out of date building [html]: targets for 51 source files that are out of date updating environment: [new config] 51 added, 0 changed, 0 removed reading sources... [ 1%] concepts/channels reading sources... [ 3%] concepts/generating-index reading sources... [ 5%] concepts/index reading sources... [ 7%] concepts/package-naming-conv reading sources... [ 9%] concepts/recipe reading sources... [ 11%] contributing-guide reading sources... [ 13%] index reading sources... [ 15%] install-conda-build reading sources... [ 17%] release-notes reading sources... [ 19%] resources/activate-scripts reading sources... [ 21%] resources/add-win-start-menu-items reading sources... [ 23%] resources/build-scripts reading sources... [ 25%] resources/commands/conda-build reading sources... [ 27%] resources/commands/conda-convert reading sources... [ 29%] resources/commands/conda-develop reading sources... [ 31%] resources/commands/conda-index reading sources... [ 33%] resources/commands/conda-inspect reading sources... [ 35%] resources/commands/conda-inspect-channels reading sources... [ 37%] resources/commands/conda-inspect-linkages reading sources... [ 39%] resources/commands/conda-inspect-objects reading sources... [ 41%] resources/commands/conda-metapackage reading sources... [ 43%] resources/commands/conda-render reading sources... [ 45%] resources/commands/conda-skeleton reading sources... [ 47%] resources/commands/conda-skeleton-cpan reading sources... [ 49%] resources/commands/conda-skeleton-cran reading sources... [ 50%] resources/commands/conda-skeleton-luarocks reading sources... [ 52%] resources/commands/conda-skeleton-pypi reading sources... [ 54%] resources/commands/index reading sources... [ 56%] resources/compiler-tools reading sources... [ 58%] resources/define-metadata reading sources... [ 60%] resources/index reading sources... [ 62%] resources/link-scripts reading sources... [ 64%] resources/make-relocatable reading sources... [ 66%] resources/package-spec reading sources... [ 68%] resources/style-guide reading sources... [ 70%] resources/tutorial-template reading sources... [ 72%] resources/use-shared-libraries reading sources... [ 74%] resources/variants reading sources... [ 76%] user-guide/environment-variables reading sources... [ 78%] user-guide/getting-started reading sources... [ 80%] user-guide/index reading sources... [ 82%] user-guide/recipes/build-without-recipe reading sources... [ 84%] user-guide/recipes/debugging reading sources... [ 86%] user-guide/recipes/index reading sources... [ 88%] user-guide/recipes/sample-recipes reading sources... [ 90%] user-guide/tutorials/build-pkgs reading sources... [ 92%] user-guide/tutorials/build-pkgs-skeleton reading sources... [ 94%] user-guide/tutorials/build-r-pkgs reading sources... [ 96%] user-guide/tutorials/building-conda-packages reading sources... [ 98%] user-guide/tutorials/index reading sources... [100%] user-guide/wheel-files /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/checkouts/stable/docs/source/index.rst:18: WARNING: Unexpected indentation. /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/checkouts/stable/docs/source/index.rst:15: WARNING: Inline interpreted text or phrase reference start-string without end-string. /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/checkouts/stable/CHANGELOG.md:2616: WARNING: Substitution error:UndefinedError: 'compiler' is undefined looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done writing output... [ 1%] concepts/channels writing output... [ 3%] concepts/generating-index writing output... [ 5%] concepts/index writing output... [ 7%] concepts/package-naming-conv writing output... [ 9%] concepts/recipe writing output... [ 11%] contributing-guide writing output... [ 13%] index writing output... [ 15%] install-conda-build writing output... [ 17%] release-notes writing output... [ 19%] resources/activate-scripts writing output... [ 21%] resources/add-win-start-menu-items writing output... [ 23%] resources/build-scripts writing output... [ 25%] resources/commands/conda-build writing output... [ 27%] resources/commands/conda-convert writing output... [ 29%] resources/commands/conda-develop writing output... [ 31%] resources/commands/conda-index writing output... [ 33%] resources/commands/conda-inspect writing output... [ 35%] resources/commands/conda-inspect-channels writing output... [ 37%] resources/commands/conda-inspect-linkages writing output... [ 39%] resources/commands/conda-inspect-objects writing output... [ 41%] resources/commands/conda-metapackage writing output... [ 43%] resources/commands/conda-render writing output... [ 45%] resources/commands/conda-skeleton writing output... [ 47%] resources/commands/conda-skeleton-cpan writing output... [ 49%] resources/commands/conda-skeleton-cran writing output... [ 50%] resources/commands/conda-skeleton-luarocks writing output... [ 52%] resources/commands/conda-skeleton-pypi writing output... [ 54%] resources/commands/index writing output... [ 56%] resources/compiler-tools writing output... [ 58%] resources/define-metadata writing output... [ 60%] resources/index writing output... [ 62%] resources/link-scripts writing output... [ 64%] resources/make-relocatable writing output... [ 66%] resources/package-spec writing output... [ 68%] resources/style-guide writing output... [ 70%] resources/tutorial-template writing output... [ 72%] resources/use-shared-libraries writing output... [ 74%] resources/variants writing output... [ 76%] user-guide/environment-variables writing output... [ 78%] user-guide/getting-started writing output... [ 80%] user-guide/index writing output... [ 82%] user-guide/recipes/build-without-recipe writing output... [ 84%] user-guide/recipes/debugging writing output... [ 86%] user-guide/recipes/index writing output... [ 88%] user-guide/recipes/sample-recipes writing output... [ 90%] user-guide/tutorials/build-pkgs writing output... [ 92%] user-guide/tutorials/build-pkgs-skeleton writing output... [ 94%] user-guide/tutorials/build-r-pkgs writing output... [ 96%] user-guide/tutorials/building-conda-packages writing output... [ 98%] user-guide/tutorials/index writing output... [100%] user-guide/wheel-files generating indices... genindex done writing additional pages... search done copying images... [100%] img/conda_names.png copying downloadable files... [100%] user-guide/tutorials/meta.yaml copying static files... done copying extra files... done dumping search index in English (code: en)... done dumping object inventory... done build succeeded, 3 warnings. The HTML pages are in _build/html. Updating searchtools for Read the Docs search... sitemap.xml was generated for URL https://docs.conda.io/projects/conda-build/ in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/checkouts/stable/docs/source/_build/html/sitemap.xml