Read the Docs build information
Build id: 1039870
Project: continuumio-conda-build
Version: stable
Commit: cc6c050ee3325e6957dbf60f74dbe79d78d26a8f
Date: 2022-08-03T23:52:47.922515Z
State: finished
Success: True


[rtd-command-info] start-time: 2022-08-03T23:52:49.899371Z, end-time: 2022-08-03T23:52:53.190085Z, duration: 3, exit-code: 0
git clone --no-single-branch --depth 50 https://github.com/conda/conda-build.git .
Cloning into '.'...

[rtd-command-info] start-time: 2022-08-03T23:52:53.443542Z, end-time: 2022-08-03T23:52:53.608941Z, duration: 0, exit-code: 0
git checkout --force cc6c050ee3325e6957dbf60f74dbe79d78d26a8f
Note: switching to 'cc6c050ee3325e6957dbf60f74dbe79d78d26a8f'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:

  git switch -c <new-branch-name>

Or undo this operation with:

  git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at cc6c050e Release 3.22.0 (#4543)

[rtd-command-info] start-time: 2022-08-03T23:52:53.852715Z, end-time: 2022-08-03T23:52:53.916417Z, duration: 0, exit-code: 0
git clean -d -f -f


[rtd-command-info] start-time: 2022-08-03T23:52:54.953204Z, end-time: 2022-08-03T23:52:59.374376Z, duration: 4, exit-code: 0
python3.7 -mvirtualenv 
Using base prefix '/home/docs/.pyenv/versions/3.7.9'
New python executable in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/bin/python3.7
Also creating executable in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/bin/python
Installing setuptools, pip, wheel...
done.

[rtd-command-info] start-time: 2022-08-03T23:52:59.559749Z, end-time: 2022-08-03T23:53:01.257156Z, duration: 1, exit-code: 0
python -m pip install --upgrade --no-cache-dir pip setuptools<58.3.0
Requirement already satisfied: pip in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (22.2.2)
Collecting setuptools<58.3.0
  Downloading setuptools-58.2.0-py3-none-any.whl (946 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 946.1/946.1 kB 31.9 MB/s eta 0:00:00
Installing collected packages: setuptools
  Attempting uninstall: setuptools
    Found existing installation: setuptools 63.4.1
    Uninstalling setuptools-63.4.1:
      Successfully uninstalled setuptools-63.4.1
Successfully installed setuptools-58.2.0

[rtd-command-info] start-time: 2022-08-03T23:53:01.464584Z, end-time: 2022-08-03T23:53:08.965595Z, duration: 7, exit-code: 0
python -m pip install --upgrade --no-cache-dir mock==1.0.1 pillow==5.4.1 alabaster>=0.7,<0.8,!=0.7.5 commonmark==0.8.1 recommonmark==0.5.0 sphinx<2 sphinx-rtd-theme<0.5 readthedocs-sphinx-ext<2.2 jinja2<3.1.0
Collecting mock==1.0.1
  Downloading mock-1.0.1.zip (861 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 861.9/861.9 kB 31.0 MB/s eta 0:00:00
  Preparing metadata (setup.py): started
  Preparing metadata (setup.py): finished with status 'done'
Collecting pillow==5.4.1
  Downloading Pillow-5.4.1-cp37-cp37m-manylinux1_x86_64.whl (2.0 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.0/2.0 MB 184.9 MB/s eta 0:00:00
Collecting alabaster!=0.7.5,<0.8,>=0.7
  Downloading alabaster-0.7.12-py2.py3-none-any.whl (14 kB)
Collecting commonmark==0.8.1
  Downloading commonmark-0.8.1-py2.py3-none-any.whl (47 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 47.4/47.4 kB 188.5 MB/s eta 0:00:00
Collecting recommonmark==0.5.0
  Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB)
Collecting sphinx<2
  Downloading Sphinx-1.8.6-py2.py3-none-any.whl (3.1 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 213.4 MB/s eta 0:00:00
Collecting sphinx-rtd-theme<0.5
  Downloading sphinx_rtd_theme-0.4.3-py2.py3-none-any.whl (6.4 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.4/6.4 MB 215.8 MB/s eta 0:00:00
Collecting readthedocs-sphinx-ext<2.2
  Downloading readthedocs_sphinx_ext-2.1.8-py2.py3-none-any.whl (11 kB)
Collecting jinja2<3.1.0
  Downloading Jinja2-3.0.3-py3-none-any.whl (133 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.6/133.6 kB 224.4 MB/s eta 0:00:00
Collecting future
  Downloading future-0.18.2.tar.gz (829 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 829.2/829.2 kB 249.8 MB/s eta 0:00:00
  Preparing metadata (setup.py): started
  Preparing metadata (setup.py): finished with status 'done'
Collecting docutils>=0.11
  Downloading docutils-0.19-py3-none-any.whl (570 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 570.5/570.5 kB 253.7 MB/s eta 0:00:00
Collecting sphinxcontrib-websupport
  Downloading sphinxcontrib_websupport-1.2.4-py2.py3-none-any.whl (39 kB)
Collecting requests>=2.0.0
  Downloading requests-2.28.1-py3-none-any.whl (62 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.8/62.8 kB 57.6 MB/s eta 0:00:00
Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from sphinx<2) (58.2.0)
Collecting babel!=2.0,>=1.3
  Downloading Babel-2.10.3-py3-none-any.whl (9.5 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 9.5/9.5 MB 151.2 MB/s eta 0:00:00
Collecting snowballstemmer>=1.1
  Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl (93 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.0/93.0 kB 211.2 MB/s eta 0:00:00
Collecting six>=1.5
  Downloading six-1.16.0-py2.py3-none-any.whl (11 kB)
Collecting Pygments>=2.0
  Downloading Pygments-2.12.0-py3-none-any.whl (1.1 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 252.8 MB/s eta 0:00:00
Collecting imagesize
  Downloading imagesize-1.4.1-py2.py3-none-any.whl (8.8 kB)
Collecting packaging
  Downloading packaging-21.3-py3-none-any.whl (40 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40.8/40.8 kB 9.7 MB/s eta 0:00:00
Collecting docutils>=0.11
  Downloading docutils-0.17.1-py2.py3-none-any.whl (575 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 575.5/575.5 kB 250.0 MB/s eta 0:00:00
Collecting MarkupSafe>=2.0
  Downloading MarkupSafe-2.1.1-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (25 kB)
Collecting pytz>=2015.7
  Downloading pytz-2022.1-py2.py3-none-any.whl (503 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 503.5/503.5 kB 247.0 MB/s eta 0:00:00
Collecting certifi>=2017.4.17
  Downloading certifi-2022.6.15-py3-none-any.whl (160 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 160.2/160.2 kB 225.1 MB/s eta 0:00:00
Collecting idna<4,>=2.5
  Downloading idna-3.3-py3-none-any.whl (61 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.2/61.2 kB 204.2 MB/s eta 0:00:00
Collecting charset-normalizer<3,>=2
  Downloading charset_normalizer-2.1.0-py3-none-any.whl (39 kB)
Collecting urllib3<1.27,>=1.21.1
  Downloading urllib3-1.26.11-py2.py3-none-any.whl (139 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 139.9/139.9 kB 220.0 MB/s eta 0:00:00
Collecting pyparsing!=3.0.5,>=2.0.2
  Downloading pyparsing-3.0.9-py3-none-any.whl (98 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.3/98.3 kB 192.4 MB/s eta 0:00:00
Collecting sphinxcontrib-serializinghtml
  Downloading sphinxcontrib_serializinghtml-1.1.5-py2.py3-none-any.whl (94 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 94.0/94.0 kB 192.7 MB/s eta 0:00:00
Building wheels for collected packages: mock, future
  Building wheel for mock (setup.py): started
  Building wheel for mock (setup.py): finished with status 'done'
  Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23773 sha256=5af8dc68079127776f654ba2d60d87897aee988fbac7af2aac20d916944bba64
  Stored in directory: /tmp/pip-ephem-wheel-cache-ori9lkv4/wheels/7a/94/b1/0fdc5339a5bd487a5cc15421ec200d9ba3e2aa7190e4a727f1
  Building wheel for future (setup.py): started
  Building wheel for future (setup.py): finished with status 'done'
  Created wheel for future: filename=future-0.18.2-py3-none-any.whl size=491070 sha256=3041b56b246568527a6011b7bedf687cd4642db82a4cd45a41da731a4d07b5d1
  Stored in directory: /tmp/pip-ephem-wheel-cache-ori9lkv4/wheels/56/b0/fe/4410d17b32f1f0c3cf54cdfb2bc04d7b4b8f4ae377e2229ba0
Successfully built mock future
Installing collected packages: snowballstemmer, pytz, mock, alabaster, urllib3, sphinxcontrib-serializinghtml, six, pyparsing, Pygments, pillow, MarkupSafe, imagesize, idna, future, docutils, charset-normalizer, certifi, babel, sphinxcontrib-websupport, requests, packaging, jinja2, commonmark, sphinx, readthedocs-sphinx-ext, sphinx-rtd-theme, recommonmark
Successfully installed MarkupSafe-2.1.1 Pygments-2.12.0 alabaster-0.7.12 babel-2.10.3 certifi-2022.6.15 charset-normalizer-2.1.0 commonmark-0.8.1 docutils-0.17.1 future-0.18.2 idna-3.3 imagesize-1.4.1 jinja2-3.0.3 mock-1.0.1 packaging-21.3 pillow-5.4.1 pyparsing-3.0.9 pytz-2022.1 readthedocs-sphinx-ext-2.1.8 recommonmark-0.5.0 requests-2.28.1 six-1.16.0 snowballstemmer-2.2.0 sphinx-1.8.6 sphinx-rtd-theme-0.4.3 sphinxcontrib-serializinghtml-1.1.5 sphinxcontrib-websupport-1.2.4 urllib3-1.26.11

[rtd-command-info] start-time: 2022-08-03T23:53:09.155771Z, end-time: 2022-08-03T23:53:17.198364Z, duration: 8, exit-code: 0
python -m pip install --exists-action=w --no-cache-dir -r docs/requirements.txt
Collecting linkify-it-py==1.0.1
  Downloading linkify_it_py-1.0.1-py3-none-any.whl (19 kB)
Collecting myst-parser==0.15.2
  Downloading myst_parser-0.15.2-py3-none-any.whl (46 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 46.3/46.3 kB 6.0 MB/s eta 0:00:00
Collecting Pillow==9.0.1
  Downloading Pillow-9.0.1-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (4.3 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.3/4.3 MB 92.4 MB/s eta 0:00:00
Collecting PyYAML==5.4.1
  Downloading PyYAML-5.4.1-cp37-cp37m-manylinux1_x86_64.whl (636 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 636.6/636.6 kB 239.5 MB/s eta 0:00:00
Collecting requests==2.26.0
  Downloading requests-2.26.0-py2.py3-none-any.whl (62 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.3/62.3 kB 204.3 MB/s eta 0:00:00
Collecting ruamel.yaml==0.17.16
  Downloading ruamel.yaml-0.17.16-py3-none-any.whl (109 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 109.0/109.0 kB 207.9 MB/s eta 0:00:00
Collecting Sphinx==4.2.0
  Downloading Sphinx-4.2.0-py3-none-any.whl (3.1 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 221.8 MB/s eta 0:00:00
Collecting sphinx-argparse==0.3.1
  Downloading sphinx_argparse-0.3.1-py2.py3-none-any.whl (12 kB)
Collecting sphinx-autobuild==2021.3.14
  Downloading sphinx_autobuild-2021.3.14-py3-none-any.whl (9.9 kB)
Collecting sphinx-rtd-theme==1.0.0
  Downloading sphinx_rtd_theme-1.0.0-py2.py3-none-any.whl (2.8 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.8/2.8 MB 203.3 MB/s eta 0:00:00
Collecting sphinxcontrib-applehelp==1.0.2
  Downloading sphinxcontrib_applehelp-1.0.2-py2.py3-none-any.whl (121 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 121.2/121.2 kB 220.9 MB/s eta 0:00:00
Collecting sphinxcontrib-devhelp==1.0.2
  Downloading sphinxcontrib_devhelp-1.0.2-py2.py3-none-any.whl (84 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 84.7/84.7 kB 216.6 MB/s eta 0:00:00
Collecting sphinxcontrib-htmlhelp==2.0.0
  Downloading sphinxcontrib_htmlhelp-2.0.0-py2.py3-none-any.whl (100 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100.5/100.5 kB 216.1 MB/s eta 0:00:00
Collecting sphinxcontrib-jsmath==1.0.1
  Downloading sphinxcontrib_jsmath-1.0.1-py2.py3-none-any.whl (5.1 kB)
Collecting sphinxcontrib-plantuml==0.21
  Downloading sphinxcontrib-plantuml-0.21.tar.gz (11 kB)
  Preparing metadata (setup.py): started
  Preparing metadata (setup.py): finished with status 'done'
Collecting sphinxcontrib-programoutput==0.17
  Downloading sphinxcontrib_programoutput-0.17-py2.py3-none-any.whl (22 kB)
Collecting sphinxcontrib-qthelp==1.0.3
  Downloading sphinxcontrib_qthelp-1.0.3-py2.py3-none-any.whl (90 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.6/90.6 kB 220.5 MB/s eta 0:00:00
Requirement already satisfied: sphinxcontrib-serializinghtml==1.1.5 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from -r docs/requirements.txt (line 18)) (1.1.5)
Collecting pylint==2.11.1
  Downloading pylint-2.11.1-py3-none-any.whl (392 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 392.1/392.1 kB 258.0 MB/s eta 0:00:00
Collecting uc-micro-py
  Downloading uc_micro_py-1.0.1-py3-none-any.whl (6.2 kB)
Collecting markdown-it-py<2.0.0,>=1.0.0
  Downloading markdown_it_py-1.1.0-py3-none-any.whl (83 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 83.6/83.6 kB 197.8 MB/s eta 0:00:00
Collecting mdit-py-plugins~=0.2.8
  Downloading mdit_py_plugins-0.2.8-py3-none-any.whl (41 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 41.0/41.0 kB 161.5 MB/s eta 0:00:00
Requirement already satisfied: jinja2 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from myst-parser==0.15.2->-r docs/requirements.txt (line 2)) (3.0.3)
Requirement already satisfied: docutils<0.18,>=0.15 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from myst-parser==0.15.2->-r docs/requirements.txt (line 2)) (0.17.1)
Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from requests==2.26.0->-r docs/requirements.txt (line 5)) (1.26.11)
Requirement already satisfied: idna<4,>=2.5 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from requests==2.26.0->-r docs/requirements.txt (line 5)) (3.3)
Requirement already satisfied: certifi>=2017.4.17 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from requests==2.26.0->-r docs/requirements.txt (line 5)) (2022.6.15)
Collecting charset-normalizer~=2.0.0
  Downloading charset_normalizer-2.0.12-py3-none-any.whl (39 kB)
Collecting ruamel.yaml.clib>=0.1.2
  Downloading ruamel.yaml.clib-0.2.6-cp37-cp37m-manylinux1_x86_64.whl (546 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 546.8/546.8 kB 247.1 MB/s eta 0:00:00
Requirement already satisfied: Pygments>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (2.12.0)
Requirement already satisfied: alabaster<0.8,>=0.7 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (0.7.12)
Requirement already satisfied: packaging in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (21.3)
Requirement already satisfied: snowballstemmer>=1.1 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (2.2.0)
Requirement already satisfied: babel>=1.3 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (2.10.3)
Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (58.2.0)
Requirement already satisfied: imagesize in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (1.4.1)
Collecting colorama
  Downloading colorama-0.4.5-py2.py3-none-any.whl (16 kB)
Collecting livereload
  Downloading livereload-2.6.3.tar.gz (25 kB)
  Preparing metadata (setup.py): started
  Preparing metadata (setup.py): finished with status 'done'
Collecting isort<6,>=4.2.5
  Downloading isort-5.10.1-py3-none-any.whl (103 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 103.4/103.4 kB 218.6 MB/s eta 0:00:00
Collecting platformdirs>=2.2.0
  Downloading platformdirs-2.5.2-py3-none-any.whl (14 kB)
Collecting mccabe<0.7,>=0.6
  Downloading mccabe-0.6.1-py2.py3-none-any.whl (8.6 kB)
Collecting astroid<2.9,>=2.8.0
  Downloading astroid-2.8.6-py3-none-any.whl (248 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 248.7/248.7 kB 236.0 MB/s eta 0:00:00
Collecting typing-extensions>=3.10.0
  Downloading typing_extensions-4.3.0-py3-none-any.whl (25 kB)
Collecting toml>=0.7.1
  Downloading toml-0.10.2-py2.py3-none-any.whl (16 kB)
Collecting lazy-object-proxy>=1.4.0
  Downloading lazy_object_proxy-1.7.1-cp37-cp37m-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (57 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 57.8/57.8 kB 170.2 MB/s eta 0:00:00
Collecting wrapt<1.14,>=1.11
  Downloading wrapt-1.13.3-cp37-cp37m-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl (79 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 79.4/79.4 kB 203.5 MB/s eta 0:00:00
Collecting typed-ast<2.0,>=1.4.0
  Downloading typed_ast-1.5.4-cp37-cp37m-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl (843 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 843.7/843.7 kB 238.3 MB/s eta 0:00:00
Requirement already satisfied: pytz>=2015.7 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from babel>=1.3->Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (2022.1)
Requirement already satisfied: MarkupSafe>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from jinja2->myst-parser==0.15.2->-r docs/requirements.txt (line 2)) (2.1.1)
Collecting attrs<22,>=19
  Downloading attrs-21.4.0-py2.py3-none-any.whl (60 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 60.6/60.6 kB 198.3 MB/s eta 0:00:00
Requirement already satisfied: six in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from livereload->sphinx-autobuild==2021.3.14->-r docs/requirements.txt (line 9)) (1.16.0)
Collecting tornado
  Downloading tornado-6.2-cp37-abi3-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (423 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 424.0/424.0 kB 240.6 MB/s eta 0:00:00
Requirement already satisfied: pyparsing!=3.0.5,>=2.0.2 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/envs/stable/lib/python3.7/site-packages (from packaging->Sphinx==4.2.0->-r docs/requirements.txt (line 7)) (3.0.9)
Building wheels for collected packages: sphinxcontrib-plantuml, livereload
  Building wheel for sphinxcontrib-plantuml (setup.py): started
  Building wheel for sphinxcontrib-plantuml (setup.py): finished with status 'done'
  Created wheel for sphinxcontrib-plantuml: filename=sphinxcontrib_plantuml-0.21-py3-none-any.whl size=10432 sha256=8f8b4a426ad7cbf06ea5f507d25a260355f74693a68f0bed7d16aac5bf29ce98
  Stored in directory: /tmp/pip-ephem-wheel-cache-x71mqc4f/wheels/5b/37/99/df4512c1572748c988292fda3b606c5610a60a3e1c3ce6a7ba
  Building wheel for livereload (setup.py): started
  Building wheel for livereload (setup.py): finished with status 'done'
  Created wheel for livereload: filename=livereload-2.6.3-py2.py3-none-any.whl size=24724 sha256=dd21c5dd932fa9c5a6c784e723f22f0aa31ed2ed1249eeb4ea9bdcb72903dbba
  Stored in directory: /tmp/pip-ephem-wheel-cache-x71mqc4f/wheels/d4/f2/03/55f37093eb8cb0c89d7efb206f792dba55cd5bd67b1c5b1ce1
Successfully built sphinxcontrib-plantuml livereload
Installing collected packages: mccabe, wrapt, uc-micro-py, typing-extensions, typed-ast, tornado, toml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, ruamel.yaml.clib, PyYAML, platformdirs, Pillow, lazy-object-proxy, isort, colorama, charset-normalizer, attrs, ruamel.yaml, requests, markdown-it-py, livereload, linkify-it-py, astroid, Sphinx, pylint, mdit-py-plugins, sphinxcontrib-programoutput, sphinxcontrib-plantuml, sphinx-rtd-theme, sphinx-autobuild, sphinx-argparse, myst-parser
  Attempting uninstall: Pillow
    Found existing installation: Pillow 5.4.1
    Uninstalling Pillow-5.4.1:
      Successfully uninstalled Pillow-5.4.1
  Attempting uninstall: charset-normalizer
    Found existing installation: charset-normalizer 2.1.0
    Uninstalling charset-normalizer-2.1.0:
      Successfully uninstalled charset-normalizer-2.1.0
  Attempting uninstall: requests
    Found existing installation: requests 2.28.1
    Uninstalling requests-2.28.1:
      Successfully uninstalled requests-2.28.1
  Attempting uninstall: Sphinx
    Found existing installation: Sphinx 1.8.6
    Uninstalling Sphinx-1.8.6:
      Successfully uninstalled Sphinx-1.8.6
  Attempting uninstall: sphinx-rtd-theme
    Found existing installation: sphinx-rtd-theme 0.4.3
    Uninstalling sphinx-rtd-theme-0.4.3:
      Successfully uninstalled sphinx-rtd-theme-0.4.3
Successfully installed Pillow-9.0.1 PyYAML-5.4.1 Sphinx-4.2.0 astroid-2.8.6 attrs-21.4.0 charset-normalizer-2.0.12 colorama-0.4.5 isort-5.10.1 lazy-object-proxy-1.7.1 linkify-it-py-1.0.1 livereload-2.6.3 markdown-it-py-1.1.0 mccabe-0.6.1 mdit-py-plugins-0.2.8 myst-parser-0.15.2 platformdirs-2.5.2 pylint-2.11.1 requests-2.26.0 ruamel.yaml-0.17.16 ruamel.yaml.clib-0.2.6 sphinx-argparse-0.3.1 sphinx-autobuild-2021.3.14 sphinx-rtd-theme-1.0.0 sphinxcontrib-applehelp-1.0.2 sphinxcontrib-devhelp-1.0.2 sphinxcontrib-htmlhelp-2.0.0 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-plantuml-0.21 sphinxcontrib-programoutput-0.17 sphinxcontrib-qthelp-1.0.3 toml-0.10.2 tornado-6.2 typed-ast-1.5.4 typing-extensions-4.3.0 uc-micro-py-1.0.1 wrapt-1.13.3

[rtd-command-info] start-time: 2022-08-03T23:53:18.985266Z, end-time: 2022-08-03T23:53:19.062223Z, duration: 0, exit-code: 0
cat docs/source/conf.py
#
# Configuration file for the Sphinx documentation builder.
#
# This file does only contain a selection of the most common options. For a
# full list see the documentation:
# http://www.sphinx-doc.org/en/master/config


# -- Path setup --------------------------------------------------------------

# If extensions (or modules to document with autodoc) are in another directory,
# add these directories to sys.path here. If the directory is relative to the
# documentation root, use os.path.abspath to make it absolute, like shown here.
#
import os
import sys

sys.path.insert(0, os.path.abspath("../.."))


os.chdir("../..")
import versioneer  # noqa: E402

version = versioneer.get_versions()["version"]

os.chdir("docs")
# -- Project information -----------------------------------------------------

project = "conda-build"
copyright = "2018, Anaconda, Inc."
author = "Anaconda, Inc."

# The full version, including alpha/beta/rc tags
release = version


# -- General configuration ---------------------------------------------------

# If your documentation needs a minimal Sphinx version, state it here.
#
# needs_sphinx = '1.0'

# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
extensions = [
    "myst_parser",
    "sphinx.ext.autodoc",
    "sphinx.ext.doctest",
    "sphinx.ext.intersphinx",
    "sphinx.ext.todo",
    "sphinx.ext.coverage",
]

myst_heading_anchors = 3
myst_enable_extensions = [
    "amsmath",
    "colon_fence",
    "deflist",
    "dollarmath",
    "html_admonition",
    "html_image",
    "linkify",
    "replacements",
    "smartquotes",
    "substitution",
    "tasklist",
]


# Add any paths that contain templates here, relative to this directory.
templates_path = ["_templates"]

# Leave double dashes as they are in the docs. Don't replace -- with -
smartquotes = False

# The suffix(es) of source filenames.
# You can specify multiple suffix as a list of string:
#
# source_suffix = ['.rst', '.md']
source_suffix = ".rst"

# The master toctree document.
master_doc = "index"

# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
#
# This is also used if you do content translation via gettext catalogs.
# Usually you set "language" from the command line for these cases.
language = None

# List of patterns, relative to source directory, that match files and
# directories to ignore when looking for source files.
# This pattern also affects html_static_path and html_extra_path .
exclude_patterns = ["_build", "build", "Thumbs.db", ".DS_Store"]

# The name of the Pygments (syntax highlighting) style to use.
pygments_style = "sphinx"


# -- Options for HTML output -------------------------------------------------

# The theme to use for HTML and HTML Help pages.  See the documentation for
# a list of builtin themes.
#
html_theme = "sphinx_rtd_theme"

# Theme options are theme-specific and customize the look and feel of a theme
# further.  For a list of options available for each theme, see the
# documentation.
#
# html_theme_options = {}

html_short_title = "conda-build"
html_show_sourcelink = False
html_favicon = "conda-logo.png"

# Add any paths that contain custom static files (such as style sheets) here,
# relative to this directory. They are copied after the builtin static files,
# so a file named "default.css" will overwrite the builtin "default.css".
html_static_path = ["_static"]

# Custom sidebar templates, must be a dictionary that maps document names
# to template names.
#
# The default sidebars (for documents that don't match any pattern) are
# defined by theme itself.  Builtin themes are using these templates by
# default: ``['localtoc.html', 'relations.html', 'sourcelink.html',
# 'searchbox.html']``.
#
# html_sidebars = {}


# -- Options for HTMLHelp output ---------------------------------------------

# Output file base name for HTML help builder.
htmlhelp_basename = "conda-builddoc"


# -- Options for LaTeX output ------------------------------------------------

latex_elements = {
    # The paper size ('letterpaper' or 'a4paper').
    #
    # 'papersize': 'letterpaper',
    # The font size ('10pt', '11pt' or '12pt').
    #
    # 'pointsize': '10pt',
    # Additional stuff for the LaTeX preamble.
    #
    # 'preamble': '',
    # Latex figure (float) alignment
    #
    # 'figure_align': 'htbp',
}

# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title,
#  author, documentclass [howto, manual, or own class]).
latex_documents = [
    (
        master_doc,
        "conda-build.tex",
        "conda-build Documentation",
        "Anaconda, Inc.",
        "manual",
    ),
]


# -- Options for manual page output ------------------------------------------

# One entry per manual page. List of tuples
# (source start file, name, description, authors, manual section).
man_pages = [(master_doc, "conda-build", "conda-build Documentation", [author], 1)]


# -- Options for Texinfo output ----------------------------------------------

# Grouping the document tree into Texinfo files. List of tuples
# (source start file, target name, title, author,
#  dir menu entry, description, category)
texinfo_documents = [
    (
        master_doc,
        "conda-build",
        "conda-build Documentation",
        author,
        "conda-build",
        "One line description of project.",
        "Miscellaneous",
    ),
]


# -- Extension configuration -------------------------------------------------

# -- Options for intersphinx extension ---------------------------------------

# Example configuration for intersphinx: refer to the Python standard library.
intersphinx_mapping = {"https://docs.python.org/": None}

# -- Options for todo extension ----------------------------------------------

# If true, `todo` and `todoList` produce output, else they produce nothing.
todo_include_todos = True

html_style = "css/custom.css"




###########################################################################
#          auto-created readthedocs.org specific configuration            #
###########################################################################


#
# The following code was added during an automated build on readthedocs.org
# It is auto created and injected for every build. The result is based on the
# conf.py.tmpl file found in the readthedocs.org codebase:
# https://github.com/rtfd/readthedocs.org/blob/main/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl
#
# Note: this file shouldn't rely on extra dependencies.

import importlib
import sys
import os.path

# Borrowed from six.
PY3 = sys.version_info[0] == 3
string_types = str if PY3 else basestring

from sphinx import version_info

# Get suffix for proper linking to GitHub
# This is deprecated in Sphinx 1.3+,
# as each page can have its own suffix
if globals().get('source_suffix', False):
    if isinstance(source_suffix, string_types):
        SUFFIX = source_suffix
    elif isinstance(source_suffix, (list, tuple)):
        # Sphinx >= 1.3 supports list/tuple to define multiple suffixes
        SUFFIX = source_suffix[0]
    elif isinstance(source_suffix, dict):
        # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes
        SUFFIX = list(source_suffix.keys())[0]  # make a ``list()`` for py2/py3 compatibility
    else:
        # default to .rst
        SUFFIX = '.rst'
else:
    SUFFIX = '.rst'

# Add RTD Static Path. Add to the end because it overwrites previous files.
if not 'html_static_path' in globals():
    html_static_path = []
if os.path.exists('_static'):
    html_static_path.append('_static')

# Add RTD Theme only if they aren't overriding it already
using_rtd_theme = (
    (
        'html_theme' in globals() and
        html_theme in ['default'] and
        # Allow people to bail with a hack of having an html_style
        'html_style' not in globals()
    ) or 'html_theme' not in globals()
)
if using_rtd_theme:
    theme = importlib.import_module('sphinx_rtd_theme')
    html_theme = 'sphinx_rtd_theme'
    html_style = None
    html_theme_options = {}
    if 'html_theme_path' in globals():
        html_theme_path.append(theme.get_html_theme_path())
    else:
        html_theme_path = [theme.get_html_theme_path()]

if globals().get('websupport2_base_url', False):
    websupport2_base_url = 'https://readthedocs.com/websupport'
    websupport2_static_url = 'https://assets.readthedocs.com/'


#Add project information to the template context.
context = {
    'using_theme': using_rtd_theme,
    'html_theme': html_theme,
    'current_version': "stable",
    'version_slug': "stable",
    'MEDIA_URL': "https://media.readthedocs.com/media/",
    'STATIC_URL': "https://assets.readthedocs.com/",
    'PRODUCTION_DOMAIN': "readthedocs.com",
    'proxied_static_path': "/_/static/",
    'versions': [
    ("latest", "/en/latest/"),
    ("stable", "/en/stable/"),
    ("main", "/en/main/"),
    ("3.21.x", "/en/3.21.x/"),
    ],
    'downloads': [ 
    ],
    'subprojects': [ 
    ],
    'slug': 'continuumio-conda-build',
    'name': u'conda-build',
    'rtd_language': u'en',
    'programming_language': u'words',
    'canonical_url': 'https://docs.conda.io/projects/conda-build/en/stable/',
    'analytics_code': 'UA-143891876-1',
    'single_version': False,
    'conf_py_path': '/docs/source/',
    'api_host': 'https://readthedocs.com',
    'github_user': 'conda',
    'proxied_api_host': '/_',
    'github_repo': 'conda-build',
    'github_version': 'cc6c050ee3325e6957dbf60f74dbe79d78d26a8f',
    'display_github': True,
    'bitbucket_user': 'None',
    'bitbucket_repo': 'None',
    'bitbucket_version': 'cc6c050ee3325e6957dbf60f74dbe79d78d26a8f',
    'display_bitbucket': False,
    'gitlab_user': 'None',
    'gitlab_repo': 'None',
    'gitlab_version': 'cc6c050ee3325e6957dbf60f74dbe79d78d26a8f',
    'display_gitlab': False,
    'READTHEDOCS': True,
    'using_theme': (html_theme == "default"),
    'new_theme': (html_theme == "sphinx_rtd_theme"),
    'source_suffix': SUFFIX,
    'ad_free': False,
    'docsearch_disabled': False,
    'user_analytics_code': 'UA-143891876-1',
    'global_analytics_code': 'UA-17997319-2',
    'commit': 'cc6c050e',
}

# For sphinx >=1.8 we can use html_baseurl to set the canonical URL.
# https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-html_baseurl
if version_info >= (1, 8):
    if not globals().get('html_baseurl'):
        html_baseurl = context['canonical_url']
    context['canonical_url'] = None





if 'html_context' in globals():
    
    html_context.update(context)
    
else:
    html_context = context

# Add custom RTD extension
if 'extensions' in globals():
    # Insert at the beginning because it can interfere
    # with other extensions.
    # See https://github.com/rtfd/readthedocs.org/pull/4054
    extensions.insert(0, "readthedocs_ext.readthedocs")
else:
    extensions = ["readthedocs_ext.readthedocs"]

# Add External version warning banner to the external version documentation
if 'tag' == 'external':
    extensions.insert(1, "readthedocs_ext.external_version_warning")
    readthedocs_vcs_url = 'None'
    readthedocs_build_url = 'https://readthedocs.com/projects/continuumio-conda-build/builds/1039870/'

project_language = 'en'

# User's Sphinx configurations
language_user = globals().get('language', None)
latex_engine_user = globals().get('latex_engine', None)
latex_elements_user = globals().get('latex_elements', None)

# Remove this once xindy gets installed in Docker image and XINDYOPS
# env variable is supported
# https://github.com/rtfd/readthedocs-docker-images/pull/98
latex_use_xindy = False

chinese = any([
    language_user in ('zh_CN', 'zh_TW'),
    project_language in ('zh_CN', 'zh_TW'),
])

japanese = any([
    language_user == 'ja',
    project_language == 'ja',
])

if chinese:
    latex_engine = latex_engine_user or 'xelatex'

    latex_elements_rtd = {
        'preamble': '\\usepackage[UTF8]{ctex}\n',
    }
    latex_elements = latex_elements_user or latex_elements_rtd
elif japanese:
    latex_engine = latex_engine_user or 'platex'

# Make sure our build directory is always excluded
exclude_patterns = globals().get('exclude_patterns', [])
exclude_patterns.extend(['_build'])

[rtd-command-info] start-time: 2022-08-03T23:53:19.254134Z, end-time: 2022-08-03T23:53:28.321226Z, duration: 9, exit-code: 0
python -m sphinx -T -E -b html -d _build/doctrees -D language=en . _build/html
Running Sphinx v4.2.0
loading translations [en]... done
making output directory... done
myst v0.15.2: MdParserConfig(renderer='sphinx', commonmark_only=False, enable_extensions=['amsmath', 'colon_fence', 'deflist', 'dollarmath', 'html_admonition', 'html_image', 'linkify', 'replacements', 'smartquotes', 'substitution', 'tasklist'], dmath_allow_labels=True, dmath_allow_space=True, dmath_allow_digits=True, dmath_double_inline=False, update_mathjax=True, mathjax_classes='tex2jax_process|mathjax_process|math|output_area', disable_syntax=[], url_schemes=['http', 'https', 'mailto', 'ftp'], heading_anchors=3, heading_slug_func=None, html_meta=[], footnote_transition=True, substitutions=[], sub_delimiters=['{', '}'], words_per_minute=200)
loading intersphinx inventory from https://docs.python.org/objects.inv...
intersphinx inventory has moved: https://docs.python.org/objects.inv -> https://docs.python.org/3/objects.inv
building [mo]: targets for 0 po files that are out of date
building [html]: targets for 51 source files that are out of date
updating environment: [new config] 51 added, 0 changed, 0 removed
reading sources... [  1%] concepts/channels
reading sources... [  3%] concepts/generating-index
reading sources... [  5%] concepts/index
reading sources... [  7%] concepts/package-naming-conv
reading sources... [  9%] concepts/recipe
reading sources... [ 11%] contributing-guide
reading sources... [ 13%] index
reading sources... [ 15%] install-conda-build
reading sources... [ 17%] release-notes
reading sources... [ 19%] resources/activate-scripts
reading sources... [ 21%] resources/add-win-start-menu-items
reading sources... [ 23%] resources/build-scripts
reading sources... [ 25%] resources/commands/conda-build
reading sources... [ 27%] resources/commands/conda-convert
reading sources... [ 29%] resources/commands/conda-develop
reading sources... [ 31%] resources/commands/conda-index
reading sources... [ 33%] resources/commands/conda-inspect
reading sources... [ 35%] resources/commands/conda-inspect-channels
reading sources... [ 37%] resources/commands/conda-inspect-linkages
reading sources... [ 39%] resources/commands/conda-inspect-objects
reading sources... [ 41%] resources/commands/conda-metapackage
reading sources... [ 43%] resources/commands/conda-render
reading sources... [ 45%] resources/commands/conda-skeleton
reading sources... [ 47%] resources/commands/conda-skeleton-cpan
reading sources... [ 49%] resources/commands/conda-skeleton-cran
reading sources... [ 50%] resources/commands/conda-skeleton-luarocks
reading sources... [ 52%] resources/commands/conda-skeleton-pypi
reading sources... [ 54%] resources/commands/index
reading sources... [ 56%] resources/compiler-tools
reading sources... [ 58%] resources/define-metadata
reading sources... [ 60%] resources/index
reading sources... [ 62%] resources/link-scripts
reading sources... [ 64%] resources/make-relocatable
reading sources... [ 66%] resources/package-spec
reading sources... [ 68%] resources/style-guide
reading sources... [ 70%] resources/tutorial-template
reading sources... [ 72%] resources/use-shared-libraries
reading sources... [ 74%] resources/variants
reading sources... [ 76%] user-guide/environment-variables
reading sources... [ 78%] user-guide/getting-started
reading sources... [ 80%] user-guide/index
reading sources... [ 82%] user-guide/recipes/build-without-recipe
reading sources... [ 84%] user-guide/recipes/debugging
reading sources... [ 86%] user-guide/recipes/index
reading sources... [ 88%] user-guide/recipes/sample-recipes
reading sources... [ 90%] user-guide/tutorials/build-pkgs
reading sources... [ 92%] user-guide/tutorials/build-pkgs-skeleton
reading sources... [ 94%] user-guide/tutorials/build-r-pkgs
reading sources... [ 96%] user-guide/tutorials/building-conda-packages
reading sources... [ 98%] user-guide/tutorials/index
reading sources... [100%] user-guide/wheel-files

/home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda-build/checkouts/stable/CHANGELOG.md:2518: WARNING: Substitution error:UndefinedError: 'compiler' is undefined
looking for now-outdated files... none found
pickling environment... done
checking consistency... done
preparing documents... done
writing output... [  1%] concepts/channels
writing output... [  3%] concepts/generating-index
writing output... [  5%] concepts/index
writing output... [  7%] concepts/package-naming-conv
writing output... [  9%] concepts/recipe
writing output... [ 11%] contributing-guide
writing output... [ 13%] index
writing output... [ 15%] install-conda-build
writing output... [ 17%] release-notes
writing output... [ 19%] resources/activate-scripts
writing output... [ 21%] resources/add-win-start-menu-items
writing output... [ 23%] resources/build-scripts
writing output... [ 25%] resources/commands/conda-build
writing output... [ 27%] resources/commands/conda-convert
writing output... [ 29%] resources/commands/conda-develop
writing output... [ 31%] resources/commands/conda-index
writing output... [ 33%] resources/commands/conda-inspect
writing output... [ 35%] resources/commands/conda-inspect-channels
writing output... [ 37%] resources/commands/conda-inspect-linkages
writing output... [ 39%] resources/commands/conda-inspect-objects
writing output... [ 41%] resources/commands/conda-metapackage
writing output... [ 43%] resources/commands/conda-render
writing output... [ 45%] resources/commands/conda-skeleton
writing output... [ 47%] resources/commands/conda-skeleton-cpan
writing output... [ 49%] resources/commands/conda-skeleton-cran
writing output... [ 50%] resources/commands/conda-skeleton-luarocks
writing output... [ 52%] resources/commands/conda-skeleton-pypi
writing output... [ 54%] resources/commands/index
writing output... [ 56%] resources/compiler-tools
writing output... [ 58%] resources/define-metadata
writing output... [ 60%] resources/index
writing output... [ 62%] resources/link-scripts
writing output... [ 64%] resources/make-relocatable
writing output... [ 66%] resources/package-spec
writing output... [ 68%] resources/style-guide
writing output... [ 70%] resources/tutorial-template
writing output... [ 72%] resources/use-shared-libraries
writing output... [ 74%] resources/variants
writing output... [ 76%] user-guide/environment-variables
writing output... [ 78%] user-guide/getting-started
writing output... [ 80%] user-guide/index
writing output... [ 82%] user-guide/recipes/build-without-recipe
writing output... [ 84%] user-guide/recipes/debugging
writing output... [ 86%] user-guide/recipes/index
writing output... [ 88%] user-guide/recipes/sample-recipes
writing output... [ 90%] user-guide/tutorials/build-pkgs
writing output... [ 92%] user-guide/tutorials/build-pkgs-skeleton
writing output... [ 94%] user-guide/tutorials/build-r-pkgs
writing output... [ 96%] user-guide/tutorials/building-conda-packages
writing output... [ 98%] user-guide/tutorials/index
writing output... [100%] user-guide/wheel-files

generating indices... genindex done
writing additional pages... search done
copying images... [100%] img/conda_names.png

copying downloadable files... [100%] user-guide/tutorials/meta.yaml

copying static files... done
copying extra files... done
dumping search index in English (code: en)... done
dumping object inventory... done
build succeeded, 1 warning.

The HTML pages are in _build/html.
Updating searchtools for Read the Docs search...